DAS9100: Difference between revisions

Latest revision as of 07:57, 13 December 2024

Tektronix DAS9100

Logic Analyzer

Produced from 1982 to 1991

Manuals

Alternate

DAS 9100 Manuals @ Bitsavers

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix Digital Analysis 9100 is a logic analyzer system. It can have up to 104 acquisitions channels. Three different versions exist: The DAS9109 basic model, the DAS9129 color CRT model, and the DAS9119 model without screen intended for ATE use and remote control from another DAS9100 system.

It supports plug-in cards 91A04A, 91AE04A, 91A08, 91A32, 91A24, 91AE24, 91S16, 91S32, 91P16, 91P32, 91HS8, and 91HSE8.

The analyzers have an optional DC100 tape drive, used to store pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions.

There is an also a software package, 91DVS, for IBM-compatible PCs.

See the Microprocessor support table for microprocessor disassembly configuration options.

Interfaces

GPIB − The DAS9100 can operate via the GPIB port as either a talker or a listener. It is compatible with controllers such as the Tektronix 4041, 4051, 4052 and 4054.
RS-232C − The RS232 interface has two modes of operation. The first mode is almost the same as the GPIB mode. The controller commands the analyzer to perform functions using the same commands as for GPIB. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100.
Composite output − The video out jack is part of option 02.

Key Specifications

please add

Options

01 Adds a DC100 tape drive
02 GPIB, RS-232 interfaces and hardcopy output
03 adds one extra +5 V power supply module, enables 6/8 slots to be populated with cards.
04 adds two extra +5 V power supply modules, enables 8/8 slots to be populated with cards.
05 Rackmount hardware
06 GPIB, two RS-232 interfaces for master/slave operation and video output

Add-ons

See table for available cards

Standard Accessories

Operator's Manual and Binders
P6452 Data Acquisition Probe
012-1000-00 Diagnostic lead set
214-3154-00 Ejector, Circuit Board
P6454 Clock Probe

ROM images

160-0826-00 (U585)
160-0827-00 (U591)
160-0828-00 (U283)
160-0829-01 (U287)
160-0832-00 (U181)
160-0832-02 (U181)
160-0928-02 (U281)
160-0928-04 (U281)
160-0930-01 (U291)
160-0931-01 (U183)
160-0931-03 (U183)
160-0932-00 (U391)
160-1039-00 (U395)
160-1078-01 (U385)
160-1078-03 (U385)
160-1679-02 (U597)
160-1679-06 (U597)
160-1841-00 (U295)
160-2353-01
160-2354-01

I/O Option 2

160-0830-00 (A19U451) GPIB 1
160-1077-00 (A19U455) GPIB 2
160-1842-00 (A19U440, ≥B020000)

Links

Documents Referencing DAS9100

Document	Class	Title	Authors	Year	Links
Tekscope 1981 V13 N3.pdf	Article	Configurable State-of-the Art Logic Analyzer Gives Choice of Performance	Bill Allen • John Huber	1981	DAS9100 • 91A32 • 91A08 • 91A04 • 91AE04

Pictures

DAS 9129 front
DAS 9129 Opt.06 rear
5V Supply Module (Opt03/04)
5V Supply Module (Opt03/04)

Components

Some Parts Used in the DAS9100

Part	Part Number(s)	Class	Description	Used in
Zilog Z-80	156-0983-03 • 156-0983-04 • 156-0963-02 • 156-2280-00	Monolithic integrated circuit	8-bit microprocessor	318 • 338 • 1503B • 1503C • 5223 • 834 • 835 • 836 • DAS9100 • SPG-271 • TSG-170

