11201

Revision as of 04:48, 3 July 2024 by Peter (talk | contribs)

The Tektronix 11201 is a 400 MHz sampling oscilloscope. It does not take plug-ins, but it is electrically similar to the 11401 with two 11A32 plugins and uses the same firmware. The 11201 is specified to have nine bits of vertical resolution whereas the 11401 and 11402 are specified to have ten bits of vertical resolution.

Tektronix 11201
400 MHz sampling scope
Tek 11201

Produced from 1989 to 1990

Manuals

David White was the project manager for the 11201.

Key Specifications

  • please add

Internals

The 11201 has a card cage containing five boards:

  1. I/O Board (A14)
  2. Memory Management Unit Board (A15)
  3. Compressor Board (A16)
  4. Main Processor Board (A17)
  5. Memory Board (A18)

The five boards plug into the card cage interconnect, which is completely passive. All card cage interconnect connectors have 96 pins and are wired identically. The connectors have three rows of 32 pins each and resemble VME connectors.

The main microprocessor for the 11201 is an Intel 80286 with an 80287 math co-processor.

Pictures

Displays

Internal

Boards

Components

Some Parts Used in the 11201

Part Part Number(s) Class Description Used in
155-0239-00 155-0239-00 155-0239-01 155-0239-02 Hybrid integrated circuit trigger 2424L 2430 2430A 2432 2445 2465 2467 2400-series scopes 11201 11401 11402
155-0282-00 155-0282-00 Monolithic integrated circuit D/A converter 11201 11401 TSG-170 TSG-271
155-0349-00 155-0349-00 Monolithic integrated circuit custom 11201 11401
165-2065-02 165-2065-02 Hybrid integrated circuit Time Interpolator 11201 11401 11402
Intel 80286 Monolithic integrated circuit 16-bit microprocessor 11201 11401 11402
Intel 80287 Monolithic integrated circuit floating-point coprocessor 11201 11401 11402