Active Probes

Active Probes contain an active element like a FET or a tube right at the tip of the probe. This allows to eliminate cable loading and create higher input impedances, most useful for high frequency probing.

For a list of all active Probes also see Active oscilloscope probes.

Specification Summary (Please Expand)
Model	Attenuation	Length	Input Loading		Bandwidth GHz	Dynamic Range	Offset Range	Max. Voltage	Target Impedance	Power Source	Readout pin
			R / MΩ	C / pF
P80	1x	?	0.1	14	0.1	±0.2 V	N/A	150 V	93 Ω Diff.	Type 80 Plug-In	N/A
	2x		0.2	7.8		±0.4 V
	5x		0.5	3.3		±1 V
	10x		1	2		±2 V
	20x		2	1.4		±4 V
	50x		5	3.7		±10 V
	100x		10	1.4		±20 V
P6032	10x	6ft.	10	3.6	0.85	±1.5 V	N/A	1.5× Dyn. Range	50 Ω	4-pin 1S1 type	N
	20x			2.6		±3 V
	50x			3		±7.5 V
	100x			1.5		±15 V
	200x			1.4		±30 V
	500x			1.3		±75 V
	1000x			1.3		±150 V
P6201	100x	6ft.	1	1.5	1.1	±60 V	±200 V	200 V	50 Ω	7000 Series Lemo	Y
	10x		1	1.5	1.1	±6 V	±56 V	200 V
	1x		0.1	3	1.1	±0.6 V	±5.6 V	50 V
P6202	100x	2m	10	2	0.5	±60 V	±200 V	200 V	50 Ω	dedicated power supply	Y
	10x		10	2	0.5	±6 V	±55 V	200 V
P6202A	100x	2m	10	2	0.5	±60 V	±200 V	200 V	50 Ω	7000 Series Lemo	Y
	10x		10	2	0.5	±6 V	±55 V	200 V
P6203	10x	1.5m	10 kΩ	2	1	±10 V	±10 V	40 V	50 Ω	Tekprobe BNC connector	N/A
P6204	10x	1.5m	10	1.9	1	±10 V	±15 V	40 V	50 Ω	Tekprobe BNC connector	N/A
P6205	10x	1.5m	1	2	0.75	±10 V	N/A	40 V	50 Ω	Tekprobe BNC connector	N/A
P6206	10x	?	1	2	1	?	?	40 V	50 Ω	Tekprobe SMA connector	N/A
P6207	10x	1m	0.1	0.4	4	±4 V	±5 V	40 V	50 Ω	Tekprobe SMA connector	N/A
P6209	5x	?	20 kΩ	1	4	±2 V	±5 V	40 V	50 Ω	Tekprobe SMA connector	N/A
P6217	10x	1.5m	0.1	0.4	4	±4 V	±5 V	40 V	50 Ω	Tekprobe BNC connector	N/A
P6230 [note 1]	10x	1.5m	450 Ω	1.6	1.5	±5 V	±5 V	30 V	50 Ω	7000 Series Lemo	Y
P6231 [note 1]	10x	1.5m	450 Ω	1.6	1.5	±5 V	±5 V	30 V	50 Ω	Tekprobe BNC connector	N/A
P6241	10x	1.3m	40 kΩ	0.5	4	±4 V	±10 V	30 V	50 Ω	Tekprobe BNC connector	N/A
P6243	10x	1.3m	1 MΩ	1	1	±8 V	N/A	15 V	50 Ω	Tekprobe BNC connector	N/A
P6249	5x	1.3m	20 kΩ	1.0	4	±2 V	±5 V	30 V	50 Ω	Tekprobe BNC connector	N/A
P7240	5x	1.3m	20 kΩ	1.0	4	±2 V	±5 V	30 V	50 Ω	TekConnect connector	N/A
P7260	5x	1.3m	20 kΩ	0.5	6	±0.75 V	±5 V	30 V	50 Ω	TekConnect connector	N/A
	25x					±3 V

Notes

[note 1] These probes are active probes only for DC. For AC these probes are regular 50 Ω passive probes. For DC the load impedance is virtually connected to the offset voltage by means of an operational amplifier, so the DC loading can be tuned out for signals offset from 0V. They are listed here for completeness since Tektronix lists them as such in the Tektronix P6203 P6204 P6205 P6217 P6231 Catalog Specs (PDF).