7A21N: Difference between revisions
Jump to navigation
Jump to search
m (→top: clean up, replaced: title=Tektronix → manufacturer=Tektronix | type=, series=7000-series scopes| → series=7000-series scopes|) |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | ||
manufacturer=Tektronix | type=7A21N | | |manufacturer=Tektronix | ||
summary= | |series=7000-series scopes | ||
image=Tek 7a21n front.jpg | | |type=7A21N | ||
caption=7A21 front panel | | |summary=Direct Access plug-in | ||
introduced=1972 | | |image=Tek 7a21n front.jpg | ||
discontinued=1979 | | |caption=7A21 front panel | ||
|introduced=1972 | |||
manuals= | |discontinued=1979 | ||
* [[Media:070-1367-00.pdf|Tektronix 7A21N Manual]] | |designers= | ||
* [[Media:070-1962-00.pdf|Tektronix 7A21N Manual]] (SN B040000-up | |manuals= | ||
* [[Media:070-1367-00.pdf|Tektronix 7A21N Manual]] | |||
* [[Media:070-1962-00.pdf|Tektronix 7A21N Manual]] (SN B040000-up) | |||
}} | }} | ||
The '''Tektronix 7A21N''' is a 7000-series plug-in that provides direct access to the CRT for fast-risetime AC signals on the 500 MHz-class 7900 series scopes, i.e. [[7904]]/[[7904A]], [[R7903]], [[7934]], [[R7912]]. | |||
The '''Tektronix 7A21N''' is a 7000-series plug-in that provides direct access to the CRT for fast-risetime | |||
AC signals on the | |||
Input signals are applied via a pair of [[GR-874]] connectors. | Input signals are applied via a pair of [[GR-874]] connectors. | ||
The 7A21N is fully passive | The 7A21N is fully passive. It can be wired for single-ended or differential signals internally. | ||
two delay lines, two inverting "transformers" and a passive bridge and power divider. There is no trigger | It includes two delay lines, two inverting "transformers", and a passive bridge and power divider. | ||
pick-off, | There is no trigger pick-off, i.e. the trigger signal will have to be provided externally, e.g. through a [[7M11]]. | ||
The 7A21N is intended to be installed in the Left Vertical bay of the 79xx mainframe and requires the mainframe's | The 7A21N is intended to be installed in the Left Vertical bay of the 79xx mainframe and requires the mainframe's vertical amplifier board to be replaced with the 7A21N CRT Input Network and 7A21N CRT Termination boards, which are shipped plugged into the back side of the 7A21N circuit board. (A second-hand 7A21 without these boards and associated cables is useless!) | ||
vertical amplifier board to be replaced with the 7A21N CRT Input Network and 7A21N CRT Termination boards, which | |||
are shipped plugged into the back side of the 7A21N circuit board. (A second-hand 7A21 without these boards and | |||
associated cables is useless!) | |||
Obviously, installing the replacement boards also disables the mainframe's | Obviously, installing the replacement boards also disables the mainframe's [[7000 series readout system|readout facility]] and second vertical plug-in bay. | ||
[[7000 series readout system|readout facility]] and second vertical plug-in bay. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Deflection | {{Spec | Deflection | < 4 V/Div (SE), < 2 V/Div (Differential) }} | ||
{{Spec | Bandwidth | 20 kHz – 1 GHz }} | {{Spec | Bandwidth | 20 kHz – 1 GHz }} | ||
{{Spec | Input impedance | 50 Ω }} | {{Spec | Input impedance | 50 Ω }} | ||
| Line 37: | Line 33: | ||
==Links== | ==Links== | ||
{{Documents|Link=7A21N}} | |||
{{PatentLinks|7A21N}} | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
Tek 7a21n front.jpg|7A21N front | |||
7a21 right.jpg|7A21N right | |||
Tek 7a21 left.jpg|7A21N left (including vertical amp replacement boards) | |||
Tek_7a21_rear_conn.jpg|7A21N rear | |||
7a21n-accessories-manual.jpg | Standard accessories | |||
</gallery> | </gallery> | ||
Latest revision as of 06:27, 11 September 2024
The Tektronix 7A21N is a 7000-series plug-in that provides direct access to the CRT for fast-risetime AC signals on the 500 MHz-class 7900 series scopes, i.e. 7904/7904A, R7903, 7934, R7912.
Input signals are applied via a pair of GR-874 connectors.
The 7A21N is fully passive. It can be wired for single-ended or differential signals internally. It includes two delay lines, two inverting "transformers", and a passive bridge and power divider. There is no trigger pick-off, i.e. the trigger signal will have to be provided externally, e.g. through a 7M11.
The 7A21N is intended to be installed in the Left Vertical bay of the 79xx mainframe and requires the mainframe's vertical amplifier board to be replaced with the 7A21N CRT Input Network and 7A21N CRT Termination boards, which are shipped plugged into the back side of the 7A21N circuit board. (A second-hand 7A21 without these boards and associated cables is useless!)
Obviously, installing the replacement boards also disables the mainframe's readout facility and second vertical plug-in bay.
Key Specifications
| Deflection | < 4 V/Div (SE), < 2 V/Div (Differential) |
|---|---|
| Bandwidth | 20 kHz – 1 GHz |
| Input impedance | 50 Ω |
| Max. input | 6 W avg @ 50 Ω, 200 V DC |
Links
Documents Referencing 7A21N
| Document | Class | Title | Authors | Year | Links |
|---|---|---|---|---|---|
| 7000 series brochure March 1973.pdf | Brochure | 7000 series brochure, March 1973 | 1973 | 7A11 • 7A12 • 7A13 • 7A14 • 7A15A • 7A16A • 7A17 • 7A18 • 7A19 • 7A21N • 7A22 • 7B50 • 7B53A • 7B70 • 7B71 • 7B92 • 7CT1N • 7D11 • 7D13 • 7D14 • 7D15 • 7M11 • 7L12 • 7S11 • 7S12 • 7T11 • 7704A • R7704 • 7904 • R7903 • 7603 • R7603 • 7403N • R7403N • 7313 • R7313 • 7613 • R7613 • 7623 • R7623 • P7001 |
Pictures
-
7A21N front
-
7A21N right
-
7A21N left (including vertical amp replacement boards)
-
7A21N rear
-
Standard accessories
Precursor/prototype to the 7A21N:
