308: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(38 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:Tek 308 10.jpg|350px|thumb|right|Tektronix 308]]
{{Instrument Sidebar
|class=Logic Analyzer
|manufacturer=Sony/Tektronix
|series=
|model=308
|summary=20 MHz 8-ch Logic Analyzer
|image=308-timing.jpg
|caption=Sony/Tektronix 308
|introduced=1980
|discontinued=1986
|designers=
|manuals=
* [[Media:070-2663-00.pdf | Tek 308 Operator's Manual]]
* [[Media:070-2662-00.pdf | Tek 308 Service manual, Oct 1979]] (OCR)
* [[Media:070-2662-00 revised september 1986.pdf|Tek 308 Service manual, Sept 1986]]
* [[Media:Tek_308_logic_analyzer_+_probes_(1979)_SM.pdf | Tek 308 Service manual + probes]] (OCR)
====ROM images====
* [[Media:160-0768-00.bin|160-0768-00.bin]] U430 - 0x0000
* [[Media:160-0769-00.bin|160-0769-00.bin]] U432 - 0x2000
* [[Media:160-0770-00.bin|160-0770-00.bin]] U434 - 0x4000
* [[Media:160-0797-00.bin|160-0797-00.bin]] U486 - CharGen
}}
The '''Sony/Tektronix 308''' is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and [[signature analysis]] modes.


The '''Tektronix 308''' is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes.
The 308 uses two probes, the standard [[P6451]] 8-channel + clock data acquisition probe, and the optional 16-channel [[P6406]] word recognizer probe. Both use  [[012-0747-00]] cable harnesses to attach to the data source.


The 308 uses two probes, the standard [[P6451]] 8-channel + clock data acquisition probe, and the optional 16-channel [[P6406]] word recognizer probe. Both use [[012-0747-00]] cable harnesses to attach to the data source.
{{BeginSpecs}}
{{SpecGroup | Inputs}}
{{Spec | Data | Eight data channels + 1 clock channel ([[P6451]] probe), impedance 1 MΩ // 5 pF, max. ±40 V nondestructive, logic threshold fixed 1.4 V (TTL) or variable from −12 V to +12 V }}
{{Spec | Word recognizer | Sixteen TTL inputs (+40/−400 μA max.), max. +15/−1 V  }}
{{Spec | Serial | [[BNC connector]], 1 MΩ // 40 pF, max. ±250 V on BNC; used with [[P6107]] probe, 10 MΩ // 13 pF, max. ±500 V}}
{{Spec | Qualifier  | [[BNC connector]], 10 kΩ, max. +10/−5 V }}
{{SpecGroup | Acquisition}}
{{Spec | Clock | 50 ns to 200 ms per sample (1-2-5 sequence) or external down to 50 ns }}
{{Spec | Timing | Data setup time min. 25 ns, hold time min. 0 ns }}
{{Spec | Memory | 2 × 252 eight-bit words (acquisition + reference) }}
{{Spec | Trigger mode | PRE (trigger at memory location 240) or POST (location 13) }}
{{Spec | Trigger delay | 0-65535 clock periods }}
{{Spec | Serial data | 5, 6, 7 or 8 bits per character, asynchronous (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1900, 2400, 4800 or 9600 bits/s or external up to 9600 bits/s) or synchronous up to 9600 bits/s }}
{{Spec | Signature analysis | 20 MHz via serial probe input (data) and P6451 (0 start, 1 stop, C clock); up to 8 recent signatures displayed }}
{{SpecGroup | Display }}
{{Spec | CRT | [[154-0814-00]], 6.8 cm × 5.4 cm, P4 phosphor (white) }}
{{SpecGroup | General }}
{{Spec | Power | 90-132 V or 180-250 V, 48-440 Hz }}
{{Spec | Weight | 3.7 kg (8.16 lb) }}
{{EndSpecs}}


==Manuals==
==Links==
* [http://w140.com/tek_308_instructions.pdf Tektronix 308 Instruction Manual (PDF)]
* [https://www.radiomuseum.org/r/sonytek_data_analyzer_308.html Tek 308 @ radiomuseum.org]
{{Documents|Link=308}}
{{PatentLinks|308}}


==Specifications==
==Internals==
[[Category:Specifications needed]] ''please add''
The 308 is built around an [[Intel 8085]]A microprocessor. The display is a magnetically deflected raster-scan CRT.
The only Tek-specific IC in the 308 is a [[155-0067-02]] SMPS controller.


