2432: Difference between revisions

Latest revision as of 04:23, 4 September 2024

Tektronix 2432
300 MHz, 100 MS/s 2-ch digital scope Tektronix 2432 Produced from (?) to (?) Manuals 2432 Operator Manual (OCR) 2432 Programmer's Reference Guide 2432 Service Manual 2432A (1990 to ?) 2432A Operator Manual 2432A Programmer's Reference Guide Other 2430A/2432A/2440 catalog page (OCR) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2432 is a 300 MHz, 100 MS/s dual-channel portable digital scope. It does not appear in any (?) Tektronix Catalogs.

Its successor, the 2432A introduced in 1989, has an increased sampling rate of 250 megasamples/s.

WARNING: Operation of the 2440, 2439, 2432, 2432A, 2431L, 2430, 2430A and 2424L: The A/D-converter and CCD hybrids may suffer irreparable damage within a few minutes if operated out of the metal enclosure without extra cooling.

Key Specifications

Bandwidth	300 MHz (Limit: 20, 50, Full)
Rise time	1.2 ns (Repeat on, 16×averaging)
Sampling rate	2432: 100 MS/s / 2432A: 250 MS/s
Sampling type	Real time: 200 ns/Div and slower, Equivalent time 100 ns/Div and faster
Single event bandwidth	100 MHz (2432A)
Glitch capture	2 ns
Deflection	2 mV/div to 5 V/div in 1-2-5 sequence
Resolution	8 bit
Record length	1024 samples
Input impedance	1 MΩ // 15 pF or 50 Ω
Sweep speeds	2 ns/div to 5 s/div in 1-2-5 sequence (Modes A, A Intensified and B)
Acquisition modes	Normal, Envelope (glitch capture), Average
Display modes	CH1, CH2, invert, add, multiply, X-Y
Cursors	Volts, Time, Volts At Time, 1/Time, Slope
Functions	A Mode - Auto Level, Auto/Roll, Normal and Single Seq; B Mode - Trigger After Delay, Runs After Delay, 1K Record Length and more
Interface	GPIB
Features	Autoprobe Function With P6137 Probe On-Screen Readout indicates probe tip deflection factors for ×1, ×10, ×100 and ×1000 probes Printer/Plotter Output On-screen HELP text describing every front-panel control

Options

03 - Word Recognizer (P6407)
05 - Video Waveform Measurement System
11 - Two probe-power connectors on the rear panel

Links

Tek 2432 @ YouTube
Tek 2432A display repair / PSU re-cap @ YouTube
2432 SMPS repair - lots of internal pictures, text in German (→ Google Translate)

Internals

Proprietary ICs in the 2430 include:

A10U100 155-0238-00 EXT TRIGGER PREAMP 
A10U150 155-0239-02 A/B TRIGGER 
A10U320,A10U420 165-2235-01 LOW NOISE VERT PREAMP HYBRID
A10U340,A10U440 165-2215-00 PEAK DETECTOR
A10U350,A10U450 165-2206-00 CCD/CLOCK DRIVER 
A10U370 230-0002-50 (M299) TRIGGER LOGIC ARRAY 
A10U470 230-0001-50 (M299) PHASE CLOCK ARRAY 
A11U670 156-2381-00 TIME BASE CONTROLLER (STD CELL)
A12U470 156-2380-00 WAVEFORM PROCESSOR, CUST.

