Cargo query
Showing below up to 250 results in range #1 to #250.
Page | Parameter | Value |
---|---|---|
011-0045-00 | Impedance | 50 Ohm |
011-0045-00 | Power | 1.5 W Average |
011-0129-00 | Bandwidth | DC − 100 kHz |
011-0129-00 | Impedance | 50 Ω ±0.05% |
011-0129-00 | Power | 2 W Average |
011-0129-00 | Voltage | 11 VRMS max. |
012-0482-00 | Cable | 50 Ω ±1 Ω RG223, Double shielded silver plated copper shield, Silver plated copper center conductor P/N: 175-1455-00 |
012-0482-00 | Connector | Male BNC, 50 Ω, 500 V, RG55/58/223, Crimp style P/N: 131-0125-00 |
012-0482-00 | Length | 36" / 914.4mm |
013-0182-00 | CMRR | > 25 dB |
013-0182-00 | Frequency range | 50 kHz to 3 MHz - usable from 10 kHz to 20 MHz |
013-0182-00 | Gain Flatness | 0.25 dB |
013-0182-00 | Output Termination |
|
015-0108-00 | Angular accuracy | Degree markers, 1° |
015-0108-00 | Max. RPM | 20,000 rpm |
015-0108-00 | Shaft load | max. 10 lb |
015-0108-00 | Temperature range | −15 °C to +75 °C |
035-5031-00 | Attenuation | ×2 (delayed output) |
035-5031-00 | Delay | 75±1 ns |
035-5031-00 | Impedance | 50 Ω |
035-5031-00 | Rise time | 175 ps |
035-5031-00 | Trigger output | attenuated ×5, 600 ps rise time |
067-0502-00 | 100x Amplifier gain accuracy | ±1% |
067-0502-00 | 100x Amplifier output range | ≥ ±20 V, ±5 mA |
067-0502-00 | 100x Amplifier Output resistance | approx. 250 Ω |
067-0502-00 | 100x Amplifier risetime | < 35 μs |
067-0502-00 | Amplitude accuracy | Within 0.25% into 1 MΩ load |
067-0502-00 | Amplitude range | 0.2 mV to 100 V in 1−2−5 sequence, 5 mA in current loop |
067-0502-00 | Maximum input voltage | 100 V |
067-0502-00 | Output | DC+, DC-, Squarewave |
067-0502-00 | Squarewave repetition rate | 1 kHz within 20% |
067-0502-01 | Amplitude accuracy | Within 0.25% into 1 MΩ load |
067-0502-01 | Amplitude range | 0.2 mV to 100 V in 1-2-5 sequence, 5mA in current loop |
067-0502-01 | Maximum input voltage | 100 V |
067-0502-01 | Output | DC+, DC-, Squarewave |
067-0502-01 | Squarewave repetition rate | 1 kHz within 20% |
067-0532-01 | Amplitude accuracy | 3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5% |
067-0532-01 | Amplitude range | 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 Vp-p increments; variable between calibrated steps; max. output 4.2 Vp-p |
067-0532-01 | Frequency accuracy | ±2% of indicated frequency; 3 MHz output ±5% |
067-0532-01 | Frequency range | 65 MHz to 500 MHz |
067-0532-01 | Output | 50 Ω ±1%, via GR-874 connector |
067-0587-00 | Bandwidth | 250 MHz |
067-0587-00 | Rise time | ? |
067-0587-01 | Amplitude | >8 Div |
067-0587-01 | Flatness | leveled from 3 MHz to 500 MHz |
067-0587-01 | Input impedance | 50 Ω |
067-0587-01 | Input range | 0.5 to 1 Vp-p |
067-0587-01 | Pretrig Out | unspecified |
067-0587-01 | Repetition rate | 10 Hz to 1 MHz in decade steps, within 20 % of rate selected |
067-0587-01 | Rise time | < 300 ps |
067-0587-01 | Staircase accuracy | ± 0.3% with no error in mainframe ±50 V supply |
067-0587-02 | Amplitude | 2 to 10 Div |
067-0587-02 | Flatness | ± 3% from 3 MHz to 1 GHz |
067-0587-02 | Input impedance | 50 Ω |
067-0587-02 | Input range | 0.5 to 1 Vp-p |
067-0587-02 | Position | Top at least ±5 Div from center of screen |
067-0587-02 | Pretrig Out | 0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable) |
067-0587-02 | Repetition rate | 10 Hz to 1 MHz in decade steps, 0.1 % |
067-0587-02 | Rise time | < 150 ps |
067-0587-02 | Staircase accuracy | ± 0.3% in ± 3 Div, ± 0.5% in ± 4 Div, Linearity ± 0.2% of 10 Div |
067-0587-10 | Amplitude | 2 to 10 Div |
067-0587-10 | Flatness | ± 3% from 3 MHz to 1 GHz |
067-0587-10 | Input impedance | 50 Ω |
067-0587-10 | Input range | 0.5 to 1 Vp-p |
067-0587-10 | Position | Top at least ±5 Div from center of screen |
067-0587-10 | Pretrig Out | 0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable) |
067-0587-10 | Repetition rate | 10 Hz to 1 MHz in decade steps, 0.1% |
067-0587-10 | Rise time | < 150 ps |
067-0587-10 | Staircase accuracy | ±0.3% in ±3 Div, ±0.5% in ±4 Div, Linearity ±0.2% of 10 Div |
067-0625-00 | Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs |
067-0625-00 | Sensitivity | 10 ±1 mV/% input change at 1.2 Vp-p |
067-0625-00 | Temperature Range | 23°C ±10°C |
067-0650-00 | Amplitude | 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 V increments; |
067-0650-00 | Amplitude accuracy | 9 MHz: Within 2% of indicated amplitude; Constant amplitude 220 MHz to 900 MHz: Within 5% of 9 MHz amplitude |
067-0650-00 | Frequency range | 220 MHz to 900 MHz, or 9 MHz |
067-0650-00 | Frequency accuracy | Within 2% of indicated frequency; 9 MHz within 5% |
067-0650-00 | Output impedance | 50 Ω ±1% |
067-0650-00 | Temperature | 0 °C to 50 °C |
067-0938-00 | Notch depth | ≥100 dB at 10 Hz and 20 Hz, ≥60 dB otherwise |
067-0938-00 | Notch frequency | 10 Hz, 20 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz, 100 kHz; ±2% |
067-1232-00 | Attenuation | Input to REF port, 7.8±0.5 dB; REF to 75 Ω port, 3.5±0.2 dB |
067-1232-00 | Frequency range | DC to 1 GHz |
067-1338-00 | Output | positive-going step of ~250 mV |
067-1338-00 | Rise time | max. 19.5 ps, actual value specified on a per-unit basis |
067-1429-00 | Bandwidth | >10MHz |
067-1429-00 | Gain | ×10 ±2% ( ×1 using passive ×10 probe) |
067-1429-00 | Input impedance | 1 MΩ //20 pF |
067-1429-00 | Output impedance | 75 Ω |
107 | Output | rectangular waveform, 100−500 mVp-p (variable) into 50 Ω |
107 | Power | 100 W |
107 | Repetition rate | 400 kHz to 1 MHz (variable, uncalibrated) |
107 | Rise time | less than 3 ns (fixed) when terminated into 50 Ω |
107 | Weight | 5.9 kg (13 pounds) |
109 | Pulse amplitude | Internal supply: 0 to 50 V variable in three ranges (0.5 V, 5 V, 50 V), positive or negative, or external up to ±300 V |
109 | Pulse frequency | 550 to 720 Hz |
109 | Pulse length | 0.5 ns to 100 ns with a single charge line between the two charge line connectors, or up to 300 ns at half pulse rate with one open-ended charge line (other connector grounded) |
109 | Rise time | 250 ps |
10A1 | Bandwidth | DC to 45 MHz (35 MHz in maximum sensitivity) |
10A1 | CMRR | 20,000:1 below 100 kHz |
10A1 | Comparison voltage | −6 V to +6 V ±(0.1% + 5 mV) 0 °C to 40 °C |
10A1 | Deflection | 1 mV/div to 20 V/div, 1−2−5 |
10A1 | Input impedance | 1 MΩ // 20 pF |
1103 | Offset control | +1 to −1 V, course and fine control, 0 V when disabled |
1103 | Power input | 87 to 128 VAC (low) or 174 to 250 VAC (high), 48 to 440 Hz, ≤35 W |
1103 | Power output | +15 V, −15 V, +5 V, −5 V ; ±2% each ; ≤300 mA each |
1104 | Battery | sealed lead-acid gel type |
1104 | Charging time | 16 h (longer when scope is operating) |
1104 | DC output | 12 V, 8 A |
1104 | Power | 95–128 or 185–250 VAC |
1104 | Weight | 6.5 kg (14 lb) |
111 | Output amplitude | ≥10 V (selectable polarity) into 50 Ω |
111 | Pre-trigger | 30−250 ns variable with additional calibrated "+1 ns" switch, jitter ≤100 ps |
