Microprocessor support table

This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.

A "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.

"Max" means that it supports the maximum speed fro the processor.

Tektronix 1240/1241

Note:

• All acquisition boards are 1240D2 the 1240D1 cannot be used.
• If the UPIK 40 harness is listed it means that it is supported, but not required.
• (*1) means that P6460 probes are always required.
• (*2) means that P6460 probes are required for CMOS version.
• (*3) means that P6460 or P6462 probes can be used.

Tektronix 1240/1241 ROM pack and configuration table
Micro- Processor	IC package	ROM pack	Probe adapter	Acq. Boards required	Acq. Probes required	Fastest clock supported
Intel
8080		12RM01	X	2	4*3	Max
8031/8051		12RM99 Opt 03	UPIK 40	2	4*1	12 Mhz
8085		12RM02	X	2	4*3	Max
8086	DIP	12RM03	PM201	3	X	8.0 Mhz
8088	DIP	12RM04	PM201	3	X	8.0 Mhz
80186	LCC/PGA	12RM05	PM202	3	X	8.0 Mhz
80188	LCC/PGA	12RM06	PM202	3	X	8.0 Mhz
80286	LCC/PGA	12RM08	PM204	3	X	10.0 Mhz
8096/7		12RM99 Opt 16	N/A	3	6*1	12 Mhz
Motorola
6800		12RM21	X	2	4*3	Max
6801		12RM99 Opt 05	UPIK 40	2	4*3	Max
6802		12RM22	X	2	4*3	Max
6805(E2)		12RM99 Opt 06	UPIK 40	2	2*1	Max
6805(E3)		12RM99 Opt 07	UPIK 40	2	3*1	Max
6808		12RM23	X	2	4*3	Max
6809		12RM24	X	2	4*3	Max
6809E		12RM24	X	2	4*3	Max
68HC11		12RM99 Opt 08	N/A	2	3*1	Max
68000	DIP	12RM25	PM203	3	None	16 Mhz
68000	PGA	12RM25	PM203	3	None	16 Mhz
68008	DIP	12RM26	PM203	3	None	16 Mhz
68010	DIP	12RM27	PM203	3	None	16 Mhz
68010	PGA	12RM27	PM203	3	None	16 Mhz
68020		12RM31	PM205	3	None	25.0 Mhz
68030		12RM33	?	3	None	25.0 Mhz
DSP56000/1		12RM99 Opt 17	NA	3	6*1	50 Mhz
Zilog
Z80		12RM41	X	2	4*1	8 Mhz
Z8001/3		12RM42	NA	3	4*3	10 Mhz
Z8002/4		12RM43	X	3	3*3	10 Mhz
Texas instrument
TMS320320/320C25		12RM99 Opt 11	NA	3	5*1	20 Mhz
TMS32010		12RM99 Opt 14	UPIK 40	2	4*1	Max
Hitachi
6301/3		12RM99 Opt 09	UPIK 40	2	4*3	Max
64180R0/R1		12RM99 Opt 12	NA	3	5*1	Max
Other microprocessors
6502/C02		12RM63	X	2	4*2	Max
1802/4/5/6/(A/C/AC/BC)		12RM99 Opt 22	UPIK 40	2	3*1	Max
ADSP2100		12RM99 Opt 17	NA	3	6*1	Max
F9450		12RM62A	NA	3	3*3	40 Mhz
MIL-Std 1705A		?	?	?	?	40 Mhz
NSC800		12RM71	X	2	4*1	Max
GM EMC		12RM99 Opt 01	UPIK 40	2	4*3	Max
Other
VAXBI		12RM99 Opt 13	012-1164-00	3	6*3	Max
GPIB		12RM99 Opt 04	103-0209-00	2	2*3	Max

Tektronix 1230

• The 1230DPA is required for all DPXXXX probes.
• All acquisition boards are 1230E1.
• All of the needed software is included with the personality module.

Tektronix 1230
Micro- Processor	IC package	Probe adapter	Acq. Boards required	Acq. Probes required	Fastest clock supported
Intel
8031/8051	DIP	DP8031D	2	None	12 Mhz
8085	DIP	PM404	2	None	6 Mhz
8086	DIP	DP8086D	3	None	10 Mhz
8087	DIP	DP8031D DP8086D	?	None	?
8088	DIP	DP8086D	3	None	10 Mhz
80186	PGA	DP186P	3	None	10 Mhz
80188	PGA	DP186P	3	None	10 Mhz
8096/7	PLCC	DP96PL	3	None	12 Mhz
80C196	PLCC	DP96PL	3	None	12 Mhz
80286	PGA	DP286PL	3	None	12.5 Mhz
80287	PGA	DP286PL	3	None	12.5 Mhz
80286	PLCC	DP286P	3	None	12.5 Mhz
80287	PLCC	DP286P	3	None	12.5 Mhz
80386SX	PQFP	DP386SX	3	None	16 Mhz
80387SX	PQFP	DP386SX	3	None	16 Mhz
Motorola
6800	DIP	PM407	2	None	Max
6802	DIP	PM407	2	None	Max
6809	DIP	PM406	2	None	2 Mhz
6809E	DIP	PM406	2	None	2 Mhz
68HC11	All	DPHC11Q	2	None	12 Mhz
68000	DIP	DP68KD	3	None	16 Mhz
68000	PGA	DP68KP	3	None	16 Mhz
68010	DIP	DP68KD	3	None	16 Mhz
68010	PGA	DP68KP	3	None	16 Mhz
Zilog
Z80	DIP	PM402	2	None	Max
Other Microprocessors
6502/C02	DIP	PM403	2	None	Max
Other
STD		PM405	2	None	12.5 Mhz
GPIB		DPGPIB	Any	None	10 Mhz
RS-232		A6740G	Any	None	19.2 K baud

Tektronix 1225/1220

Note that the configuration table for the 1230 is not the same as the one for it's two predecessors. The internal hardware is different enough that the 1225/1220 can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.