Pictures

2432

2432A

Components

Some Parts Used in the 2432

Part	Part Number(s)	Class	Description	Used in
148-0140-00	148-0140-00	Discrete component	miniature bi-stable relay actuator	2424L • 2430 • 2431L • 2432 • 2439 • 2440 • 119-1445-02
154-0850-01	154-0850-00 • 154-0850-01	CRT	CRT	2424L • 2430 • 2430A • 2431L • 2432 • 2439 • 2440 • 2445 • 2465 • 2465A • 2465B
155-0238-00	155-0238-00	Hybrid integrated circuit	preamplifier	11302A • 2424L • 2430 • 2430A • 2432 • 2445 • 2465 • 2466 • 2467
155-0239-00	155-0239-00 • 155-0239-01 • 155-0239-02	Hybrid integrated circuit	trigger	2424L • 2430 • 2430A • 2432 • 2445 • 2465 • 2467 • 2400-series scopes • 11201 • 11401 • 11402
165-2273-00	165-2273-00	Hybrid integrated circuit	peak detector	2432 • 2432A • 2440
230-0001-50	230-0001-50	Hybrid integrated circuit	phase clock array	2424L • 2430 • 2430A • 2432
230-0002-50	230-0002-50	Hybrid integrated circuit	trigger logic array	2424L • 2430 • 2430A • 2432

@@ Line 3: / Line 3: @@
 |series=2400-series scopes
 |model=2432
-|image=Tek2432A.jpg
+|image=Tek_2432_ebay_1.jpg
 |caption=Tektronix 2432
 |introduced=(?)
@@ Line 19: / Line 19: @@
 * [[Media:2430A-2432A-2440-catalog.pdf|2430A/2432A/2440 catalog page]] (OCR)
 }}
-The '''Tektronix 2432''' is a 300 MHz, 100 MS/s dual-channel portable digital scope.
+The '''Tektronix 2432''' is a 300 MHz, 100 MS/s dual-channel portable digital scope. It does not appear in any (?) [[Tektronix Catalogs]].
-Its successor, the '''2432A''', has an increased sampling rate of 250 megasamples/s.
+Its successor, the '''2432A''' introduced in 1989, has an increased sampling rate of 250 megasamples/s.
 <blockquote>
-'''WARNING:''' Operation of the 2440, 2432, 2432A, 2430, and 2430A: A/D-converter and CCD hybrids may suffer irreparable damage within a few minutes if operated out of the metal enclosure without extra cooling.
+'''WARNING:''' Operation of the 2440, 2439, 2432, 2432A, 2431L, 2430, 2430A and 2424L: The A/D-converter and CCD hybrids may suffer irreparable damage within a few minutes if operated out of the metal enclosure without extra cooling.
 </blockquote>
 {{BeginSpecs}}
-{{Spec | Channels | 2 }}
-{{Spec | Resolution | 8 bit }}
-{{Spec | Record length | 1024 samples }}
 {{Spec | Bandwidth | 300 MHz (Limit: 20, 50, Full) }}
+{{Spec | Rise time | 1.2 ns (Repeat on, 16×averaging)}}
 {{Spec | Sampling rate | 2432: 100 MS/s / 2432A: 250 MS/s }}
 {{Spec | Sampling type | Real time: 200 ns/Div and slower, Equivalent time 100 ns/Div and faster}}
@@ Line 37: / Line 35: @@
 {{Spec | Glitch capture | 2 ns }}
 {{Spec | Deflection | 2 mV/div to 5 V/div in 1-2-5 sequence }}
-{{Spec | Input impedance| 1 MΩ // 15 pF or 50Ω }}
+{{Spec | Resolution | 8 bit }}
+{{Spec | Record length | 1024 samples }}
+{{Spec | Input impedance| 1 MΩ // 15 pF or 50 Ω }}
 {{Spec | Sweep speeds | 2 ns/div to 5 s/div in 1-2-5 sequence (Modes A, A Intensified and B)}}
 {{Spec | Acquisition modes| Normal, Envelope (glitch capture), Average }}
@@ Line 74: / Line 74: @@
   A12U470 [[156-2380-00]] WAVEFORM PROCESSOR, CUST.
-{{MissingPics}}
+==Pictures==
+'''2432'''
+<gallery>
+Tek 2432 ebay 1.jpg
+Tek 2432 ebay 1 rear.jpg
+Tek 2432 ebay 1 right.jpg
+Tek 2432 ebay 1 left.jpg
+Tek 2432 ebay 1 bottom.jpg
+</gallery>
+'''2432A'''
+<gallery>
+Tek2432A.jpg
+</gallery>
 ==Components==