111 | Pulse repetition rate | 10 Hz to 100 kHz, or by external trigger |
111 | Rise time | <500 ps |
112 | Amplification | 0.5 to 5000 V/V |
112 | Bandwidth | DC to 2 MHz @ gain < 166; DC to 1 MHz above |
112 | Input impedance | 1 MΩ // 47 pF |
112 | Output impedance | 8 kΩ |
11301 | Bandwidth | 400 MHz |
11301 | Sweep | 5 ns/Div to 500 ms/Div, 1−2−5, 10 magnifier |
11301 | Trigger modes | DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field) |
11301 | Triggering | 0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth |
11301 | X-Y operation | X from center plugin, bandwidth 3 MHz |
11302 | Bandwidth | 500 MHz |
11302 | Features |
|
11302 | Power consumption | 240 W max |
11302 | Sweep | 5 ns/Div to 500 ms/Div, 1-2-5, ×10 magnifier |
11302 | Trigger modes | DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field) |
11302 | Triggering | 0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth |
11302 | Weight | 44 pounds (20 kg) |
11302 | X-Y operation | X from center plugin, bandwidth 3 MHz |
11402 | Bandwidth | 1 GHz |
11402 | CRT | 9" monochrome, touch screen |
11402 | Features |
|
11402 | Recording length | 512 to 10240 points |
11402 | Sampling rate | up to 20 MS/s |
11402 | Trigger bandwidth | 1 GHz |
11402 | Vertical resolution | 10 bits (14 bits with averaging) |
11403 | Bandwidth | 1 GHz |
11403 | CRT | 8½" color, touch screen |
11403 | Features |
|
11403 | Recording length | 512 to 10240 points |
11403 | Sampling rate | up to 20 MS/s |
11403 | Trigger bandwidth | 1 GHz |
11403 | Vertical resolution | 10 bits (14 bits with averaging) |
115 | Aberrations | < 3% |
115 | Amplitude | ±100 mV to ±10 V into 50 Ω |
115 | DC offset | ±5 V |
115 | Delay | 50 ns to 500 μs |
115 | Period | 100 ns to 10 ms |
115 | Rise / Fall time | 10 ns to 100 μs |
115 | Width | 50 ns to 500 μs |
11801 | CRT |
|
11801 | Input Sensitivity | 2 to 255 mV/div in 1 mV/div steps |
11801 | Jitter | 1.1 ps RMS + 4 ppm of position (typical) |
11801 | Maximum Trigger Input | 1 Vp-p (1x), 10 Vp-p (10x), 2.5 Vp-p prescaler |
11801 | Record Duration | 10 ps to 50 ms |
11801 | Record Length | 512, 1024, 2048, 4096, 5120 samples |
11801 | Sample Rate | up to 200 kHz |
11801 | Trigger Sensitivity | 50 mV, DC − 4 GHz, AC coupled trigger prescaler to 10 GHz |
11801 | Vertical Resolution | 8 bits − 25 points/div |
11802 | Deflection | 2 to 255 mV/div in 1 mV/div increments; 4 to 510 mV/div in 2 mV/div increments |
11802 | Record length | 512, 1024, 2048, 4096, 5120 samples |
11802 | Resolution | 8 bits full sreen |
11802 | Sample rate | up to 200 kHz |
11802 | Time base | 1 ps/div to 5 mV/div |
11A16 | Bandwidth | 15 MHz |
11A16 | Bandwidth | 50 MHz |
11A16 | Deflection | 1 mA/Div to 2 A/Div, 1–2–5 |
11A16 | Deflection | 5 mA/Div to 10 A/Div, 1–2–5 |
11A16 | Noise | 0.3 Div @ 1 mA/Div, 0.2 Div @ 2 mA/Div, 0.1 Div @ 5 mA/Div, 0.05 Div above |
11A16 | Noise | 0.3 Div @ 5 mA/Div, 0.2 Div @ 10 mA/Div, 0.1 Div @ 25 mA/Div, 0.05 Div above |
11A32 | Bandwidth | DC to 400 MHz; selectable 100 MHz / 20 MHz 4-pole BWL (Bandwidth Limit) filter |
11A32 | Deflection | 1 mV to 10 V per division in 1% calibrated steps |
11A32 | Features |
|
11A32 | Input impedance | 50 Ω or 1 MΩ |
11A32 | Rise time | 875 ps in 1 GHz mainframes such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A |
11A33 | Bandwidth | DC to 150 MHz |
11A33 | Deflection | 1 mV/Div to 10 V/Div calibrated in 1% increments |
