7D20

Manuals – Specifications – Links – Pictures

The Tektronix 7D20 is a two-channel digitizing plug-in for 7000-series scopes. It is a triple-width plug-in and provides both vertical and horizontal signals to the scope.

Key Specifications

Bandwidth	0–70 MHz (DC), 10 Hz–70 MHz (AC)
Rise time	< 5 ns
Sampling Rate	40 MSa/s
Resolution	8 bit
Deflection	5 mV/Div to 5 V/Div (1–2–5)
Input impedance	1 MΩ // 20 pF
Time base	50 ns/Div — 1 μs/Div: Equivalent Time Mode 2 μs/Div — 200 μs/Div: Extended Real Time Mode 500 μs/Div — 50 ms/Div: Real Time Mode 100 ms/Div — 20 s/Div and External: Roll Mode
External clock	< 10 kHz
Memory	2 × 455 cells (alternating) analog / 1024 words digital
Features	2 channels 6 memory banks 2 cursors GPIB features: SH1 AH1 T5 L3 SR1 RL1 PP0 DC1 DT1 C0
Weight	3.9 kg (8.5 lb)

Internals

The 7D20 uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed. This design allowed the 7D20 to capture single-shot events at 40 MSamples/s even though this exceeded the speed of ADCs of the time. The 7D20 can digitally store waveforms and has a GPIB interface. A microprocessor (68B09) in the plug-in controls most of its functions.

The analog waveforms that are sent to the 7000-series mainframe are generated by vertical and horizontal DACs. The DACs outputs can be calibrated for scaling and shift so that signals are accurately displayed on the oscilloscope screen.

The 7D20 has a "roll" mode that emulates a paper roll chart, as if the waveform were being drawn by a pen on the right side of the screen while the paper is being moved to the left at a constant rate. No equivalent to "roll" exists in analog scopes. The Tektronix 2212 also has this feature.

The 7D20 can give NVRAM errors that are often easy to fix.

Links

• 7D20 page @ amplifier.cd
• http://www.barrytech.com/tektronix/tek7000/tek7d20.html
• EB5AGV's Tektronix R7603 / 7D20 page - 7D20+R7603 Repair Report
• Another 7D20 repair

Pictures

• 
• 
• 
• 
• 

  7D20 picture from manual

• 

  7D20 picture in 7603 mainframe, from manual

• 
• 
• 
• 
• 
• 
• 
• 
• 

Custom ICs used in the 7D20

Page	Model	Part nos	Description	Designers	Used in
155-0196-00	155-0196-00	155-0196-00	trigger		455 • 7D20
155-0217-00	M55D	155-0216-00 • 155-0217-00	variable-gain transconductance amplifier	Roy Hayes • Einar Traa	335 • 475 • 7D20 • FG504