7S11: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 73: Line 73:


[[Category:7000 series vertical plugins]]
[[Category:7000 series vertical plugins]]
[[Category:7000 series sampling plug-ins]]
[[Category:7000 series sampling plugins]]

Revision as of 01:02, 22 September 2023

Tektronix 7S11
Sampling plugin
7S11 front view with S-4 sampling head)

Compatible with 7000-series scopes

Produced from 1969 to 1990

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.

It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.

For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode (~50 kHz strobe).

The DC offset voltage as well as the vertical display signal are accessible on the front panel through Pin Tip jacks.

Key Specifications

Deflection  2 to 200 in 1−2−5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW)
DC offset ±1 V
Offset output 10 × offset voltage (±10 V), source impedance 10 kΩ, 2 mm Pin Tip connector
Vertical signal output 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ, 2 mm Pin Tip connector
Delay range at least 10 ns
Weight 0.9 kg (3.25 lbs)

Internals

The 7S11 does not contain integrated circuits (except dual transistors).

Links

Pictures

  • 7S11 with inserted S-4 head

    7S11 with inserted S-4 head

  • 7S11 with empty plugin bay

    7S11 with empty plugin bay

  • 7S11 with inserted S-6 sampling head

    7S11 with inserted S-6 sampling head

  • spring-loaded contact block (right)

    spring-loaded contact block (right)

  • right side, cover removed

    right side, cover removed

  • left side, cover removed

    left side, cover removed

  • right side

    right side

  • left side

    left side

  • 7S11 with S-1

    7S11 with S-1

Measurements

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (normal mode)

    7S11, 7T11, S-4 displaying a 1 GHz sine (normal mode)

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode)

    7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode)

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode, variable-persistence storage display of a 7613 mainframe)

    7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode, variable-persistence storage display of a 7613 mainframe)

  • 7S11 used as 2nd channel with 7S12

    7S11 used as 2nd channel with 7S12

  • Rackmount 7633 with two 7S11 and a 7T11 displaying a 2 GHz sinewave

    Rackmount 7633 with two 7S11 and a 7T11 displaying a 2 GHz sinewave

  • 7704A with 7S11 and 7T11A displaying 4 GHz sizewave

    7704A with 7S11 and 7T11A displaying 4 GHz sizewave

Custom ICs used in the 7S11

Page Model Part nos Description Designers Used in
155-0035-00 M053B 155-0035-00 • 155-0116-00 quad op-amp Mike Metcalf 3110 • 3S7 • 3T7 • 492 • 492A • 492AP • 492P • 494 • 494P • 496 • 496P • 4010 • 4011 • 4012 • 4013 • 7L5 • 7L12 • 7L13 • 7L14 • 7L18 • 7S11 • 7T11 • 7S12 • S-6 • 1461 • 4602 • P7001 • 613 • 653
Retrieved from "https://w140.com/tekwiki/index.php?title=7S11&oldid=85474"