4S1: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
(template)
Line 1: Line 1:
The Tektronix Type 4S1 is a dual-trace [[sampling_oscilloscope|sampling]] unit for the [[661]].
{{Plugin Sidebar|
title=Tektronix 4S1|
summary=Dual trace sampling unit|
image=Image needed.jpg |
caption=4S1 front view image needed |
years=1962 – ? |
type=Sampling Plugin|
series=[[661]]|
manuals=
* [http://w140.com/kurt/4s1.pdf 4S1 manual without schematics]
* [http://w140.com/kurt/4s1/ 4S1 schematics]
* [http://w140.com/tek_4s1_late.pdf Late Issue Tektronix 4S1 Manual (PDF)]
* [http://w140.com/tek_661_4s1_5t1_preliminary.pdf Tek 661 4S1 5T1 Preliminary Manual (PDF)]
}}
The '''Tektronix Type 4S1''' is a dual-trace [[sampling_oscilloscope|sampling]] unit for the [[661]].
The 4S1 was developed in 1961 and [[introduced in 1962]].
The 4S1 was developed in 1961 and [[introduced in 1962]].
Each channel has a trigger pickoff, a [[delay line]], and a sampler.  
 
Specified rise time is 350ps.
Each channel has a trigger pickoff, a [[delay line]], and a sampler. Specified rise time is 350 ps.
The sampling pulses for each channel are generated by a step recovery diode.  
The sampling pulses for each channel are generated by a step recovery diode.  


== Sampling Bridge ==
==Description==
=== Sampling Bridge ===
The sampling pulses are fed to a sampling bridge made of four [[sampling diodes|GaAs diodes]].   
The sampling pulses are fed to a sampling bridge made of four [[sampling diodes|GaAs diodes]].   
These diodes are fragile and exact replacements are hard to find.   
These diodes are fragile and exact replacements are hard to find.   
Line 11: Line 26:
diodes such as those in HP/Agilent's HSMS-28x series.
diodes such as those in HP/Agilent's HSMS-28x series.


== Dual-trace and X-Y Modes ==
=== Dual-trace and X-Y Modes ===
The 4S1 has a dual-trace mode, where the A waveform and the B waveform  
The 4S1 has a dual-trace mode, where the A waveform and the B waveform  
are both displayed in the time domain at the same time with a single  
are both displayed in the time domain at the same time with a single  
Line 19: Line 34:
through [[Connectors#GR-874|GR-874 connectors]] on the front panel.
through [[Connectors#GR-874|GR-874 connectors]] on the front panel.


== Trigger Amplifier ==
=== Trigger Amplifier ===
The 4S1 uses an unusual trigger amplifier with two trigger signal paths.  One path is for low frequencies, the other for high frequencies.
The 4S1 uses an unusual trigger amplifier with two trigger signal paths.  One path is for low frequencies, the other for high frequencies.
(A similar approach was also used in the main vertical signal path of the [[7A29]] several years later.)
(A similar approach was also used in the main vertical signal path of the [[7A29]] several years later.)
From serial number 101 to 1349, the low frequency path starts with a 25K resistor that DC-couples the input signal to a  
 
[[2N1429]] PNP emitter-follower stage.   
From serial number 101 to 1349, the low frequency path starts with a 25 kΩ resistor that DC-couples the input signal to a  
After that is a [[151-103]] NPN common-emitter.  The high frequency path starts
[[2N1429]] PNP emitter-follower stage.  After that is a [[151-103]] NPN common-emitter.  The high frequency path starts
with a trigger pickoff transformer on the input.  The pickoff signal feeds a common-base amplifier
with a trigger pickoff transformer on the input.  The pickoff signal feeds a common-base amplifier
that uses a [[2N700]] PNP transistor.  The low frequency and high frequency trigger paths meet at the trigger output of the
that uses a [[2N700]] PNP transistor.  The low frequency and high frequency trigger paths meet at the trigger output of the
Line 31: Line 46:
to amplify the entire frequency range.
to amplify the entire frequency range.


== Comparison with S1 Sampling Heads ==
=== Comparison with S1 Sampling Heads ===
The sampler board in the 4S1 is roughly equivalent to a pair of [[S1]] sampling heads.
The sampler board in the 4S1 is roughly equivalent to a pair of [[S-1]] sampling heads.
A short piece of RG/174 coax connects the 661 timing pulse coaxial connector to the
A short piece of RG/174 coax connects the 661 timing pulse coaxial connector to the
[[Connectors#SMB|SMB]] timing pulse input on the 4S1 sampler board.  This signal triggers
[[Connectors#SMB|SMB]] timing pulse input on the 4S1 sampler board.  This signal triggers
Line 44: Line 59:
sub-chassis.
sub-chassis.


