Microprocessor support table

This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.

An "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.

Tektronix 1240/1241

All acquisition boards are 1240D2 the 1240D1 cannot be used.

  • (*1) means that P6460 probes are always required.
  • (*2) means that P6460 probes are required for CMOS version.
  • (*3) means that P6460 or P6462 probes can be used.
Tektronix 1240/1241 ROM pack and configuration table
Micro- Processor IC package ROM pack Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Intel
8080 12RM01 X 2 4*3 Max
8031/8051 12RM99 Opt 03 UPIK40 2 4*1 12 Mhz
8085 12RM02 X 2 4*3 Max
8086 DIP 12RM03 PM201 3 X 8.0 Mhz
8088 DIP 12RM04 PM201 3 X 8.0 Mhz
80186 LCC/PGA 12RM05 PM202 3 X 8.0 Mhz
80188 LCC/PGA 12RM06 PM202 3 X 8.0 Mhz
80286 LCC/PGA 12RM08 PM204 3 X 10.0 Mhz
8096/7 12RM99 Opt 16 N/A 3 6*1 12 Mhz
Motorola
6800 12RM21 X 2 4*3 Max
6801 12RM99 Opt 05 UPIK40 2 4*3 Max
6802 12RM22 X 2 4*3 Max
6805(E2) 12RM99 Opt 06 UPIK40 2 2*1 Max
6805(E3) 12RM99 Opt 07 UPIK40 2 3*1 Max
6808 12RM23 X 2 4*3 Max
6809 12RM24 X 2 4*3 Max
6809E 12RM24 X 2 4*3 Max
68HC11 12RM99 Opt 08 N/A 2 3*1 Max
68000 DIP 12RM25 PM203 3 None 16 Mhz
68000 PGA 12RM25 PM203 3 None 16 Mhz
68008 DIP 12RM26 PM203 3 None 16 Mhz
68010 DIP 12RM27 PM203 3 None 16 Mhz
68010 PGA 12RM27 PM203 3 None 16 Mhz
68020 12RM31 PM205 3 None 25.0 Mhz
68030 12RM33 ? 3 None 25.0 Mhz
DSP56000/1 12RM99 Opt 17 NA 3 6*1 50 Mhz
Zilog
Z80 12RM41 X 2 4*1 8 Mhz
Z8001/3 12RM42 NA 3 4*3 10 Mhz
Z8002/4 12RM43 X 3 3*3 10 Mhz
Texas instrument
TMS320320/320C25 12RM99 Opt 11 NA 3 5*1 20 Mhz
TMS32010 12RM99 Opt 14 UPIK40 2 4*1 Max
Hitachi
6301/3 12RM99 Opt 09 UPIK40 2 4*3 Max
64180R0/R1 12RM99 Opt 12 NA 3 5*1 Max
Other microprocessors
6502/C02 12RM63 X 2 4*2 Max
1802/4/5/6/(A/C/AC/BC) 12RM99 Opt 22 UPIK40 2 3*1 Max
ADSP2100 12RM99 Opt 17 NA 3 6*1 Max
F9450 12RM62A NA 3 3*3 40 Mhz
MIL-Std 1705A ? ? ? ? 40 Mhz
NSC800 12RM71 X 2 4*1 Max
GM EMC 12RM99 Opt 01 UPIK40 2 4*3 Max
Other
VAXBI 12RM99 Opt 13 012-1164-00 3 6*3 Max
GPIB 12RM99 Opt 04 103-0209-00 2 2*3 Max

Tektronix 1230

The 1230DPA is required for all DPXXXX probes. All acquisition boards are 1230E1. All the software needs is included with the personnality module.

Tektronix 1230
Micro- Processor IC package ROM pack Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Intel
8031 DP8031D 1 None
8085 PM404 X None
8086 DIP DP8086D X None Max
8087 DIP DP8031D,
DP8086D
1
8088 DIP DP8086D X None Max
Motorola
6800 PM407 1 None Max
6802 PM407 1 None
6809 PM406 1 None Max
6809E PM406 1 None Max
68HC11 DPHC11Q 1 None Max
68000 DIP DP68KD 2 None Max
68000 PGA DP68KP 2 None Max
68010 DIP DP68KD 2 None Max
68010 PGA DP68KP 2 None Max
Zilog
Z80 PM402 1 None Max
Other Microprocessors
6502/C02 PM403 1 None Max
Other Microprocessors
STD PM405 1 None Max

Tektronix 1225/1220

Note that the configuration table for the 1230 is not the same as the one for it's two predecessors. The internal hardware is different enough that the 1225/1220 can only use external probes.

Tektronix 1205

Tektronix 1205
Micro- Processor IC package Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Zilog
Z80 PM302 X None 4 Mhz
Other
6502/C02 PM303 X None 4 Mhz
General PM301 X None ?

Tektronix DAS9200

Tektronix DAS9100