3A10: Difference between revisions

Latest revision as of 16:55, 5 December 2023

Tektronix 3A10
Transducer amplifier plug-in Tektronix 3A10 Compatible with 560-series scopes Produced from 1971 to 1975 Manuals Tektronix 3A10 Manual (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 3A10 is a differential amplifier plug-in for 560-series scopes.

It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer. It also has a 6-pin input connector (Bendix MS3102A-10-6S) to directly connect to the 015-0169-00 Strain Gage Adapter.

The 3A10 circuit is partially based on the 1A7A's.

Key Specifications

Deflection	10 μV/Div to 10 V/Div in 1–2–5 sequence
Input impedance	1 MΩ // 47 pF (Volts mode) or 10 MΩ (transducer mode)
Bandwidth	When DC coupled: DC to 1 MHz When AC coupled: 1.6 Hz to 10 MHz in 1 MΩ Mode, 0.16 Hz to 10 MHz in 10 MΩ Mode Under either AC or DC coupling: LF limit: switchable: DC, 0.1 Hz to 10 kHz in six steps, plus DC offset HF limit: switchable: 100 Hz to 1 MHz in nine 1-3-10 steps
Signal ranges

Range	Differential signal	DC Offset	Common mode
10 μV/Div to 10 mV/Div	±1 V	±1 V	±10 V
20 mV/Div to 0.1 V/Div	±10 V	±10 V	±100 V
0.2 V/Div to 1 V/Div	±100 V	±100 V	±500 V
2 V/Div to 10 V/Div	±1000 V	±1000 V	±500 V

Transducers

015-0108-00 Rotary Function Generator (angular position)
015-0116-00 Vibration (engine)
015-0117-00 Pressure, 3000 psig (engine)
015-0119-00 Reference Mark (rpm)
015-0161-00 Pressure, 3000 psig (strain gauge)
015-0162-00 Pressure, 300 psig (strain gauge)
015-0164-00 Force, Displacement (strain gauge)
015-0165-00 Acceleration
015-0166-00 Vibration, Vertical Velocity and Acceleration
015-0167-00 Vibration, Horizontal Velocity and Acceleration
015-0168-00 Displacement (LVDT)
015-0173-00 Temperature (thermocouple)

Accessories

012-0136-00 Cable, 20' BNC to BNC
012-0209-00 Cable, 20' Shielded 6-Conductor (connector on each end)
012-0210-00 Cable, 20' Shielded 6-Conductor (connector on one end)
012-0211-00 Cable, 20' BNC to Miniature Coaxial
015-0169-00 Strain Gage Adapter
015-0170-00 Deflection Scale Package
015-0171-00 Set of 5 Strain Gauges
015-0172-00 Strain Gauge Cement Kit
131-0618-00 Connector 3106A-10-6P (male)
131-0961-00 Connector 3101A-10-6S (female)

Links

Documents Referencing 3A10

Document	Class	Title	Authors	Year	Links
Tekscope 1971 V3 N3 May 1971.pdf	Article	The Oscilloscope and Transducer Measurements	Ken Arthur	1971	3A10

Pictures

Top
Right
Left
Front
Bottom
Front

Components

Some Parts Used in the 3A10

Part	Part Number(s)	Class	Description	Used in
151-0261-00	151-0261-00	Discrete component	dual PNP transistor	AM501 • AM502 • CG5001 • CG551AP • FG501 • FG502 • FG503 • OF150 • OF151 • OF152 • OF235 • OS261 • RM502A • R1140 • R5030 • R5031 • R7912 • 067-0679-00 • 067-0807-00 • 1101 • 1140A • 1141 • 1142 • 1350 • 145 • 1450 • 1480 • 1481 • 1482 • 1485 • 1501 • 1801 • 1900 • 1910 • 1980 • 213 • 26A1 • 26A2 • 2620 • 285 • 3A9 • 3A10 • 3S1 • 3S2 • 3S5 • 3S6 • 432 • 434 • 4501 • 454 • 4601 • 4602 • 4610 • 4612 • 4620 • 4632 • 4634 • 4701 • 475 • 492 • 492A • 492AP • 494 • 494P • 496 • 496P • 5A13N • 5A20N • 5A21N • 5A22N • 5A26 • 5L4N • 502A • 5030 • 5031 • 576 • 690SR • 7A22 • 7A29 • 7B51 • 7B71 • 7J20 • 7L5 • 7S11 • 7S12 • 7912AD

