1A5

Manuals – Specifications – Links – Pictures

The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes. It was designed by Bill DeVey after consultation with John Kobbe.

It has an Amphenol 165 series connector on the front panel for direct connection of the Type P6046 Active Differential Probe.

Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.

Key Specifications

Bandwidth	50 MHz down to 5 mV/div, 40 MHz at 1 mV/div
Deflection	1 mV/div to 20 V/div, 1−2−5
Common-mode rejection	20,000:1 DC to 100kHz, 10,000:1 up to 1 MHz, 200:1 at 20 MHz

Like most Tektronix differential plug-ins, the 1A5 has three modes: V_A−V_C, V_A−V_B, and V_C−V_B.

V_C is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).

Pictures

• 
• 
• 
• 
• 
• 
• 
• 
• 
•