7A29P: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(added specs from 1988 catalog)
mNo edit summary
Line 18: Line 18:
{{Spec | Bandwidth          | 750 MHz (in [[7912HB]]) }}
{{Spec | Bandwidth          | 750 MHz (in [[7912HB]]) }}
{{Spec | Input impedance    | 50 Ω}}
{{Spec | Input impedance    | 50 Ω}}
{{Spec | Max. input        | max. 5 V<sub>RMS</sub> or 25V peak; max. 100 V additional DC component in AC mode }}
{{Spec | Max. input        | max. 5 V<sub>RMS</sub> or 25 V peak; max. 100 V additional DC component in AC mode }}
{{Spec | Deflection        | 10 mV/div to 1 V/div, 1-2-5, ±2%; variable 2.5:1, reduced bandwidth }}
{{Spec | Deflection        | 10 mV/div to 1 V/div, 1-2-5, ±2%; variable 2.5:1, reduced bandwidth }}
{{Spec | Channels          | Single channel }}
{{Spec | Channels          | Single channel }}

Revision as of 02:39, 16 August 2023

Tektronix 7A29P
1 GHz programmable amplifier
7A29 front view (sans options)

Compatible with 7000-series scopes

Produced from 1988 to 1991

Manuals
  • please add
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7A29P is a programmable 1 GHz single-channel vertical plug-in for 7000-series scopes. It is primarily intended for the 7912HB and the 7854 when paired with the 021-0374-00.

Key Specifications

Bandwidth 750 MHz (in 7912HB)
Input impedance 50 Ω
Max. input max. 5 VRMS or 25 V peak; max. 100 V additional DC component in AC mode
Deflection 10 mV/div to 1 V/div, 1-2-5, ±2%; variable 2.5:1, reduced bandwidth
Channels Single channel

Internals

The 7A29P employs a number of Tek-made custom Hypcon-packaged hybrids initially designed for the 7A29 and the 7104, the 155-0180-00 fast input protection, 155-0181-00 input amplifier and 155-0175-00 trigger amplifier (2 ×). It also uses the 155-0076-00 input protection chip initially developed for the 485.

It uses a "feed-beside" scheme implemented with standard low-frequency operational amplifiers to compensate for low-frequency anomalies in the frequency response that are attributed to transistor heating.

The input connector is a special Tek-made part that is exactly 50 Ω. Typical BNC connectors are around 52 Ω.

Links

Pictures

Internal

Custom ICs used in the 7A29P

Page Model Part nos Description Designers Used in
155-0076-00 M94 155-0076-00 input protection and probe logic John Addis Wink Gross 465 485 7A29 7A29P 11A52 11A71 11A72 SCD1000
155-0164-00 H526(?) 155-0164-00 time slot switch 7A16P 7B90P 7A29P
155-0175-00 H476 155-0175-00 155-0175-05 broadband amplifier John Addis Wink Gross Carl Battjes 7904A 7912HB 7934 7104 R7103 7A29 7A29P 7F10 067-0587-02 067-0587-10 11A71 SCD1000 EG&G N-AM-173A
155-0180-00 H489 155-0180-00 fast input protection John Addis Wink Gross 7A29 7A29P 7F10 11A71
155-0181-00 H500 155-0181-00 input amplifier John Addis Wink Gross 7A29 7A29P 7F10 11A71