308

Manuals – Specifications – Links – Pictures

The Sony/Tektronix 308 is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes.

The 308 uses two probes, the standard P6451 8-channel + clock data acquisition probe, and the optional 16-channel P6406 word recognizer probe. Both use 012-0747-00 cable harnesses to attach to the data source.

Key Specifications

	— Inputs —
Data	Eight data channels + 1 clock channel (P6451 probe), impedance 1 MΩ // 5 pF, max. ±40 V nondestructive, logic threshold fixed 1.4 V (TTL) or variable from −12 V to +12 V
Word recognizer	Sixteen TTL inputs (+40/−400 μA max.), max. +15/−1 V
Serial	BNC connector, 1 MΩ // 40 pF, max. ±250 V on BNC; used with P6107 probe, 10 MΩ // 13 pF, max. ±500 V
Qualifier	BNC connector, 10 kΩ, max. +10/−5 V
	— Acquisition —
Clock	50 ns to 200 ms per sample (1-2-5 sequence) or external down to 50 ns
Timing	Data setup time min. 25 ns, hold time min. 0 ns
Memory	2 × 252 eight-bit words (acquisition + reference)
Trigger mode	PRE (trigger at memory location 240) or POST (location 13)
Trigger delay	0-65535 clock periods
Serial data	5, 6, 7 or 8 bits per character, asynchronous (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1900, 2400, 4800 or 9600 bits/s or external up to 9600 bits/s) or synchronous up to 9600 bits/s
	— Display —
CRT	154-0814-00, 6.8 cm × 5.4 cm, P4 phosphor (white)
	— General —
Power	90-132 V or 180-250 V, 48-440 Hz
Weight	3.7 kg (8.16 lb)

Links

• Tek 308 @ radiomuseum.org

Documents Referencing 308

Document	Class	Title	Authors	Year	Links
Tekscope 1980 V12 N1.pdf	Article	New Products		1980	308 • SG505 • 8002A
Tekscope 1980 V12 N2.pdf	Article	Portable Analyzer Speeds Test and Service of Microprocessor-Based System	Ed Averill • John Huber	1980	308

Internals

The 308 is built around an Intel 8085A microprocessor. The display is a magnetically deflected raster-scan CRT. The only Tek-specific IC in the 308 is a 155-0067-02 SMPS controller.

Pictures

• 

  308 display, timing mode (binary counter example)

• 

  308 display, state mode (binary counter example)

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Internals

• 

  Top left

• 

  Top right

• 

  Top right (2)

• 

  Boards unfolding

• 

  Boards unfolding (2)

• 

  Input board

• 

  Trigger board

• 

  back side of input and trigger boards

• 

  Signature/Serial board

• 

  CPU board

• 

  CRT module

• 

  Power supply, top

• 

  Power supply, bottom

• 

  Bottom (CRT board and card cage)

• 

  Bottom CRT board SN303537-UP

Probes

• 

  P6451 probe

• 

  P6451 probe

• 

  P6451 probe internal, PCB front

• 

  P6451 probe internal, PCB back

• 

  P6406 word recognizer probe

• 

  P6406 case close-up

• 

  P6406 PCB front

• 

  P6406 PCB back

• 

  Using P64xx probes with jumper wires

Components

Some Parts Used in the 308

Part	Part Number(s)	Class	Description	Used in
154-0814-00	154-0814-00	CRT	CRT	308
155-0067-02	155-0067-00 • 155-0067-02 • 155-0067-03	Monolithic integrated circuit	SMPS controller	7704A • 7834 • 7844 • 7854 • 7904 • R7903 • 7904 • 7904A • 7934 • R7912 • 7912AD • 7912HB • 7934 • 7104 • R7103 • 308 • 434 • 485 • 690 • P7001
2316E		Monolithic integrated circuit	2K×8 ROM	308
2364		Monolithic integrated circuit	8K×8 ROM	308
Intel 8085A	156-1088-00	Monolithic integrated circuit	8-bit microprocessor	308 • 468 • 4025 • 7A42 • 7D02 • AFG5101 • AFG5102 • PFG5105