3S7
The Tektronix Type 3S7 is a sampling plug-in, introduced in 1971, for 560-series scopes such as the 561 and 564.
Used with the 3T7, a TDR system is formed. The 3S7/3T7 are seen on the front cover of the Tektronix TDR Measurement Concepts book. Like the 1S2, the connectors on the 3S7/3T7 are 50 Ω GR-874 connectors. A short coaxial cable carries the pulse from the front panel output of the 3T7 to the front panel input of the 3S7, where it passes through the sampling gate and out to the cable or network under test.
The interface between the GR-874 connector and the printed circuit board is described in US Patent 3,426,311.
Specifications
please add
Pictures
-
-
-
-
Front
-
Left
-
Right
-
Top
-
Bottom
-
bottom
-
bottom
-
panel wiring
Custom ICs used in the 3S7
| Page | Model | Part nos | Description | Designers | Used in |
|---|---|---|---|---|---|
| 155-0035-00 | M053B | 155-0035-00 • 155-0116-00 | quad op-amp | Mike Metcalf | 3110 • 3S7 • 3T7 • 492 • 492A • 492AP • 492P • 494 • 494P • 496 • 496P • 4010 • 4011 • 4012 • 4013 • 7L5 • 7L12 • 7L13 • 7L14 • 7L18 • 7S11 • 7T11 • 7S12 • S-6 • 1461 • 4602 • P7001 • 613 • 653 |