S: Difference between revisions

Latest revision as of 07:23, 6 December 2023

Tektronix Type S
Diode recovery tester plug-in Type S front view Compatible with 500-series scopes Produced from 1960 to 1967 Manuals Tektronix Type S Instruction Manual (OCR) Tektronix Type S factory calibration procedure (OCR) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix Type S is a 500-series plug-in for measuring semiconductor diode recovery characteristics.

It can be thought of as having two parts, a stimulus subsystem and a measurement subsystem. The stimulus comes from mercury switch that drives a 6GM8/ECC86 tube that operates in a current-steering mode. The measurement subsystem is a wideband amplifier that converts the single-ended voltage on the diode under test to the differential signal that the oscilloscope mainframe takes. One terminal of the diode is grounded.

Measurements with the Type S are typically made by applying a current step to the diode while observing the voltage across the diode.

The Type S was introduced in 1960 and produced through 1966.

Key Specifications

Current ranges	Forward – 1, 2, 5, 10, and 20 mA; Reverse – 0, 0.1, 0.2, 0.5, 1.0, and 2.0 mA
Vertical Deflection	50 or 500 mV/div
Shunt Capacitance	~16 pF at 50 mV/div, ~9 pF at 500 mV/div
Rise time	1 ns

Pictures

Front
Chassis
Chassis bottom
Mercury switch

Components

Some Parts Used in the S

Part	Part Number(s)	Class	Description	Used in
12AT7	154-0039-00	Vacuum Tube (Dual Triode)	dual high-gain triode	161 • 180 • 310 • 310A • 315 • 316 • 360 • 502 • 502A • 511A • 512 • 513 • 513D • 514 • 514AD • 514D • 516 • 524 • 529 • RM529 • 544 • 546 • 547 • 556 • 565 • 570 • 3A2 • 75 • 3A75 • 1M1 • A • B • C • G • H • K • L • ML • M • N • K • R • S • Z • Keithley 610B
12AU6	154-0040-00	Vacuum Tube (Pentode)	RF pentode	81 • 112 • 1L10 • 1L20 • 1L60 • 3L10 • 512 • 556 • 575 • 545 • 547 • 549 • 581 • 585 • A • B • C • G • K • H • L • ML • M • N • O • R • S • Z
6AK5	154-0014-00 • 154-0206-00 • 154-0084-00	Vacuum Tube (Pentode)	RF pentode	B • C • CA • G • K • L • ML • S • Z • 517 • 517A • 524
6GM8	154-259 • 154-0259-00	Vacuum Tube (Dual Triode)	dual triode	81 • 516 • S

@@ Line 1: / Line 1: @@
-{{Plugin Sidebar 2|
+{{Plugin Sidebar
-title=Tektronix Type S|
+|manufacturer=Tektronix
-summary=Diode recovery tester plug-in|
+|series=500-series scopes
-image=Tek type s.jpg |
+|type=Type S
-caption=Type S front view|
+|summary=Diode recovery tester plug-in
-introduced=1960 |
+|image=Tek_Type_S_Front–Tight.jpg
-discontinued=1967 |
+|caption=Type S front view
-series=[[500-series scopes]]|
+|introduced=1960
-manuals=
+|discontinued=1967
-* [http://w140.com/kurt/tektronix_type_s.pdf Type S manual]
+|designers=
-* [http://w140.com/kurt/tek_type_s_schematics.pdf Type S schematics only]
+|manuals=
-<!-- * [http://w140.com/tek_fcp/tek_type_s_factory_cal_proc.pdf Type S factory calibration procedure] -->
+* [[Media:070-223.pdf|Tektronix Type S Instruction Manual]] (OCR)
-* [[Media:tek_type_s_fcp.pdf|Tektronix Type S factory calibration procedure (PDF, OCR)]]
+* [[Media:tek_type_s_fcp.pdf|Tektronix Type S factory calibration procedure]] (OCR)
 }}
-The '''Tektronix Type S''' is a plug-in for measuring semiconductor diode recovery characteristics.
+The '''Tektronix Type S''' is a [[500-series scopes|500-series]] plug-in for measuring semiconductor diode recovery characteristics.
-It fits in [[500-series scopes]].
-It can be thought of as having two parts:
+It can be thought of as having two parts, a stimulus subsystem and a measurement subsystem.
-a stimulus subsystem and a measurement subsystem.
 The stimulus comes from [[mercury switch]] that drives a [[ECC86|6GM8/ECC86]] tube that operates in a current-steering mode.
-The measurement subsystem is a wideband amplifier that converts the single-ended voltage on the diode under test to the
+The measurement subsystem is a wideband amplifier that converts the single-ended voltage on the diode under test to the differential signal that the oscilloscope mainframe takes.
-differential signal that the oscilloscope mainframe takes.
 One terminal of the diode is grounded.
-Measurements with the Type S are typically made by applying a current step to the diode while
+Measurements with the Type S are typically made by applying a current step to the diode while observing the voltage across the diode.
-observing the voltage across the diode.
 The Type S was [[introduced in 1960]] and produced through 1966.
-==Specifications==
+{{BeginSpecs}}
-[[Category:Specifications needed]]''please add''
+{{Spec|Current ranges      | Forward – 1, 2, 5, 10, and 20 mA; Reverse – 0, 0.1, 0.2, 0.5, 1.0, and 2.0 mA }}
+{{Spec|Vertical Deflection | 50 or 500 mV/div }}
+{{Spec|Shunt Capacitance   | ~16 pF at 50 mV/div, ~9 pF at 500 mV/div }}
+{{Spec|Rise time           | 1 ns }}
+{{EndSpecs}}
 ==Pictures==
 <gallery>
+Tek_Type_S_Front.jpg
+Tek_Type_S_Right.jpg
+Tek_Type_S_Left.jpg
+Tek_Type_S_Top.jpg
+Tek_Type_S_Bottom.jpg
 Tek s schem b.png
 Tek_type_s.jpg|Front
@@ Line 37: / Line 43: @@
 S_3.JPG|Chassis bottom
 S_4.JPG|Mercury switch
+Tek type s front2.jpeg
 </gallery>
+==Components==
+{{Parts|S}}
 [[Category:500 series plugins]]
 [[Category:Diode testers]]