P6407: Difference between revisions

Latest revision as of 10:42, 18 April 2022

Tektronix P6407
Word recognizer probe Tektronix P6407 Compatible with 2430A 2432A 2440 2445 Produced from (?) to (?) Manuals Tektronix P6407 Manual (complete) Tektronix P6407 Manual 11x17 Pages Only Tektronix P6407 Manual 8.5x11 Pages Only

Manuals – Specifications – Links – Pictures

The Tektronix P6407 is a 17-bit Word Recognizer Probe for the 2445 Opt. 09, 2465 Opt. 09, 2430A Opt. 03, 2432A Opt. 03 and 2440 Opt. 03 scopes.

It connects to the scope through a 6-pin LEMO S-series connector on the rear panel.

The P6407 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Key Specifications

Input voltage	−0.5 V to 5.5 V Peak max.
Input current	20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V
Speed	Up to 10 MHz without external clock, 20 MHz with external clock
Features	17-bit, TTL Compatible

Internals

The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the P6406. Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable.

Links

P6407 @ barrytech.com

Pictures

P6407 probe
Input for P6407 on a 2440 Opt.03

@@ Line 1: / Line 1: @@
-[[File:P6407.jpg|thumb|350px|right|P6407]]
+{{Probe Sidebar
-The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes.
+|manufacturer=Tektronix
+|model=P6407
+|summary=Word recognizer probe
+|image=P6407.jpg
+|caption=Tektronix P6407
+|for=2430A 2432A 2440 2445
+|introduced=(?)
+|discontinued=(?)
+|manuals=
+* [[Media:070-5582-00.pdf|Tektronix P6407 Manual]] (complete)
+* [https://w140.com/P6407_11x17.pdf Tektronix P6407 Manual 11x17 Pages Only]
+* [https://w140.com/P6407_8.5x11.pdf Tektronix P6407 Manual 8.5x11 Pages Only]
+}}
+The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes.
-Input lead sets (same as for the [[P6451]], [[P6407]], [[P6460]] and others):
+It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel.
-* [[012-0747-00]] - standard 10-wire 25 cm with pluggable probe tips
-* 012-0655-01 - ten individual 40 cm leads
-* 012-0655-02 - ten individual 8 cm leads
-* 012-0670-00 - ten individual 16 cm leads
-* 012-0800-00 - 10-wire 10 cm
-The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-==Manuals==
+The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-* [http://w140.com/P6407.pdf Tektronix P6407 Manual Complete (PDF)]
-* [http://w140.com/P6407_11x17.pdf Tektronix P6407 Manual 11x17 Pages Only (PDF)]
-* [http://w140.com/P6407_8.5x11.pdf Tektronix P6407 Manual 8.5x11 Pages Only (PDF)]
 {{BeginSpecs}}
-{{Spec | Input voltage | -0.5 V to 5.5 V Peak max. }}
+{{Spec | Input voltage | −0.5 V to 5.5 V Peak max. }}
-{{Spec | Input current | 20 µA max. at 2.7 V, 0.6 mA max. at 0.5 V }}
+{{Spec | Input current | 20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V }}
-{{Spec | Speed         | Up to 10 MHz without External Clock, 20 MHz with External Clock}}
+{{Spec | Speed         | Up to 10 MHz without external clock, 20 MHz with external clock}}
 {{Spec | Features      | 17-bit, TTL Compatible}}
 {{EndSpecs}}
@@ Line 33: / Line 37: @@
 <gallery>
-P6407.jpg
+P6407.jpg | P6407 probe
+Tek 2440 5.jpg | Input for P6407 on a [[2440|2440 Opt.03]]
 </gallery>
 [[Category:Logic analyzer probes]]
+[[Category:Introduced in 1987]]