User:Peter: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
Tek-7904-front.jpg | [[7904]] | Tek-7904-front.jpg | [[7904]] | ||
Tek7844-front.jpg | [[7844]] | Tek7844-front.jpg | [[7844]] | ||
Tek7104-front.jpg | [[7104]] | |||
</gallery> | </gallery> | ||
Line 93: | Line 93: | ||
File:Tri-100k w.jpg | sub-millivolt triangle signal displayed through 7A22, BW=100 kHz | File:Tri-100k w.jpg | sub-millivolt triangle signal displayed through 7A22, BW=100 kHz | ||
File:Tri-1000k w.jpg | sub-millivolt triangle signal through 7A22, BW=1 MHz | File:Tri-1000k w.jpg | sub-millivolt triangle signal through 7A22, BW=1 MHz | ||
File:Tek7104-200ps-singleshot.jpg | 7104 recording a single shot pulse (from [[067-0587-02]]) at 200ps/Div. Camera: Nikon D7100, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed. | |||
File:Tek7104-200ps-singleshot-sin1-1g.jpg | 7104 recording 1 GHz sine, single shot at 200ps/Div. Camera: Nikon D7100, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed. CRT amplification loss is evident around the center line. | |||
</gallery> | </gallery> |
Revision as of 12:50, 29 June 2015
Scopes
Plugins
Screen shots
-
BC337 on 7CT1N
-
P6202 rise time
-
P6202 rise time
-
A 7B92A (B098xxx) displaying a 1.01 GHz sine in HF Sync mode (7904 mainframe, 7A19 amplifier)
-
A 7B92A (B098xxx) triggering a 974 MHz sine applied via 067-0587-02 calibration fixture
-
Signal beam interruption by readout seen on beam 2 of a 7844
-
Classic readout board diagnostic display
-
15 μV p-p triangle wave measured through 7A22. Using variable-persistence storage mode on a 7613 for noise filtering.
-
Tektronix 067-0587-02, gain mode, in horizontal slot
-
Tektronix 067-0587-02, gain mode, in vertical slot
-
7D14 screen picture - 500 MHz signal (7A19, 7B92A, 7904)
-
7B85 used for rise time measurement
-
7B85 used for rise time measurement
-
7B85 used for pulse width measurement
-
7B85 used for pulse period measurement
-
7B85 used for pulse period measurement
-
7S11/7T11, 1 GHz sine, smooth mode, on variable-persistence storage scope (7613)
-
7S11/7T11, 1 GHz sine, smooth mode
-
7S11/7T11, 1 GHz sine, normal mode
-
7S11/S-4 and 7T11A displaying 1 GHz sine
-
7S12 as a sampler displaying a 1 GHz signal (hi-res mode / storage)
-
7S12 as a sampler displaying a 1 GHz signal (hi-res mode / storage)
-
7S12 as a sampler displaying a 1 GHz signal (normal mode / non-storage)
-
7S12 displaying the incident pulse from an S-52 (nom. < 25 ps) through an S-6 head (nom. < 30 ps)
-
7S12/S-6/S-52 "Self Portrait" - pulse reflected on S-6 "through" path (approx. 120 ps one way)
-
sub-millivolt triangle signal displayed through 7A22, BW=1 kHz
-
sub-millivolt triangle signal displayed through 7A22, BW=10 kHz
-
sub-millivolt triangle signal displayed through 7A22, BW=100 kHz
-
sub-millivolt triangle signal through 7A22, BW=1 MHz
-
7104 recording a single shot pulse (from 067-0587-02) at 200ps/Div. Camera: Nikon D7100, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed.
-
7104 recording 1 GHz sine, single shot at 200ps/Div. Camera: Nikon D7100, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed. CRT amplification loss is evident around the center line.