* [http://w140.com/kurt/4s1.pdf 4S1 manual without schematics]
==Specifications==
* [http://w140.com/kurt/4s1/ 4S1 schematics]
[[Category:Specifications needed]] ''please add''
* [http://w140.com/tek_4s1_late.pdf Late Issue Tektronix 4S1 Manual (PDF)]
 
* [http://w140.com/tek_661_4s1_5t1_preliminary.pdf Tek 661 4S1 5T1 Preliminary Manual (PDF)]
==Pictures==


<gallery>
<gallery>

Revision as of 04:34, 1 July 2014

{{{manufacturer}}} Sampling Plugin
Dual trace sampling unit
4S1 front view image needed

Compatible with [[661]]

Produced from {{{introduced}}} to {{{discontinued}}}

Manuals
[[Category:Introduced in {{{introduced}}}]]
Manuals – Specifications – Links – Pictures

The Tektronix Type 4S1 is a dual-trace sampling unit for the 661. The 4S1 was developed in 1961 and introduced in 1962.

Each channel has a trigger pickoff, a delay line, and a sampler. Specified rise time is 350 ps. The sampling pulses for each channel are generated by a step recovery diode.

Description

Sampling Bridge

The sampling pulses are fed to a sampling bridge made of four GaAs diodes. These diodes are fragile and exact replacements are hard to find. People have improvised replacements using modern integrated Schottky diodes such as those in HP/Agilent's HSMS-28x series.

Dual-trace and X-Y Modes

The 4S1 has a dual-trace mode, where the A waveform and the B waveform are both displayed in the time domain at the same time with a single trigger source and a single equivalent-time sweep rate. Another mode is called "A vert/B horiz". This mode is used in conjunction with an X-Y mode switch on the panel of the 661. The signals enter the 4S1 through GR-874 connectors on the front panel.

Trigger Amplifier

The 4S1 uses an unusual trigger amplifier with two trigger signal paths. One path is for low frequencies, the other for high frequencies. (A similar approach was also used in the main vertical signal path of the 7A29 several years later.)

From serial number 101 to 1349, the low frequency path starts with a 25 kΩ resistor that DC-couples the input signal to a 2N1429 PNP emitter-follower stage. After that is a 151-103 NPN common-emitter. The high frequency path starts with a trigger pickoff transformer on the input. The pickoff signal feeds a common-base amplifier that uses a 2N700 PNP transistor. The low frequency and high frequency trigger paths meet at the trigger output of the 4S1. From there, the trigger signal passes through the 661, and into a 5T1 or 5T3. 4S1 units with serial number 1350 and up use a slightly less complex trigger amplifier circuit. The later circuit uses a TA2333 silicon NPN transistor to amplify the entire frequency range.

Comparison with S1 Sampling Heads

The sampler board in the 4S1 is roughly equivalent to a pair of S-1 sampling heads. A short piece of RG/174 coax connects the 661 timing pulse coaxial connector to the SMB timing pulse input on the 4S1 sampler board. This signal triggers a blocking oscillator which drives a snap-off diode, D2004, which generates the fast falling edge for the channel A and channel B sampling bridges. The 4S1 uses 7586 triodes as high-impedance buffers between the sampling bridge and the amplification that follows.

The 4S1 has a main chassis and sub-chassis that plug into it. There is a sub-chassis extension, part number 012-069, that allows maintenance of the sub-chassis.

Specifications

please add

Pictures

  • top view of 4S1

    top view of 4S1

  • Coaxial interconnect from timing plug-in goes through the mainframe, into the 4S1, and ends here, at the sampler.

    Coaxial interconnect from timing plug-in goes through the mainframe, into the 4S1, and ends here, at the sampler.

  • This is the sampler. The GaAs sampling diodes are arranged in a diamond shape and are directly connected to the socket from the delay line.

    This is the sampler. The GaAs sampling diodes are arranged in a diamond shape and are directly connected to the socket from the delay line.

  • The delay line is a coil of coax going from the trigger pickoff to the sampler.

    The delay line is a coil of coax going from the trigger pickoff to the sampler.

  • LF and HF trigger pickoff

    LF and HF trigger pickoff

  • trigger pickoff

    trigger pickoff

  • trigger pickoff

    trigger pickoff

  • Bottom wiring

    Bottom wiring

  • Dual trace card

    Dual trace card

  • Dual trace card

    Dual trace card

  • Dual trace card

    Dual trace card

  • Inverter card

    Inverter card

  • Inverter card

    Inverter card

  • Inverter card

    Inverter card

  • Memory card

    Memory card

  • Memory card

    Memory card

  • Memory card

    Memory card

  • Amp card

    Amp card

  • Amp card

    Amp card

  • Amp card

    Amp card

  • Sampler card

    Sampler card

  • Sampler card

    Sampler card

  • Sampler card

    Sampler card

Retrieved from "https://w140.com/tekwiki/index.php?title=4S1&oldid=10635"