R: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | | {{Plugin Sidebar | ||
manufacturer=Tektronix | type=Type R| | |manufacturer=Tektronix | ||
summary=Tranistor rise-time test set | |series=500-series scopes | ||
|type=Type R | |||
image=Tek_Type_R_Front–Tight.jpg | | |summary=Tranistor rise-time test set | ||
caption=Type R | | |image=Tek_Type_R_Front–Tight.jpg | ||
introduced=1958 | | |caption=Type R | ||
discontinued=1967 | |introduced=1958 | ||
|discontinued=1967 | |||
manuals= | |manuals= | ||
* [[Media:070-286.pdf|Tektronix Type R Manual]] ( | * [[Media:070-286.pdf|Tektronix Type R Manual]] (high quality scan, split schematics, OCR) | ||
* [[Media:070-286 whole schematics medium quality.pdf|Tektronix Type R Manual]] (medium quality scan, whole schematics, OCR) | |||
* [http://bama.edebris.com/manuals/tek/r/ Tektronix Type R Manual @ BAMA] | * [http://bama.edebris.com/manuals/tek/r/ Tektronix Type R Manual @ BAMA] | ||
* [[Media:tek_type_r_fcp.pdf|Tektronix Type R Factory Calibration Procedure]] (OCR) | |||
* [[Media:tek_type_r_fcp.pdf|Tektronix Type R Factory Calibration Procedure ( | |||
}} | }} | ||
The '''Tektronix Type R''' is a plug-in for [[500-series scopes]]. | The '''Tektronix Type R''' is a plug-in for [[500-series scopes]]. | ||
Latest revision as of 12:56, 10 December 2023
The Tektronix Type R is a plug-in for 500-series scopes. It is designed to measure risetime of a NPN and PNP transistors, but it works well with FETs as well.
Type R can operate in grounded-emitter or grounded-base configurations. In the grounded-emitter configuration, it provides a variable collector voltage through a collector resistor which is used to sense the collector current. It provides a base bias voltage and a base pulse signal, fed to the base of the transistor through a resistor. The base pulse is generated by a mercury switch and its rise time is specified to be less than 5 nanoseconds. Base and collector bias conditions can be set independently.
The collector signal is AC-coupled to an amplifier whose output is fed to the oscilloscope. The Type R has its own on-board low-voltage, high-current regulated power supplies which feature germanium power transistors.
Type R was introduced in 1958, along with the 551, 533, and 543 mainframes, and the Type H plug-in. It is the first plug-in with transistors. It was dropped after 1966.
Pictures
-
Type R plug-in with fixtures
-
-
-
-
-
-
-
-
-
-
Late serial number Type R
-
Late serial number Type R
-
Late serial number Type R
-
Late serial number Type R
-
Late serial number Type R
-
Late serial number Type R
-
Type R with 386-852
-
386-852, 386-853, 386-854, 386-855, 386-856, and 386-857 fixtures for use with Type R.
-
Components
Some Parts Used in the R
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 12AT7 | 154-0039-00 | Vacuum Tube (Dual Triode) | dual high-gain triode | 161 • 180 • 310 • 310A • 315 • 316 • 360 • 502 • 502A • 511A • 512 • 513 • 513D • 514 • 514AD • 514D • 516 • 524 • 529 • RM529 • 544 • 546 • 547 • 556 • 565 • 570 • 3A2 • 75 • 3A75 • 1M1 • A • B • C • G • H • K • L • ML • M • N • K • R • S • Z • Keithley 610B |
| 12AU6 | 154-0040-00 | Vacuum Tube (Pentode) | RF pentode | 81 • 112 • 1L10 • 1L20 • 1L60 • 3L10 • 512 • 556 • 575 • 545 • 547 • 549 • 581 • 585 • A • B • C • G • K • H • L • ML • M • N • O • R • S • Z |