Tektronix 1225/1220
Micro- Processor	IC package	Probe adapter	Fastest clock supported
Intel
8085		PM404	Max
8086		PM411
8088		PM411
Motorola
6800		PM407
6802		PM407
6809		PM406	Max
6809E		PM406	Max
68000		PM412
Zilog
Z80		PM402	Max
Other Microprocessor
6502/C02		PM403	Max
Other
STD		PM405	Max

Tektronix 1205

Tektronix 1205
Micro- Processor	IC package	Probe adapter	Acq. Boards required	Acq. Probes required	Fastest clock supported
Zilog
Z80		PM302	X	None	4 Mhz
Other
6502/C02		PM303	X	None	4 Mhz
General		PM301	X	None	4 Mhz

Tektronix 7D02

Note:

• The PM101 is a general purpose probe, it can be defined to work with processors not listed here.
• "FM" stands for Full mnemonic disassembly.
• "STD" stands for Standard radices (Hex, Bin, Octal).

Tektronix 7D02
Micro- Processor	Support Feature	Probe adapter	Requires	Fastest clock supported
Intel
8031	STD	PM101	061-6003-00 Application manual	20 Mhz
8035	STD	PM101	061-5999-00 Application manual	20 Mhz
8039	STD	PM101	061-5999-00 Application manual	20 Mhz
8048	STD	PM101	061-5999-00 Application manual	20 Mhz
8049	STD	PM101	061-5999-00 Application manual	20 Mhz
8051	STD	PM101	061-6003-00 Application manual	20 Mhz
8080	FM	PM101	PM101 Opt 01	20 Mhz
8085	FM	PM104	X	10 Mhz
8086	FM	PM106	X	8 Mhz
8088	FM	PM107	X	5 Mhz
8748	STD	PM101	061-5999-00 Application manual	20 Mhz
8751	STD	PM101	061-6003-00 Application manual	20 Mhz
Motorola
6800	FM	PM102	X	2 Mhz
6801	STD	PM101	061-6000-00 Application manual	20 Mhz
6802	FM	PM103	X	6 Mhz
6803	STD	PM101	061-6000-00 Application manual	20 Mhz
6808	FM	PM103	X	6 Mhz
6809	FM	PM111	X	8 Mhz
6809E	FM	PM111	X	8 Mhz
68000	FM	PM109	X	10 Mhz
Zilog
Z80	FM	PM105	X	6 Mhz
Z8001	FM	PM110	X	6 Mhz
Z8002	FM	PM108	X	4 Mhz
Texas Instrument
TMS9900	STD	PM101	061-6002-00 Application manual	20 Mhz
Other microproscessor
1802	STD	PM101	061-6001-00 Application manual	20 Mhz
6502	FM	PM101	PM101 Opt 02	20 Mhz
Other
MULTIBUS	STD	PM112	X	5 Mhz

Tektronix DAS9100

See 91TMXX tapes for information on tapes. Note:

• All acquisition boards are either 91A24 or 91AE24.
• If the UPIK 40 harness is listed it means that it is supported, but not required.
• (*1) means that P6460 probes are always required.
• (*2) means that P6460 probes are required for CMOS version.
• (*3) means that P6460 or P6462 probes can be used.

DAS 91TMXX tapes
Micro-Processor	IC package	ROM pack	Probe adapter	Acq.Boards required	Acq.Probes required	Fastest clocksupported
Intel
8080		91TM01	X	2	4*3	Max
8031		91TM07	X	2	4*1	Max
8039		91TM10	X	1	3*1	Max
8085		91TM02	X	2	4*3	Max
8086	DIP	91TM03	PM201	2	X	10 Mhz
8088	DIP	91TM04	PM201	2	X	10 Mhz
80186	LCC	91TM05	PM202	2	X	10 Mhz
80188	LCC	91TM06	PM202	2	X	10 Mhz
Motorola
6800		91TM21	X	2	4*3	Max
6801		91TM28	X	2	4*3	Max
6802		91TM22	X	2	4*3	Max
6803		91TM29	X	2	4*3	Max
6805		91TM30	UPIK40	2	4*2	Max
6808		91TM23	X	2	4*3	Max
6809		91TM24	X	2	4*3	Max
68121		91TM32	X	2	4*3	Max
68000	DIP	91TM25	PM203	2	None	12.5 Mhz
68000	PGA	91TM25	PM203	2	None	12.5 Mhz
68008	DIP	91TM26	PM203	2	None	8 Mhz
68010	DIP	91TM27	PM203	2	None	12.5 Mhz
68010	PGA	91TM27	PM203	2	None	12.5 Mhz
Zilog
Z80		91TM41	X	2	4*1	Max
Z8001/3		91TM42	X	3	4*3	Max
Z8002/4		91TM43	X	3	3*3	Max
Other microprocessors
6502/C02		91TM63	X	2	4*2	Max
1802		91TM61	X	2	4*2	Max
1803		91TM65	X	2	4*2	Max
F9450		91TM62	X	2	3*3	Max
MIL-Std 1705A		91TM64	X	2	N/A	N/A
NSC800		91TM71	X	2	4*1	Max
BUS
UNIBUS		91TM51	X	2	4*3	Max
Q-BUS		91TM52	X	2	4*3	Max
QPIB		91TM53	X	1	3*3	Max
ASCII		91TM53	X	1	3*3	Max
EBCDIC		91TM53	X	1	3*3	Max