26G2

From TekWiki
Revision as of 06:15, 16 August 2021 by Peter (talk | contribs)
Jump to navigation Jump to search

The Tektronix 26G2 is a ramp generator plug-in for the 2600 series mainframes.

It generates ramps with duration ranging from 10 μs to 10 seconds.

There are outputs with different combinations of amplitude and output impedance. The 10 V output has very low output impedance (due to negative feedback) and has a current limiting circuit that limits it to about 33 mA. The 1 V output has a resistive output impedance of 50 Ω.

The 26G2 uses a 155-0029-01 integrated circuit for the trigger and a 155-0028-00 miller integrator chip to generate the ramp. Discrete bipolar transistors are used for the output amplifiers.

Custom ICs used in the 26G2

Page Model Part nos Description Designers Used in
155-0028-00 M018 155-0028-00 155-0028-01 155-0042-00 155-0042-01 155-0042-02 155-0042-03 Miller integrator and delay pickoff Joe Burger 5030 R5030 5031 R5031 1401 1401A 1480 1481 1482 1485 26G1 26G2 26G3 314 335 432 434 4701 5B10N 5B12N 5B31 5B40 5B42 5S14N 7B52 7B53A 7B53N 7L12 7L13 7L14 7L18 7S14 AN/USM-281C RG501 Telequipment D63 Telequipment DM63
155-0029-01 155-0029-00,155-0029-01 155-0029-01 Trigger 26G1 26G2 26G3 4701 5030 R5030 5031 R5031 5B10N
155-0056-00 M042E 155-0056-00 155-0056-01 sweep control Val Garuts 26G1 26G2 26G3 314 4701 5B10N 5B12N 5S14N 7L5 7L12 7L13 7L14 7L18 7S14 RG501 Telequipment D63 Telequipment DM63