32,192
edits
m (typo fixed) |
No edit summary |
||
Line 47: | Line 47: | ||
There are several DC specs which differ with part suffix. | There are several DC specs which differ with part suffix. | ||
Suffixes -10, -11, -12 and -13 were used for the redesigned M84, known as the M705. | Suffixes -10, -11, -12 and -13 were used for the redesigned M84, known as the [[M705]]. | ||
The M705 was necessary because the original SH2 (2-2.5GHz?) process was being discontinued. | The M705 was necessary because the original [[SH2]] (2-2.5GHz?) process was being discontinued. | ||
The M705 was designed by Hal Lilliwhite using the faster SH3 process (6-7GHz). | The M705 was designed by [[Hal Lilliwhite]] using the faster [[SH3]] process (6-7GHz). | ||
Additionally, the M705 apparently had the gain setting resistor laser trimmed at the wafer level. | Additionally, the M705 apparently had the gain setting resistor laser trimmed at the wafer level. | ||
The M705 was designed in late 1989 and tested in early 1990. | The M705 was designed in late 1989 and tested in early 1990. |