647: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
(Prefer local copies, OCR, prefer PDF)
 
(38 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |
{{Oscilloscope Sidebar  
title=Tektronix 647 |
|manufacturer=Tektronix
summary=50 MHz scope |
|model=647
image=647a_1.jpg|
|series=647
caption=647A front view |
|summary=50 MHz scope
introduced=1963 |
|image=647a_1.jpg
discontinued=1967 |
|caption=647A front view
manuals=
|introduced=1963
* [http://w140.com/Tek_647_2.pdf Tektronix 647 Manual (PDF)]
|discontinued=1967
* [http://w140.com/kurt/647.pdf Tektronix 647 Manual (PDF scan of a photocopy)]
|designers=Oz Svehaug;Oliver Dalton;Jim Knapton;
* [http://w140.com/RM647_schematics.pdf Tektronix RM647 Schematics (large format, PDF)]
|manuals=
* [http://bama.edebris.com/download/tek/647a/tek%20647a.djvu Tektronix 647A Manual (DjVu)]
* [[Media:070-370.pdf|Tektronix 647 Manual]]
* [http://w140.com/tek_647_tentative.pdf Tektronix 647 Tentative Specifications (PDF)]
* [[Media:Tektronix RM647 schematics.pdf|Tektronix RM647 schematics]] (large format)
* [[Media:Tektronix 647 tentative specifications.pdf|tentative specifications.pdf]]
* [[Media:120_0332.pdf|Tektronix 647 HV transformer winding data]]
* [[Media:Tek 647 notes.pdf|Type 647 Notes]]
* [[Media:Tek 647a cal outline.pdf|Tektronix Type 647 and 647A Calibration Outline]] (OCR)
* [[Media:070-0614-00.pdf|Tektronix 647A Manual]]
}}
}}
The '''Tektronix 647''' is a 50 MHz oscilloscope with plug-ins for both vertical and horizontal deflection.   
The '''Tektronix 647''' is a 50 MHz oscilloscope with plug-ins for both vertical and horizontal deflection.   
It was introduced in late 1963, along with a minimal set of plug-ins, and replaced by the higher bandwidth [[647A]] in 1967.
It was introduced in late 1963, along with a minimal set of plug-ins, and replaced by the higher bandwidth [[647A]] in 1967.
Except for the CRT and the rectifiers in the HV power supply, the 647 is all solid state.
Except for the CRT and the rectifiers in the HV power supply, the 647 is all solid state.


The intent was to offer a higher performance scope in a small form factor,  
The original 647 project leader was [[Oz Svehaug]] in 1962. From 1963 onward, [[Oliver Dalton]]  took over.
roughly the size and weight of the [[560-series_scopes|560 series]].  Additionally,
 
the 647 was promoted as “ruggedized” with an extended operating temperature range,  
The intent was to offer a higher performance scope in a small form factor, roughly the size and weight of the [[560-series_scopes|560 series]].   
and higher shock and vibration ratings than previous lab grade instruments.   
It was promoted as “ruggedized” with an extended operating temperature range, and higher shock and vibration ratings than previous lab grade instruments.   


The 647 uses 10 series vertical and 11 series time base plug-ins.   
The 647 uses 10 series vertical and 11 series time base plug-ins.   
At introduction, the [[10A2]] a dual channel 50 MHz vertical,  
At introduction, the [[10A2]] a dual channel 50 MHz vertical, [[11B1]] single time base, and [[11B2]] dual time base were offered.   
[[11B1]] single time base, and [[11B2]] dual time base were offered.   
The [[10A1]] 45 MHz differential comparator was introduced in 1965, the [[10A2A]] amplifier in 1967.
These plug-ins are unique to the 647 and 647A.   
The 10 and 11 series plug-ins are unique to the 647 and 647A.   