==Pictures==
==Pictures==
<gallery>
<gallery>
Tek 308 10.jpg
308-timing.jpg | 308 display, timing mode (binary counter example)
308-state.jpg | 308 display, state mode (binary counter example)
Tek 308 3.jpg
Tek 308 3.jpg
Tek 308 4.jpg
Tek 308 4.jpg
Line 19: Line 64:
Tek 308 6.jpg
Tek 308 6.jpg
Tek 308 7.jpg
Tek 308 7.jpg
Tek 308 8.jpg
Tek 308 9.jpg
Tek 308 11.jpg
Tek 308 11.jpg
Tek 308 101.jpg
Tek 308 102.jpg
Tek 308 103.jpg
Tek 308 104.jpg
Tek 308 105.jpg
Tek 308 106.jpg
Tek 308 1.jpg
Tek 308 2.jpg
Tek 308 10.jpg
</gallery>
'''Internals'''
<gallery>
Tek308 top l.jpg        | Top left
Tek308 top r1.jpg      | Top right
Tek308 top r2.jpg      | Top right (2)
Tek308_unfolding.jpg    | Boards unfolding
Tek308_unfolding_2.jpg  | Boards unfolding (2)
Tek308 input.jpg        | Input board
Tek308_trigger.jpg      | Trigger board
Tek308 boards back.jpg  | back side of input and trigger boards
Tek308 sig.jpg          | Signature/Serial board
Tek308 cpu.jpg          | CPU board
Tek308 crt.jpg          | CRT module
Tek308 psu top.jpg      | Power supply, top
Tek308 psu bot.jpg      | Power supply, bottom
308_PSU_Internals1.jpg  | Internal side of the power supply
308_mains_input_PCB.jpg | Internal side of the power supply
Tek308 bot.jpg          | Bottom (CRT board and card cage)
Tek_308_under_SN303537-UP.jpg | Bottom CRT board SN303537-UP
</gallery>
'''Probes'''
<gallery>
Tek 308 8.jpg | [[P6451]] probe
Tek 308 9.jpg | P6451 probe
P6451-int-1.jpg | P6451 probe internal, PCB front
P6451-int-2.jpg | P6451 probe internal, PCB back
p6406-1.jpg | [[P6406]] word recognizer probe
p6406-2.jpg | P6406 case close-up
p6406-3.jpg | P6406 PCB front
p6406-4.jpg | P6406 PCB back
P64xx-jumper.jpg | Using P64xx probes with jumper wires
</gallery>
</gallery>


==Components==
{{Parts|308}}
{{PatentLinks|308}}


[[Category:Logic Analyzers]]
[[Category:Logic analyzers]]
[[Category:Introduced in 1980]]

Latest revision as of 05:13, 14 October 2024

Sony/Tektronix 308
20 MHz 8-ch Logic Analyzer
Sony/Tektronix 308

Produced from 1980 to 1986

Manuals

ROM images

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Sony/Tektronix 308 is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes.

The 308 uses two probes, the standard P6451 8-channel + clock data acquisition probe, and the optional 16-channel P6406 word recognizer probe. Both use 012-0747-00 cable harnesses to attach to the data source.

Key Specifications

     — Inputs
Data Eight data channels + 1 clock channel (P6451 probe), impedance 1 MΩ // 5 pF, max. ±40 V nondestructive, logic threshold fixed 1.4 V (TTL) or variable from −12 V to +12 V
Word recognizer Sixteen TTL inputs (+40/−400 μA max.), max. +15/−1 V
Serial BNC connector, 1 MΩ // 40 pF, max. ±250 V on BNC; used with P6107 probe, 10 MΩ // 13 pF, max. ±500 V
Qualifier BNC connector, 10 kΩ, max. +10/−5 V
     — Acquisition
Clock 50 ns to 200 ms per sample (1-2-5 sequence) or external down to 50 ns
Timing Data setup time min. 25 ns, hold time min. 0 ns
Memory 2 × 252 eight-bit words (acquisition + reference)
Trigger mode PRE (trigger at memory location 240) or POST (location 13)
Trigger delay 0-65535 clock periods
Serial data 5, 6, 7 or 8 bits per character, asynchronous (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1900, 2400, 4800 or 9600 bits/s or external up to 9600 bits/s) or synchronous up to 9600 bits/s
Signature analysis 20 MHz via serial probe input (data) and P6451 (0 start, 1 stop, C clock); up to 8 recent signatures displayed
     — Display
CRT 154-0814-00, 6.8 cm × 5.4 cm, P4 phosphor (white)
     — General
Power 90-132 V or 180-250 V, 48-440 Hz
Weight 3.7 kg (8.16 lb)

Links

Documents Referencing 308

Document Class Title Authors Year Links
Tekscope 1980 V12 N1.pdf Article New Products 1980
Tekscope 1980 V12 N2.pdf Article Portable Analyzer Speeds Test and Service of Microprocessor-Based System Ed Averill John Huber 1980

Patents that may apply to 308

Page Title Inventors Filing date Grant date Links
Patent US 3976864A Apparatus and method for testing digital circuits Gary B. Gordon George A. Haag Jan R. Hofland Daniel I. Kolody 1974-09-03 1976-08-24

Internals

The 308 is built around an Intel 8085A microprocessor. The display is a magnetically deflected raster-scan CRT. The only Tek-specific IC in the 308 is a 155-0067-02 SMPS controller.

Pictures

Internals

Probes

Components

Some Parts Used in the 308

Part Part Number(s) Class Description Used in
154-0814-00 154-0814-00 CRT CRT 308
155-0067-02 155-0067-00 155-0067-02 155-0067-03 Monolithic integrated circuit SMPS controller 7704A 7834 7844 7854 7904 R7903 7904 7904A 7934 R7912 7912AD 7912HB 7934 7104 R7103 308 434 485 690 P7001
2316E Monolithic integrated circuit 2K×8 ROM 308
2364 Monolithic integrated circuit 8K×8 ROM 308
Intel 8085A 156-1088-00 Monolithic integrated circuit 8-bit microprocessor 308 468 4025 7A42 7D02 AFG5101 AFG5102 PFG5105


Patents that may apply to 308

Page Title Inventors Filing date Grant date Links
Patent US 3976864A Apparatus and method for testing digital circuits Gary B. Gordon George A. Haag Jan R. Hofland Daniel I. Kolody 1974-09-03 1976-08-24