Probe power: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 7: | Line 7: | ||
* The [[4S1]] provides +100 V, −12.6 V, and −25.2 V. | * The [[4S1]] provides +100 V, −12.6 V, and −25.2 V. | ||
* The [[N]] provides +100 V and 6.3V AC for Type [[P6025]] cathode-follower probes. | * The [[N]] provides +100 V and 6.3V AC for Type [[P6025]] cathode-follower probes. | ||
* The | * The [[015-0073-00]] has a 3-pin probe power connector (Sealectro 55-850-0018-98(?)), the [[454]]/[[454A]] a pair of these, providing +12.5 V and −12.5 V for probes [[P6045]], [[282]], ... | ||
* [[7000-series scopes]] (not all models), [[475]], [[485]], the [[1101]] probe power supply, and the [[2707]] tracking generator provide +15 V, +5 V, and −15 V through a [[LEMO S-series connector]]. | * [[7000-series scopes]] (not all models), [[475]], [[485]], the [[1101]] probe power supply, and the [[2707]] tracking generator provide +15 V, +5 V, and −15 V through a [[LEMO S-series connector]]. | ||
* [[Tekprobe BNC connector|TekProbe BNC]], [[Tekprobe SMA connector|TekProbe SMA]] and [[TekConnect interface|TekConnect]] are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe connected. | * [[Tekprobe BNC connector|TekProbe BNC]], [[Tekprobe SMA connector|TekProbe SMA]] and [[TekConnect interface|TekConnect]] are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe connected. |
Revision as of 13:10, 21 January 2019
Many Tektronix instruments provide power for active probes. There have been several distinct versions:
- The 513 provides +225 V, +6.3 V, and a variable supply producing +15 V to +150 V, on a 4-pin connector.
- The 517 and 128 provide +120 V and +6.3 V for Type P500CF cathode-follower probes.
- The 1S1, 3S1 and 3S76 provide +100 V and −12.2 V for Type P6032 cathode-follower probes.
- The 4S1 provides +100 V, −12.6 V, and −25.2 V.
- The N provides +100 V and 6.3V AC for Type P6025 cathode-follower probes.
- The 015-0073-00 has a 3-pin probe power connector (Sealectro 55-850-0018-98(?)), the 454/454A a pair of these, providing +12.5 V and −12.5 V for probes P6045, 282, ...
- 7000-series scopes (not all models), 475, 485, the 1101 probe power supply, and the 2707 tracking generator provide +15 V, +5 V, and −15 V through a LEMO S-series connector.
- TekProbe BNC, TekProbe SMA and TekConnect are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe connected.
-
Probe power connector on rear panel of 7104
-
7000 series probe power pinout
-
TekProbe connector
-
TekProbe 2 Pinout
-
TekProbe SMA connector
-
513 probe power connector
-
454/015-0073-00 probe power connector