7S11: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
series=[[7000-series scopes]]| | series=[[7000-series scopes]]| | ||
manuals= | manuals= | ||
* [ | * [[Media:070-0985-00.pdf|Tektronix 7S11 Manual]] (OCR, PDF) | ||
* [[Media:TM-11-6625-2750-14&P.pdf|TM-11-6625-2750-14&P - 7S11 Operator/Service]] (PDF) | * [[Media:TM-11-6625-2750-14&P.pdf|TM-11-6625-2750-14&P - 7S11 Operator/Service]] (PDF) | ||
}} | }} | ||
Revision as of 15:42, 25 May 2021
The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.
It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode.
The dc offset voltage as well as the vertical display signal are accessible on the front panel through Pin Tip jacks.
Key Specifications
| Deflection factor | 2 to 200 in 1−2−5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW) |
|---|---|
| DC Offset range | ±1 V |
| Offset output | 10 × offset voltage (±10 V), source impedance 10 kΩ, 2 mm Pin Tip connector |
| Vertical signal output | 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ, 2 mm Pin Tip connector |
| Delay range | at least 10 ns |
| Weight | 0.9 kg (3.25 lbs) |
Internals
The 7S11 does not contain integrated circuits (except dual transistors).
Links
Pictures
-
7S11 with inserted S-4 head
-
7S11 with empty plugin bay
-
7S11 with inserted S-6 sampling head
-
spring-loaded contact block (right)
-
right side, cover removed
-
left side, cover removed
-
right side
-
left side
-
7S11 with S-1
