2465: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 42: Line 42:


{{BeginSpecs}}
{{BeginSpecs}}
{{SpecGroup|2445}}
{{Spec | Bandwidth | 350 MHz (2445: 150 MHz) }}
{{Spec | Bandwidth | 150 MHz }}
{{Spec | Sweep | 5 ns/Div to 500 ms/Div, 1−2−5, and ×10 magnifier (fastest sweep 500 ps/Div) }}
{{SpecGroup|2465}}
{{Spec | Bandwidth | 350 MHz }}
{{SpecGroup|Common}}
{{Spec | Sweep Rate | 500 ps/div }}
{{Spec | Channels | Four independent channels }}
{{Spec | Channels | Four independent channels }}
{{Spec | Vertical | 2 mV/div vertical sensitivity }}
{{Spec | Deflection | 2 mV/div to 5 V/Div, 1−2−5 }}
{{Spec | Cursors | Delta Volts and Delta Time Cursors }}
{{Spec | Cursors | Delta Volts and Delta Time Cursors }}
{{Spec | CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Trigger Bandwidth | 500 MHz min. }}
{{Spec | Trigger Bandwidth | 500 MHz min. }}
{{Spec | Input Impedance| 50 Ω / 1 MΩ inputs with 50 Ω protection }}
{{Spec | Input Impedance| 50 Ω / 1 MΩ inputs with 50 Ω protection }}
{{Spec | CRT | [[154-0850-01]] }}
{{Spec | CRT | [[154-0850-01]], +14/−1.9 kV }}
{{Spec | Probes | Two [[P6131]] ×10 probes, 1.3 m  }}
{{Spec | Probes | Two [[P6131]] ×10 probes, 1.3 m  }}
{{EndSpecs}}
{{EndSpecs}}

Revision as of 23:14, 28 February 2022

Tektronix 2465
Portable 150/300 MHz 4-ch scope
Tektronix 2465

Produced from 1984 to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 2465 is a four-channel 300 MHz portable oscilloscope from the penultimate generation of analog Tektronix scopes. The 2445 is a 150 MHz version.

Wink Gross was the vertical system engineer for the 2465. He designed the 2465 main vertical amplifier, the channel switch, and the auxiliary input preamp. Marv LaVoie designed the 2465 attenuator. The horizontal amplifier in the 2465 was designed by Art Metz and Ken Schlotzhauer (trigger IC). Art Metz also worked on the triggers. He and Walt Ainsworth designed the sweeps. Mike Metcalf designed the 2465 Z axis IC, both under the direction of Art Metz. Art had horizontal system responsibility and designed the non-IC part of the horizontal as well.

Options

  • Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
  • Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
  • Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
  • Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
  • Option 10 added a GPIB interface for remote control.

Key Specifications

Bandwidth 350 MHz (2445: 150 MHz)
Sweep 5 ns/Div to 500 ms/Div, 1−2−5, and ×10 magnifier (fastest sweep 500 ps/Div)
Channels Four independent channels
Deflection 2 mV/div to 5 V/Div, 1−2−5
Cursors Delta Volts and Delta Time Cursors
CRT Readout Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger Advanced Triggering with "Hands Off" Auto Level Triggering
Trigger Bandwidth 500 MHz min.
Input Impedance 50 Ω / 1 MΩ inputs with 50 Ω protection
CRT 154-0850-01, +14/−1.9 kV
Probes Two P6131 ×10 probes, 1.3 m

See also

Links

Pictures

2445

2465


CRTs used in the 2445

Page Part nos Description Designers Used in
154-0850-01 154-0850-00 154-0850-01 CRT 2424L 2430 2430A 2431L 2432 2439 2440 2445 2465 2465A 2465B


CRTs used in the 2465

Page Part nos Description Designers Used in
154-0850-01 154-0850-00 154-0850-01 CRT 2424L 2430 2430A 2431L 2432 2439 2440 2445 2465 2465A 2465B


Custom ICs used in the 2445

Page Model Part nos Description Designers Used in
155-0235-00 155-0235-00 155-0235-00 preamplifier 2445 2465 2400-series scopes
155-0236-00 155-0236-00 155-0236-00 channel switch 2445 2465 2467 7A42
155-0237-00 155-0237-xx 155-0237-00 155-0237-02 vertical output amplifier 2445 2465 2466 2467
155-0238-00 155-0238-00 155-0238-00 preamplifier 11302A 2424L 2430 2430A 2432 2445 2465 2466 2467
155-0239-00 155-0239-00 155-0239-00 155-0239-01 155-0239-02 trigger Ken Schlotzhauer 2424L 2430 2430A 2432 2445 2465 2467 2400-series scopes 11201 11401 11402
155-0240-00 155-0240-00 155-0240-00 sweep 2400-series scopes 2445 2465 24672467B 11302A SCD1000
155-0241-02 155-0241-02 155-0241-01 155-0241-02 horizontal output stage 2445 2465 2466 2467 11302A
155-0242-00 155-0242-xx 155-0242-00 155-0242-01 Z-axis amplifier and autofocus Mike Metcalf 2215 2252 2440 2445 2445B 2465 2465B 2467 2467B
155-0244-00 155-0244-00 155-0244-00 display sequencer Don Larson 2445 2465 2466 2467 2467B
165-2235-03 165-2235-03 165-2235-03 preamplifier 2215 2252 2445 2465 2467

Custom ICs used in the 2465

Page Model Part nos Description Designers Used in
155-0235-00 155-0235-00 155-0235-00 preamplifier 2445 2465 2400-series scopes
155-0236-00 155-0236-00 155-0236-00 channel switch 2445 2465 2467 7A42
155-0237-00 155-0237-xx 155-0237-00 155-0237-02 vertical output amplifier 2445 2465 2466 2467
155-0238-00 155-0238-00 155-0238-00 preamplifier 11302A 2424L 2430 2430A 2432 2445 2465 2466 2467
155-0239-00 155-0239-00 155-0239-00 155-0239-01 155-0239-02 trigger Ken Schlotzhauer 2424L 2430 2430A 2432 2445 2465 2467 2400-series scopes 11201 11401 11402
155-0240-00 155-0240-00 155-0240-00 sweep 2400-series scopes 2445 2465 24672467B 11302A SCD1000
155-0241-02 155-0241-02 155-0241-01 155-0241-02 horizontal output stage 2445 2465 2466 2467 11302A
155-0242-00 155-0242-xx 155-0242-00 155-0242-01 Z-axis amplifier and autofocus Mike Metcalf 2215 2252 2440 2445 2445B 2465 2465B 2467 2467B
155-0244-00 155-0244-00 155-0244-00 display sequencer Don Larson 2445 2465 2466 2467 2467B
165-2235-03 165-2235-03 165-2235-03 preamplifier 2215 2252 2445 2465 2467