==Specifications==
{{BeginSpecs}}
[[Category:Specifications needed]]''please add''
{{Spec | Bandwidth            | DC to 50 MHz with [[10A2|10A2 plug-in]], 45 MHz with [[10A1]] (35 MHz at <5 mV/div) }}
{{Spec | Rise time            | 5.8 ns with 10A2, 7.8 ns with 10A1 (10 ns at <5 mV/div)}}
{{Spec | CRT                  | [[T6470]], P31 std / P11 opt., 6 cm × 10 cm, 14 kV acceleration }}
{{Spec | Power                | 108/115/122/216/235/244 V<sub>AC</sub> ±10%,selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz; 185W with [[10A2]] & [[11B2]]  plug-in }}
{{Spec | Operating Temperature | –30 C° to +65 C°}}
{{Spec | Cooling              | AC Fan (only in rack variant) }}
{{Spec | Thermal Protection    | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }}
{{Spec | Weight                | 18.4 kg (40.5 lbs) }}
{{EndSpecs}}


==Internals==
==Internals==
Unlike the threaded knob used for retaining the [[letter-series and 1-series plug-ins|530/540 series plug-ins]],  
Unlike the threaded knob used for retaining the [[letter-series and 1-series plug-ins|530/540 series plug-ins]], the 647 uses a lever-actuated cam mechanism.   
the 647 uses a lever actuated cam mechanism.   
The single lever both engages and disengages the plug-in with a quick, smooth motion.   
The single lever both engages and disengages the plug-in with a quick, smooth motion.   
Many users considered it to be the best plug-in retaining system Tek had ever offered.
Many users considered it to be the best plug-in retaining system Tek had ever offered.


Unlike the [[560-series_scopes|560 series]]  
Unlike the [[560-series_scopes|560 series]] where the plug-ins directly drive the CRT deflection plates, the 647 has amplifiers for both the vertical and horizontal signals in the mainframe.   
where the plug-ins directly drive the CRT deflection plates,  
In addition to supporting the higher bandwidth, the amplifiers provide a normalized gain at the plug-in interface, eliminating the need to adjust the gain or sweep cal every time a plug-in was swapped.   
the 647 has amplifiers for both the vertical  
and horizontal signals in the mainframe.   
In addition to supporting the higher bandwidth,  
the amplifiers provide a normalized gain at the plug-in interface,  
eliminating the need to adjust the gain or  
sweep cal every time a plug-in was swapped.   


The 647 has a 140 ns [[delay line]] between the vertical plug-in
The 647 has a 140 ns [[delay line]] between the vertical plug-in connector and the input of the vertical amplifier.   
connector and the input of the vertical amplifier.   
The interface between the vertical plug-in and the mainframe is a 93 Ω controlled-impedance connection.   
The interface between the vertical plug-in and the mainframe  
This is in contrast to the [[500-series scopes]], which appear to the plug-in as a high impedance.
is a 93 Ω controlled-impedance connection.   
This is in contrast to the [[500-series scopes]],  
which appear to the plug-in as a high impedance.


The horizontal and vertical plug-ins are not electrically interchangeable.   
The horizontal and vertical plug-ins are not electrically interchangeable.   
Only a 10 series plug-in will work in the vertical compartment,  
Only a 10 series plug-in will work in the vertical compartment, and only a 11 series time base will work in the horizontal compartment.   
and only a 11 series time base will work in the horizontal compartment.   
X-Y mode requires the use of the external horizontal input in an 11 series time base.
X-Y mode requires the use of the external horizontal input in an 11 series time base.


The 647 uses the [[T6470]] CRT with electromagnetic [[trace rotation]] and  
The 647 uses the [[T6470]] CRT with electromagnetic [[trace rotation]] and 14 kV total accelerating voltage.
14 kV total accelerating voltage.
The HV power supply contains five [[5642]] rectifier tubes: three for the +11.2 kV CRT anode supply, one for the -2.2 kV CRT cathode, and one for the -2.2 kV CRT grid/blanking.   
The HV power supply contains five [[5642]] rectifier tubes:  
three for the +11.2 kV CRT anode supply, one for the -2.2 kV CRT cathode,
and one for the -2.2 kV CRT grid/blanking.   


