568: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Oscilloscope Sidebar |manufacturer=Tektronix |designers= |series=560-series scopes|
{{Oscilloscope Sidebar  
model= 568 |
|manufacturer=Tektronix  
summary=Sampling scope |
|series=560-series scopes
image=568_1.JPG |
|model=568
caption=Tektronix 568 front, with [[3S6]] and [[3T6]] plugins |
|summary=Sampling scope
introduced=1967 |
|image=568_1.JPG  
discontinued=1987 |
|caption=Tektronix 568 front, with [[3S6]] and [[3T6]] plugins  
manuals=
|introduced=1967  
|discontinued=1987  
|manuals=
* [[Media:070-0596-00.pdf|Tektronix 568 Manual]] (PDF)
* [[Media:070-0596-00.pdf|Tektronix 568 Manual]] (PDF)
* [http://bama.edebris.com/download/tek/568/568.djvu Tektronix 568 Manual @ BAMA] (DjVu)
* [http://bama.edebris.com/download/tek/568/568.djvu Tektronix 568 Manual @ BAMA] (DjVu)
Line 37: Line 39:


{{BeginSpecs}}
{{BeginSpecs}}
{{SpecGroup | only  realtime}}
{{Spec | Bandwidth           | sampling, DC to  14,5 GHz (with [[3S2]] and [[S-4]] head, may vary with other plug-ins);<br />realtime, DC to 15 MHz (with [[3A5]], may vary with other plug-ins) }}
{{Spec | Bandwidth | DC to  15 MHz (with [[3A5]], may vary with other plug-ins)   }}
{{Spec | Rise time           | sampling, 25 ps;<br />realtime, 24 ns }}
{{Spec | Rise time | 0.024 μs }}
{{Spec | Acceleration voltage | 3.5 kV}}
{{SpecGroup | only  sampling}}
{{Spec | Screen Area         | 8 cm × 10 cm  }}
{{Spec | Bandwidth | DC to 14,5 GHz (with [[3S2]] and [[S-4]] head, may vary with other plug-ins)   }}
{{Spec | Calibrator           | 0.5 V , 5 V (p-p) into 1 MΩ, 50mV, 0.5 V (p-p) into 50 Ω, selectable 1 kHz( -50 % / +100%)and 100 kHz (0.05 %), ( Serial B150629 below  20 kHz instead 100 kHz)}}
{{Spec | Rise time | 25 ps }}
{{Spec | Screen Area         | 8 cm × 10 cm  }}
 
{{Spec | Power               | 100/115/124/200/230/248 V<sub>AC</sub> ±10%, selected via primary voltage selector and voltage range selector switches, 48 Hz to 66 Hz; max 210 W with plug-ins }}
{{SpecGroup | all}}
{{Spec | Thermal Protection   | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }}
{{Spec | Accelerating Potential | 3.5 kV}}
{{Spec | Construction         | Aluminum alloy chassis. Anodized front panel}}
{{Spec | Screen Area | 8 cm × 10 cm  }}
{{Spec | Calibrator | 0.5 V , 5 V (p-p) into 1 MΩ, 50mV, 0.5 V (p-p) into 50 Ω, selectable 1 kHz( -50 % / +100%)and 100 kHz (0.05 %), ( Serial B150629 below  20 kHz instead 100 kHz)}}
{{Spec | Screen Area | 8 cm × 10 cm  }}
 
{{Spec | Power Consumption | max 210 W with plug-ins }}
{{Spec | Line Voltage | 100/115/124/200/230/248 V<sub>AC</sub> ±10%, selected via primary voltage selector and voltage range selector switches, 48 Hz to 66 Hz. }}
{{Spec | Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }}
 
{{Spec | Construction | Aluminum alloy chassis. Anodized front panel}}
{{EndSpecs}}
{{EndSpecs}}


==Links==
==Links==

Revision as of 09:17, 21 January 2022

Tektronix 568
Sampling scope
Tektronix 568 front, with 3S6 and 3T6 plugins

Produced from 1967 to 1987

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 568 is a sampling oscilloscope, introduced in 1967, which takes 3S- and 3T-series plug-ins. Although it was intended to be used for sampling, it can also be used with non-sampling plug-ins of the 3A and 3B series.

Like the 561 and 564, the 568 does not contain vertical or horizontal amplifiers. The plug-ins directly drive the deflection plates. The 568 has multi-pin connectors on its rear panel that are routed to multi-pin connectors on the plug-ins. This is to support external control and measurement using, for example, a 230 and 241. The typical cable for connecting the 568 to the 230 is the 012-0119-01.

Two sampling heads can be interfaced directly to the 568 using the 012-0130-00 cable, or multiple sampling heads can be interfaced using an multiplexer such as the 286, 287, or R288.

CRT was the T5032-2-1 (154-0454-00) or T5611-2-1 (154-0613-01).

The 568 was distributed as a self-contained instrument and also as a component of integrated test and measurement systems such as the S-3100. As a part of the test and measurement systems, the 568 was sold at least until 1986.

A modification, 708P, was available for the 568 to give it a head multiplexer instead of a CRT. Head multiplexer is similar with 286

Key Specifications

Bandwidth sampling, DC to 14,5 GHz (with 3S2 and S-4 head, may vary with other plug-ins);
realtime, DC to 15 MHz (with 3A5, may vary with other plug-ins)
Rise time sampling, 25 ps;
realtime, 24 ns
Acceleration voltage 3.5 kV
Screen Area 8 cm × 10 cm
Calibrator 0.5 V , 5 V (p-p) into 1 MΩ, 50mV, 0.5 V (p-p) into 50 Ω, selectable 1 kHz( -50 % / +100%)and 100 kHz (0.05 %), ( Serial B150629 below 20 kHz instead 100 kHz)
Screen Area 8 cm × 10 cm
Power 100/115/124/200/230/248 VAC ±10%, selected via primary voltage selector and voltage range selector switches, 48 Hz to 66 Hz; max 210 W with plug-ins
Thermal Protection Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Construction Aluminum alloy chassis. Anodized front panel

Links

Pictures

  • 568 front

    568 front

  • 230 and 568 measuring risetime

    230 and 568 measuring risetime

  • 568 rear

    568 rear

  • 568 top inside

    568 top inside

  • 568 bottom inside

    568 bottom inside

  • 568 Mod 708P front

    568 Mod 708P front

  • 568 Mod 708P head multiplexer circuitry

    568 Mod 708P head multiplexer circuitry

  • 568 Mod 708P rear

    568 Mod 708P rear

Retrieved from "https://w140.com/tekwiki/index.php?title=568&oldid=71886"