@@ Line 1: / Line 1: @@
-{{Plugin Sidebar 2 |
+{{Plugin Sidebar
-title=Tektronix 3A10 |
+|manufacturer=Tektronix
-summary=Transducer Amplifier |
+|series=560-series scopes
-image=Tek 3a10.jpg |
+|type=3A10
-caption=Tektronix 3A10 front |
+|summary=Transducer amplifier plug-in
-series=[[560-series scopes]]|
+|image=Tek 3a10 front2.jpeg
-introduced=1971 |
+|caption=Tektronix 3A10
-discontinued=1975 |
+|designers=
-manuals=
+|introduced=1971
-* [http://bama.edebris.com/download/tek/3a10/tek%203a10.v6.pdf Tektronix 3A10 Manual (PDF)]
+|discontinued=1975
+|manuals=
+* [[Media:070-1062-00.pdf|Tektronix 3A10 Manual]]
 }}
-The '''Tektronix 3A10''' is an amplifier plug-in for [[560-series scopes]].
+The '''Tektronix 3A10''' is a differential amplifier plug-in for [[560-series scopes]].
-It is intended for use with transducers and for that purpose it has a DC-coupled differential input
-and a variable voltage supply for powering the transducer.
+It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer.  It also has a 6-pin input connector (Bendix MS3102A-10-6S) to directly connect to the [[015-0169-00|015-0169-00 Strain Gage Adapter]].
-It also has a 6 pole connector to directly connect to the Strain Gage Adapter [[015-0169-00]].
+The 3A10 circuit is partially based on the [[1A7A]]'s.
+{{BeginSpecs}}
+{{Spec | Deflection | 10 μV/Div to 10 V/Div in 1–2–5 sequence }}
+{{Spec | Input impedance | 1 MΩ // 47 pF (Volts mode) or 10 MΩ (transducer mode) }}
+{{Spec | Bandwidth | When DC coupled: DC to 1 MHz
+When AC coupled: 1.6 Hz to 10 MHz in 1 MΩ Mode, 0.16 Hz to 10 MHz in 10 MΩ Mode
+Under either AC or DC coupling:
+* LF limit: switchable: DC, 0.1 Hz to 10 kHz in six steps, plus DC offset
+* HF limit: switchable: 100 Hz to 1 MHz in nine 1-3-10 steps}}
+{{Spec | Signal ranges | }}
+{| class="wikitable" border=1 style="margin-left: 8em;" |
+!Range
+! Differential signal
+! DC Offset
+! Common mode
+|-
+| 10 μV/Div to 10 mV/Div || ±1 V    || ±1 V     || ±10 V
+|-
+| 20 mV/Div to 0.1 V/Div || ±10 V   || ±10 V    || ±100 V
+|-
+| 0.2 V/Div to 1 V/Div   || ±100 V  || ±100 V   || ±500 V
+|-
+| 2 V/Div to 10 V/Div    || ±1000 V || ±1000 V  || ±500 V
+|-
+|}
+==Transducers==
+* [[015-0108-00]] Rotary Function Generator (angular position)
+* [[015-0116-00]] Vibration (engine)
+* [[015-0117-00]] Pressure, 3000 psig (engine)
+* [[015-0119-00]] Reference Mark (rpm)
+* [[015-0161-00]] Pressure, 3000 psig (strain gauge)
+* [[015-0162-00]] Pressure, 300 psig (strain gauge)
+* [[015-0164-00]] Force, Displacement (strain gauge)
+* [[015-0165-00]] Acceleration
+* [[015-0166-00]] Vibration, Vertical Velocity and Acceleration
+* [[015-0167-00]] Vibration, Horizontal Velocity and Acceleration
+* [[015-0168-00]] Displacement (LVDT)
+* [[015-0173-00]] Temperature (thermocouple)
+==Accessories==
+* [[012-0136-00]] Cable, 20' BNC to BNC
+* [[012-0209-00]] Cable, 20' Shielded 6-Conductor (connector on each end)
+* [[012-0210-00]] Cable, 20' Shielded 6-Conductor (connector on one end)
+* [[012-0211-00]] Cable, 20' BNC to Miniature Coaxial
+* [[015-0169-00]] Strain Gage Adapter
+* [[015-0170-00]] Deflection Scale Package
+* [[015-0171-00]] Set of 5 Strain Gauges
+* [[015-0172-00]] Strain Gauge Cement Kit
+* [[131-0618-00]] Connector 3106A-10-6P (male)
+* [[131-0961-00]] Connector 3101A-10-6S (female)
+==Links==
+{{Documents|Link=3A10}}
 ==Pictures==
 <gallery>
+Tek 3a10 front2.jpeg
 Tek 3a10.jpg
 a10 1.jpg
 a10 2.jpg
 a10 3.jpg
-Tek 3a10 top.jpg|top
+Tek 3a10 top.jpg   | Top
-Tek 3a10 right.jpg|right
+Tek 3a10 right.jpg | Right
-Tek 3a10 left.jpg|left
+Tek 3a10 left.jpg  | Left
-Tek 3a10 front2.jpg|front
+Tek 3a10 front2.jpg| Front
-Tek 3a10 bottom.jpg|bottom
+Tek 3a10 bottom.jpg| Bottom
-Tek 3a10 front.jpg|front
+Tek 3a10 front.jpg | Front
 </gallery>
+==Components==
+{{Parts|3A10}}
 [[Category:560 series plugins]]