The calibrator in the 647 is based on a 4 kHz crystal,  
The calibrator in the 647 is based on a 4 kHz crystal, which is divided down to 1 kHz ±1 Hz.
which is divided down to 1 kHz.
 
Its specified tolerance is +/- 1Hz.
The solid extender for 647 plug-ins is the [[013-077]].


==Pictures==
==Pictures==
===647===
<gallery>
Tek 647 10a1 11b2.jpg | 647 with [[10A1]] and [[11B2]]
Tek 647 right.jpg    | 647 Right Side
647 MOD165K.JPG      | 647 with MOD165K
</gallery>
===647A===
<gallery>
647a_1.jpg  | 647A Front View
647a_2.jpg  | 647A Left View
647a_4.jpg  | 647A Right View
647a_3.jpg  | 647A Rear View
Tek 647a front.jpg | 647A with [[10A1]] and [[11B2|11B2A]]
Tek 647a left.jpg  | 647A
Tek 647a rear.jpg  | 647A
Tek 647a rear connections.jpg | 647A rear connections
Tek 10a2a 11b2a.jpg | [[10A2 | 10A2A]] and [[11B2 | 11B2A]] in 647A
Tek 647a rear2.jpg  | 647A
Tek 647a right internal.jpg | 647A
Tek 647a left internal.jpg  | 647A
Tek 647a rear ps.jpg | 647A
Tek 647a trace6.jpg  | 647A
Tek 647a trace5.jpg  | 647A
Tek 647a trace4.jpg  | 647A
Tek 647a trace3.jpg  | 647A
Tek 647a trace2.jpg  | 647A
Tek 647a trace1.jpg  | 647A
</gallery>
===RM647===
<gallery>
<gallery>
File:647a_1.jpg|647A front view
RM647_1.JPG   | RM647 Front View
File:647a_2.jpg|647A left view
Tek rm647.jpg | RM647
File:647a_4.jpg|647A right view
File:647a_3.jpg|647A rear view
File:Tek r647a.jpg|R647A front view
File:RM647_1.JPG|RM647 front view
File:Tek rm647.jpg|RM647
File:Tek r647a inside.jpg|RM647 inside view
File:Sideways r647a.jpg|Special R647A for US Air Force
File:Sideways r647a rear.jpg|Rear panel of the Air Force R647A
Tek 647a front.jpg|647A
Tek 647a left.jpg|647A
Tek 647a rear.jpg|647A
Tek 647a rear connections.jpg|647A rear connections
</gallery>
</gallery>


==Components==
{{Parts|647}}
{{Parts|RM647}}


[[Category:Introduced in 1963]]
[[Category:Introduced in 1963]]
[[Category:647 series scopes]]
[[Category:647 series scopes]]

Latest revision as of 10:40, 14 August 2024

Tektronix 647
50 MHz scope
647A front view

Produced from 1963 to 1967

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 647 is a 50 MHz oscilloscope with plug-ins for both vertical and horizontal deflection. It was introduced in late 1963, along with a minimal set of plug-ins, and replaced by the higher bandwidth 647A in 1967. Except for the CRT and the rectifiers in the HV power supply, the 647 is all solid state.

The original 647 project leader was Oz Svehaug in 1962. From 1963 onward, Oliver Dalton took over.

The intent was to offer a higher performance scope in a small form factor, roughly the size and weight of the 560 series. It was promoted as “ruggedized” with an extended operating temperature range, and higher shock and vibration ratings than previous lab grade instruments.

The 647 uses 10 series vertical and 11 series time base plug-ins. At introduction, the 10A2 a dual channel 50 MHz vertical, 11B1 single time base, and 11B2 dual time base were offered. The 10A1 45 MHz differential comparator was introduced in 1965, the 10A2A amplifier in 1967. The 10 and 11 series plug-ins are unique to the 647 and 647A.