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar|
+{{Instrument Sidebar
-title=DAS 9100|
+|manufacturer=Tektronix
-image=DAS9100.jpg|
+|class=Logic Analyzer
-caption=DAS 9100|
+|summary=Logic Analyzer
-introduced=1982|
+|model=DAS9100
-discontinued=1991 |
+|image=DAS9100.jpg
-summary= logic analyzer|
+|caption=DAS 9109
-manuals=
+|introduced=1982
-* [[Media:DAS-9100_operator_manual.pdf|DAS 9100 operator manual.pdf (Onsite)]]
+|discontinued=1991
-* [http://bitsavers.informatik.uni-stuttgart.de/test_equipment/tektronix/logicAnal/9100/ DAS 9100 Manuals (Offsite)]
+|designers=
+|manuals=
+* [[Media:070-3624-01.pdf|DAS 9100 operator manual.pdf]]
+* [[Media:DAS_9100_Series_Operators_Section_7_update.pdf|DAS 9100 Operator's Manual Section 7 update]] (OCR)
+* [[Media:070-3625-01.pdf|Service manual volume 1]]
+* [[Media:070-3836-01.pdf|Service manual volume 2]]
 * [[Media:070-4571-00.pdf|Option 06 I/O service manual addendum]]
+* [[Media:070-4807-00.pdf|+5 Volts power supply (upgraded) module service manual addendum]]
+* [[Media:070-3204-00.pdf|Monochrome monitor service addendum]]
+<small>
+'''Alternate'''
+* [http://bitsavers.informatik.uni-stuttgart.de/test_equipment/tektronix/logicAnal/9100/ DAS 9100 Manuals] @ Bitsavers
+</small>
 }}
+The '''Tektronix Digital Analysis 9100''' is a logic analyzer system. It can have up to 104 acquisitions channels. Three different versions exist: The '''DAS9109''' basic model, the '''DAS9129''' color CRT model, and the '''DAS9119''' model without screen intended for ATE use and remote control from another DAS9100 system.
-The '''Tektronix Digital Analysis 9100''' is a Logic Analyzer system. It can have up to 104 acquisitions channels.
+It supports plug-in cards [[91A04A]], [[91AE04A]], [[91A08]], [[91A32]], [[91A24]], [[91AE24]], [[91S16]], [[91S32]], [[91P16]], [[91P32]], [[91HS8]], and [[91HSE8]].
-The following cards where available for it:
+The analyzers have an optional [https://en.wikipedia.org/wiki/DC100 DC100] tape drive, used to store pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions.
-[[91A04A]], [[91AE04A]] [[91A08]],[[91A32]],[[91A24]], [[91AE24]][[91S16]],[[91S32]], [[91P16]], [[91P32]], [[91HS8]] and [[91HS8E]].
+There is an also a software package, [[91DVS]], for IBM-compatible PCs.
-The analyzers had an optional [[DC100]] tape drive. It was used to store Pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions.
+See the [[Microprocessor support table]] for microprocessor disassembly configuration options.
-There was a also an IBM software package available ([[91DVS]]).
+==Interfaces==
+*GPIB − The DAS9100 can operate via the [[GPIB]] port as either a talker or a listener. It is compatible with controllers such as the Tektronix [[4041]], [[4051]], [[4052]] and [[4054]].
+*RS-232C − The [[RS232]] interface has two modes of operation. The first mode is almost the same as the [[GPIB]] mode. The controller commands the analyzer to perform functions using the same commands as for [[GPIB]]. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100.
+*Composite output − The video out jack is part of option 02.
+{{MissingSpecs}}
+==Options==
+*01 Adds a [[DC100]] tape drive
+*02 [[GPIB]], [[RS-232]] interfaces and hardcopy output
+*03 adds one extra +5 V power supply module, enables 6/8 slots to be populated with cards.
+*04 adds two extra +5 V power supply modules, enables 8/8 slots to be populated with cards.
+*05 Rackmount hardware
+*06 [[GPIB]], two [[RS-232]] interfaces for master/slave operation and video output
-*GPIB
-The DAS9100 can operate via the [[GPIB]] port as either a talker or a listener. It is compatible with controllers such as the Tektronix [[4041]], [[4051]], [[4052]] and [[4054]].
-*RS-232C
-The [[RS232]] interface has two modes of operation. The first mode is almost the same as the [[GPIB]] mode. The controller commands the analyzer to perform functions using the same commands as for [[GPIB]]. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100.
-*Composite output
-The video out jack is part of option 02.
-{{MissingSpecs}}
 ==Add-ons==
 See table for available cards
-[[File:DAS9100 cards.JPG|Table|300px|right]]
+[[File:DAS9100 cards.JPG|Table|300px|left]]
+<br><br><br><br>
+==Standard Accessories==
+* Operator's Manual and Binders
+* [[P6452]] Data Acquisition Probe
+* [[012-1000-00]] Diagnostic lead set
+* [[214-3154-00]] Ejector, Circuit Board
+* [[P6454]] Clock Probe
 ==ROM images==
@@ Line 58: / Line 83: @@
 </div>
+===I/O Option 2===
+* [[Media:160-0830-00.bin|160-0830-00]] (A19U451) GPIB 1
+* [[Media:160-1077-00.bin|160-1077-00]] (A19U455) GPIB 2
+* [[Media:160-1842-00.bin|160-1842-00]] (A19U440, ≥B020000)
 ==Links==
 * [http://www.barrytech.com/tektronix/logic_analyzers/tekdas9100.html DAS9100 @ barrytech.com]
 * [http://www.museum-nt.de/objekte/tektronix_das9100.html DAS9100 @ museum-nt.de]
+{{Documents|Link=DAS9100}}
 ==Pictures==
 <gallery>
-Tek das9100 display.jpg
+Tek das9100 display.jpg | DAS 9129 front
-Tek das9100 rear.jpg
+Tek das9100 rear.jpg | DAS 9129 Opt.06 rear
 Tek das9100 accessories.jpg
 Tek das9100 probes.jpg
@@ Line 74: / Line 104: @@
 unkown(3).jpg
 unkown(4).jpg
+DAS9100_5V_Supply_Plugin1.jpg | 5V Supply Module (Opt03/04)
+DAS9100_5V_Supply_Plugin2.jpg | 5V Supply Module (Opt03/04)
 </gallery>
+==Components==
+{{Parts|DAS9100}}
-[[Category:Logic Analyzers]]
+[[Category:Logic analyzers]]