P6407: Difference between revisions

Revision as of 22:18, 13 August 2017

The Tektronix P6407 is a 17-bit Word Recognizer Probe for the 2445 Opt. 09, 2465 Opt. 09, 2430A Opt. 03, 2432A Opt. 03 and 2440 Opt. 03 scopes. It connects to the scope through a 6-pin LEMO S-series connector on the rear panel.

Input lead sets (same as for the P6451, P6406, P6460 and others):

012-0747-00 - standard 10-wire 25 cm with pluggable probe tips
012-0655-01 - ten individual 40 cm leads
012-0655-02 - ten individual 8 cm leads
012-0670-00 - ten individual 16 cm leads
012-0800-00 - 10-wire 10 cm

The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Manuals

Key Specifications

Input voltage	-0.5 V to 5.5 V Peak max.
Input current	20 µA max. at 2.7 V, 0.6 mA max. at 0.5 V
Speed	Up to 10 MHz without External Clock, 20 MHz with External Clock
Features	17-bit, TTL Compatible

Internals

The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the P6406. Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable.

Links

P6407 @ barrytech.com

Pictures

P6407 probe
Input for P6407 on a 2440 Opt.03

@@ Line 1: / Line 1: @@
 [[File:P6407.jpg|thumb|350px|right|P6407]]
-The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes.
+The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes. It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel.
 Input lead sets (same as for the [[P6451]], [[P6406]], [[P6460]] and others):