Key Specifications

Bandwidth DC to 50 MHz with 10A2 plug-in, 45 MHz with 10A1 (35 MHz at <5 mV/div)
Rise time 5.8 ns with 10A2, 7.8 ns with 10A1 (10 ns at <5 mV/div)
CRT T6470, P31 std / P11 opt., 6 cm × 10 cm, 14 kV acceleration
Power 108/115/122/216/235/244 VAC ±10%,selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz; 185W with 10A2 & 11B2 plug-in
Operating Temperature –30 C° to +65 C°
Cooling AC Fan (only in rack variant)
Thermal Protection Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Weight 18.4 kg (40.5 lbs)

Internals

Unlike the threaded knob used for retaining the 530/540 series plug-ins, the 647 uses a lever-actuated cam mechanism. The single lever both engages and disengages the plug-in with a quick, smooth motion. Many users considered it to be the best plug-in retaining system Tek had ever offered.

Unlike the 560 series where the plug-ins directly drive the CRT deflection plates, the 647 has amplifiers for both the vertical and horizontal signals in the mainframe. In addition to supporting the higher bandwidth, the amplifiers provide a normalized gain at the plug-in interface, eliminating the need to adjust the gain or sweep cal every time a plug-in was swapped.

The 647 has a 140 ns delay line between the vertical plug-in connector and the input of the vertical amplifier. The interface between the vertical plug-in and the mainframe is a 93 Ω controlled-impedance connection. This is in contrast to the 500-series scopes, which appear to the plug-in as a high impedance.

The horizontal and vertical plug-ins are not electrically interchangeable. Only a 10 series plug-in will work in the vertical compartment, and only a 11 series time base will work in the horizontal compartment. X-Y mode requires the use of the external horizontal input in an 11 series time base.

The 647 uses the T6470 CRT with electromagnetic trace rotation and 14 kV total accelerating voltage. The HV power supply contains five 5642 rectifier tubes: three for the +11.2 kV CRT anode supply, one for the -2.2 kV CRT cathode, and one for the -2.2 kV CRT grid/blanking.

The calibrator in the 647 is based on a 4 kHz crystal, which is divided down to 1 kHz ±1 Hz.

The solid extender for 647 plug-ins is the 013-077.

Pictures

647

  • 647 with 10A1 and 11B2

    647 with 10A1 and 11B2

  • 647 Right Side

    647 Right Side

  • 647 with MOD165K

    647 with MOD165K

647A

  • 647A Front View

    647A Front View

  • 647A Left View

    647A Left View

  • 647A Right View

    647A Right View

  • 647A Rear View

    647A Rear View

  • 647A with 10A1 and 11B2A

    647A with 10A1 and 11B2A

  • 647A

    647A

  • 647A

    647A

  • 647A rear connections

    647A rear connections

  • 10A2A and 11B2A in 647A

    10A2A and 11B2A in 647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

  • 647A

    647A

RM647

  • RM647 Front View

    RM647 Front View

  • RM647

    RM647

Components

Some Parts Used in the 647

Part Part Number(s) Class Description Used in
5642 154-0051-00 • 154-0079-00 Vacuum Tube (Diode) directly-heated high-voltage rectifier 310 • 310A • 316 • 317 • 360 • 453 • 502 • 502A • 503 • 504 • 506 • 513 • 515 • 516 • 524 • 529 • RM529 • 533 • 533A • 535 • 536 • 543 • 543A • 543B • 545 • 545A • 545B • 547 • 551 • 555 • 556 • 560 • 561 • 561A • 561S • 564 • 567 • 570 • 575 • 581 • 581A • 585 • 585A • 647 • 647A
T6470 154-0434-00 • 154-0448-00 CRT CRT 647 • 647A


Some Parts Used in the RM647

(no results)
Retrieved from "https://w140.com/tekwiki/index.php?title=647&oldid=96650"