P6407
The Tektronix P6407 is a 17-bit Word Recognizer Probe for the 2445 Opt. 09, 2465 Opt. 09, 2430A Opt. 03, 2432A Opt. 03 and 2440 Opt. 03 scopes. It connects to the scope through a 6-pin LEMO S-series connector on the rear panel.
The P6407 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Manuals
- Tektronix P6407 Manual Complete (PDF)
- Tektronix P6407 Manual 11x17 Pages Only (PDF)
- Tektronix P6407 Manual 8.5x11 Pages Only (PDF)
Key Specifications
| Input voltage | -0.5 V to 5.5 V Peak max. |
|---|---|
| Input current | 20 µA max. at 2.7 V, 0.6 mA max. at 0.5 V |
| Speed | Up to 10 MHz without External Clock, 20 MHz with External Clock |
| Features | 17-bit, TTL Compatible |
Internals
The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the P6406. Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable.
Links
Pictures
-
P6407 probe
-
Input for P6407 on a 2440 Opt.03