11A33 | Differential DC Offset range | ±1 V at 1 mV/Div |
11A33 | Features |
|
11A33 | Input impedance | 50 Ω, 1 MΩ, 1 GΩ selectable |
11A34 | Bandwidth | DC to 300 MHz. 100 MHz and 20 MHz four pole BWL (Bandwidth Limit) filters may be selected. |
11A34 | Deflection | 1 mV to 10 V/div in 1% calibrated steps |
11A34 | Features |
|
11A34 | Input impedance | 50 Ω or 1 MΩ |
11A34 | Rise time | 1.2 ns in 1 GHz mainframe such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A |
11A52 | Bandwidth | DC to 600 MHz plus 100 MHz and 20 MHz Bandwidth Limit Filters |
11A52 | Deflection | 1 mV to 10 V per division in 1% calibrated steps |
11A52 | Features |
|
11A52 | Input impedance | 50 Ω |
11A52 | Rise time | 580 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A |
11A71 | Bandwidth | DC to 1 GHz |
11A71 | Deflection | 1 mV/Div to 1 V/Div in 1−2−5 sequence |
11A71 | Features |
|
11A71 | Input impedance | 50 Ω via a Tekprobe BNC connector on the front on the plug-in |
11A71 | Number of Inputs | 1 |
11A71 | Rise time | 350 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A |
11A72 | Bandwidth | 1 GHz |
11A72 | Input impedance | 50 Ω via a Tekprobe BNC connector on the front on the plug-in |
11A81 | Bandwidth | |
11A81 | Deflection | 10 mV/div to 1 V/div |
11A81 | Input impedance | 50 Ω |
11A81 | Rise time | < 130 ps |
1220 | CRT | 13 x 10 cm |
1220 | Features |
|
1220 | Number of channels | 32 channels |
1220 | Power | 90-250 V |
1220 | Probes | |
1220 | Weight | 8.2 kg (18 lb.) |
1225 | CRT | 13 cm × 10 cm |
1225 | Features |
|
1225 | Number of channels | 48 channels |
1225 | Power | 90-250 V |
1225 | Probes | |
1225 | Weight | 8.6 kg (19 lb.) |
123 | Bandwidth | 3 Hz to 25 kHz |
123 | Input impedance | 10 MΩ |
123 | Max. input | 0.1 Vp-p |
123 | Noise | ≤7.5 μVRMS, input-referred |
123 | Output impedance | 31 kΩ |
123 | Power | One 1.345 V mercury battery (RM3R) and one miniature 30 V battery (413); 100 hours runtime |
123 | Voltage gain | ×100 (40 dB) |
1230 | CRT | 13 x 10 cm |
1230 | Features |
|
1230 | Inputs | 16 to 64 channels |
1230 | Power | 90-250 V |
1230 | Probes | |
1230 | Weight | 8.6 kg / 19 lb (1230B: 12.2 kg / 29 lb) |
130 | Accuracy | 3% FS, 1% FS with "careful" calibration using S-30 Delta Standard |
130 | DUT connection | UHF connector (DUT) + 4 mm jack (guard) |
130 | Guard output | 250 Ω source impedance, can drive 200 pF |
130 | Measurement voltage | <1 V for capacitors, <0.25 V for inductors, 120-140 kHz |
130 | Ranges | 3, 10, 30, 100 or 300 pF / 3, 10, 30, 100 or 300 μH full scale |
131 | Delay time | 32 ns typ. |
131 | Lower frequency limit | 50 Hz |
131 | Noise | 0.1 mAp-p |
131 | Risetime | 20 ns (eq. 17 MHz −3 dB bandwidth) |
131 | Sensitivity | 1 mA/Div to 1 A/Div, 1−2−5 (scope input fixed at 50 mV/Div) |
134 | Bandwidth | 10 Hz to 30 MHz in P6019/P6021 x120 mode |
134 | Bandwidth | 8 Hz to 54 MHz in P6020/P6022 x50 mode |
134 | Current Ranges | 1 mA/Div to 1 A/Div, 1−2−5 (scope at 50 mV/Div) |
134 | Voltage Gain | 125 in P6019/P6021 switch position |
134 | Voltage Gain | 50 in P6020/P6022 switch position |
1360 | Frequency | 300 MHz (−3dB, one switch) |
1360 | Impedance | 50 Ω |
148-0034-00 | Coil resistance | 600 Ω |
148-0034-00 | Coil voltage | 15 V DC |
148-0034-01 | Coil resistance | 600 Ω |
148-0034-01 | Coil voltage | 15 V DC |
{{#cargo_query: limit=250 |offset=0 |tables=Specifications |fields=_pageName=Page,Parameter=Parameter,Value=Value |max display chars=300 }}