2424L: Difference between revisions

Revision as of 04:13, 28 September 2022

Tektronix 2424L

10/100 MHz, 25 MS/s digital scope

Produced from 1989 to (?)

Manuals

Tektronix 2424L Manual
2424L Programmers Reference – please add

ROM Images

File	Pos.	Checksum

160-2558-00 (A11U420)

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2424L is a portable dual-channel, 10/100 MHz, 25 MS/s digital oscilloscope.

Key Specifications

Bandwidth	10 MHz single-event, 100 MHz repetitive (Normal and Average Modes with Repet On, or Continuous Envelope Mode; time base at 1 μs/div or faster)
Sampling rate	25 MHz (2 channels simultaneously)
Deflection	2 mV/div to 5 V/div, 1–2–5
Resolution	8 bits
Memory	1024 samples
CRT	154-0850-01, 80 mm × 100 mm (8×10 divisions), P31 phosphor, 16 kV acceleration
Power	AC, 90−132 V or 180−250 V, 48–440 Hz, 160–200 W

Pictures

2424L front
2424L top
2424L bottom

Internals

The 2424L uses a Motorola 68B09 microprocessor and a TMS9914 GPIB controller. Like in the 7D20, the ADC uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed (see Patent US 4527117A).

CRTs used in the 2424L

Page	Part nos	Description	Designers	Used in
154-0850-01	154-0850-00 • 154-0850-01	CRT		2424L • 2430 • 2430A • 2431L • 2432 • 2439 • 2440 • 2445 • 2465 • 2465A • 2465B

Custom ICs used in the 2424L

Page	Model	Part nos	Description	Designers	Used in
155-0238-00	155-0238-00	155-0238-00	preamplifier		11302A • 2424L • 2430 • 2430A • 2432 • 2445 • 2465 • 2466 • 2467
155-0239-00	155-0239-00	155-0239-00 • 155-0239-01 • 155-0239-02	trigger	Ken Schlotzhauer	2424L • 2430 • 2430A • 2432 • 2445 • 2465 • 2467 • 2400-series scopes • 11201 • 11401 • 11402
155-0294-00	155-0294-0x	155-0294-00 • 155-0294-01	Z-axis amplifier		2424L • 2440
230-0001-50	230-0001-50	230-0001-50	phase clock array		2424L • 2430 • 2430A • 2432
230-0002-50	230-0002-50	230-0002-50	trigger logic array		2424L • 2430 • 2430A • 2432

@@ Line 43: / Line 43: @@
 ==Internals==
-The 2424L uses a [[Motorola 6809|Motorola 68B09]] microprocessor and a [[TMS9914]] GPIB controller.
+The 2424L uses a [[Motorola 6809|Motorola 68B09]] microprocessor and a [[TMS9914]] GPIB controller.  Like in the [[7D20]], the ADC uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed (see [[Patent US 4527117A]]).
 {{CRTs|2424L}}