Probe power: Difference between revisions

Revision as of 13:53, 28 October 2021

Many Tektronix instruments provide power for active probes. A number of different configurations were used over time:

The 513 provides +225 V, +6.3 V, and a variable supply producing +15 V to +150 V, on a 4-pin connector.
The 517, 128 and 1121 provide +120 V and +6.3 V for P170CF or P500CF cathode-follower probes.
The 1S1, 3S1,3S76, and 4S1 provide +100 V and −12.2 V for P6032 cathode-follower probes or 282 active adapters.
The 4S1 provides +100 V, −12.6 V, and −25.2 V for P6032 probes or 282 active adapters.
The N provides +100 V and 6.3 V_AC for P6025 cathode-follower probes.
The 015-0073-00 has a 3-pin probe power connector (Sealectro 55-850-0018-98(?)), the 454/454A a pair of these, providing +12.5 V and −12.5 V for probes P6045, ...
7000-series scopes (not all models), 475, 485, the 1101 probe power supply, the 2707 tracking generator, and most 49X-Series Spectrum Analyzers provide +15 V, +5 V, and −15 V through a LEMO S-series connector for probes like P6201, P6202A, P6230, P6051 etc.
TekProbe BNC, TekProbe SMA and TekConnect are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe connected.

@@ Line 4: / Line 4: @@
 * The [[513]] provides +225 V, +6.3 V, and a variable supply producing +15 V to +150 V, on a 4-pin connector.
 * The [[517]], [[128]] and [[1121]] provide +120 V and +6.3 V for [[P170CF]] or [[P500CF]] cathode-follower probes.
-* The [[1S1]], [[3S1]] and [[3S76]] provide +100 V and −12.2 V for [[P6032]] cathode-follower probes or [[282]] active adapters.
+* The [[1S1]], [[3S1]],[[3S76]], and [[4S1]] provide +100 V and −12.2 V for [[P6032]] cathode-follower probes or [[282]] active adapters.
 * The [[4S1]] provides +100 V, −12.6 V, and −25.2 V for [[P6032]] probes or [[282]] active adapters.
 * The [[N]] provides +100 V and 6.3 V<sub>AC</sub> for [[P6025]] cathode-follower probes.