Miniature relays

In the 1970s, Tek produced their own miniature relays in-house that were used in some 7000-series plug-ins such as the 7A11, 7A12, 7A13, 7A14, and other equipment. These relays have a tendency to fail and working ones have become very rare. Some of these relays have symmetrical socket layouts so that they can be installed in both possible 180° rotated positions.

Interestingly, Tek appears to have manufactured replacements based on commercial relays in TO-5 metal can cases soldered to small carrier boards with pins matching the Tek sockets.

Possible repair strategies include "micro-surgery" (Ref.1), installing modern miniature gold-contact relays on top of the cut-off base or, if energizing the coil mechanically operates the relay, using a signal source to cycle the relay for a period of time.

Relays of the 148-0034-00 family have contacts with 100mil (2.54 mm) pitch; the housings are 16.0 x 8.3 x 15 mm (width x depths x height).

Tek P/N	Contacts	Coil	Used in	Replacement	Note
108-0599-00	SPST (reed)		7T11: A3K31,A3K32,A3K70,A3K71,A3K80
148-0034-00	DPDT	15 V 600 Ω	7A11: K401, K403, K405, K407, K411, K413, K415, K417, K431 7A13: K47, K48, K480, K490 7A14: K50, K62, K330 7B70/7B71: K6, K44, K48, K138, K780 7503: K521, K525 7904(A) Opt. 2: K802, K805, K812, K815	AXICOM V23079-D2003-B301 (Ref. 2) Omron G6N, G6S
148-0034-01	DPDT	15 V 600 Ω	7A12: K7, K12, K15, K18 485: K879, K1242		Same pinout as 148-0034-00 but longer leads bent outwards.
148-0034-02	DPDT	15 V 600 Ω	7A12: K7 for B020000 up		Same pinout as 148-0034-00 but longer leads bent outwards.
148-0034-03	DPDT	15 V 600 Ω	7A11 B100000+: K401, K403, K405, K407, K411, K413, K415, K417, K431	AXICOM V23079-D2003-B301 (Ref. 2)
148-0035-00	SPDT	15 V 600 Ω	7A13: K60, K61 7A14: K51, K52, K53, K155, K160, K180, K235, K280 7B70, 7B71: K3		Same pinout and coil data as 148-0050-00.
148-0043-00	DPDT	24 V 1325 Ω
148-0043-01	DPDT	24 V 1325 Ω
148-0044-00	DPDT	12 V 425 Ω
148-0050-00	SPDT	15 V 600 Ω	7A13: K10, K30		7A13 manual erroneously calls them 12V DC relays. Print on relay identifies them as polarized, but they are not.
148-0054-00	SPDT+SPST	15 V 600 Ω	7A13: K7, K27
148-0055-00	SPDT+SPST	15 V 600 Ω	7A13: K6, K26
148-0058-00		4 V 130 Ω	7A11 Probe: K55, K59
148-0059-00	DPDT	9.5 V 115 Ω
148-0063-00	DPDT	15 V 600 Ω	7A12: K5		Internally connected. Labled "Alt throw relay" in 7A12 manual.
148-0076-00	SPST (reed)		7L12: K1470
148-0080-00	DPDT	5 V at 65 Ω
148-0087-00	SPDT	90 mW	7L12: K300, K353, K356, K1200
148-0088-00	DPDT	15 V 1 kΩ	7L12: K281, K354, K355, K357, K1130, K1400, K1450 L1 K108, K118, K128, K138 L2 K308, K318, K328, K338		Same pinout as 148-0034-00. 7L12 manual claims "120 mW", but print on relay (and measurement) says 15V 1000 Ω which is 225 mW.
148-0107	DPDT	18 V 880 Ω	TO5 replacement for 148-0088-00		Based on Hi-G MAW-169 7815 / Teledyne 412-6841, found in L1. The last two digits of the Tek part number are missing. Coil labeled 18V dc, 880 Ω
148-0107-03	SPDT		TO5 replacement
148-0107-04	DPDT		TO5 replacement for 148-0054-00 (7A13: K7, K27)
148-0140-00	Actuator		2400 series