P6407: Difference between revisions
Jump to navigation
Jump to search
(Created page with "* [http://w140.com/P6407.pdf Tektronix P6407 Manual (PDF)] * [http://w140.com/P6407_11x17.pdf Tektronix P6407 Manual 11x17 Pages (PDF)] * [http://w140.com/P6407_8.5x11x17.pdf ...") |
No edit summary |
||
| (19 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
* [ | {{Probe Sidebar | ||
* [ | |manufacturer=Tektronix | ||
* [ | |model=P6407 | ||
|summary=Word recognizer probe | |||
|image=P6407.jpg | |||
|caption=Tektronix P6407 | |||
|for=2430A 2432A 2440 2445 | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:070-5582-00.pdf|Tektronix P6407 Manual]] (complete) | |||
* [https://w140.com/P6407_11x17.pdf Tektronix P6407 Manual 11x17 Pages Only] | |||
* [https://w140.com/P6407_8.5x11.pdf Tektronix P6407 Manual 8.5x11 Pages Only] | |||
}} | |||
The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09, [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes. | |||
It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel. | |||
The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | |||
{{BeginSpecs}} | |||
{{Spec | Input voltage | −0.5 V to 5.5 V Peak max. }} | |||
{{Spec | Input current | 20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V }} | |||
{{Spec | Speed | Up to 10 MHz without external clock, 20 MHz with external clock}} | |||
{{Spec | Features | 17-bit, TTL Compatible}} | |||
{{EndSpecs}} | |||
==Internals== | |||
The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the [[P6406]]. | |||
Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable. | |||
==Links== | |||
* [http://www.barrytech.com/tektronix/probes/tekp6407.html P6407 @ barrytech.com] | |||
==Pictures== | |||
<gallery> | |||
P6407.jpg | P6407 probe | |||
Tek 2440 5.jpg | Input for P6407 on a [[2440|2440 Opt.03]] | |||
</gallery> | |||
[[Category:Logic analyzer probes]] | |||
[[Category:Introduced in 1987]] | |||
Latest revision as of 10:42, 18 April 2022
The Tektronix P6407 is a 17-bit Word Recognizer Probe for the 2445 Opt. 09, 2465 Opt. 09, 2430A Opt. 03, 2432A Opt. 03 and 2440 Opt. 03 scopes.
It connects to the scope through a 6-pin LEMO S-series connector on the rear panel.
The P6407 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Key Specifications
| Input voltage | −0.5 V to 5.5 V Peak max. |
|---|---|
| Input current | 20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V |
| Speed | Up to 10 MHz without external clock, 20 MHz with external clock |
| Features | 17-bit, TTL Compatible |
Internals
The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the P6406. Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable.
Links
Pictures
-
P6407 probe
-
Input for P6407 on a 2440 Opt.03
