7313

From TekWiki
Revision as of 23:18, 10 April 2022 by Peter (talk | contribs) (removed reference to incorrect Tek page (can no longer find that))
Jump to navigation Jump to search
Tektronix 7313
25 MHz storage mainframe
Tektronix 7313

Produced from 1972 to 1979

Manuals

Modifications

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7313 is a 25 MHz storage oscilloscope mainframe introduced in 1972 that accepts two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. There is also a rack-mount version, the R7313.

Project Engineer for the 7313 was John McCormick. Tim Boege did the electrical design while Cathy Weinstein worked on the mechanical design.

Key Specifications

  • please add

Internals

The direct-view bistable storage CRT (154-0682-02,-10,-12) is 8 cm tall and 10 cm wide. The upper half and lower half are independently controllable with regard to storage settings.

The low voltage power supply is linear. It produces +50V, -50V, +15V, -15V, +5V, and +130V.

The vertical amplifier is fully discrete.

The 7313 is the only 7000-series scope that doesn't use post-deflection acceleration, due to the low bandwidth. CRT cathode voltage is -4 kV.

Prices

1973: $2,000

Options

  • Option 1: Deletes the readout
  • Option 3: Provides EMI shielding
  • Option 5: Special fan for rackmounted instruments, operational on 50-440 Hz
  • Option 7: Deletes the +Sawtooth out, +Gate out, Vert sig out, Ext SS Reset in, Remote Erase In connectors from the rear panel

Links

Pictures

Custom ICs used in the 7313

Page Model Part nos Description Designers Used in
155-0011-00 M012 155-0011-00 clock and chop blanking Les Larson 485 7313 7403N R7403N 7503 7504 7514 7603 AN/USM-281C 7613 7623 7623A 7633 7704 R7704 7704A 7834 7844 7854 7904 7904A R7903 R7912 7912AD 7912HB 7934 7104 R7103 AN/USM-281C
155-0022-00 M036 155-0022-00 155-0022-01 analog multiplexer Gene Andrews 147 148 149 335 468 1430 1441 1461 1900 1910 2220 2221 2230 5223 5403 5440 5441 5443 5444 5A38 7313 7403N 7503 7504 7514 7603 AN/USM-281C 7613 7623 7623A 7633 7704 R7704 7704A 7834 7844 7854 R7912 7912AD 7912HB 7904 R7903 7904A 7934 7A12 7A18 7A18A 7A18N 7B52 7B53N 7D10 7D11 7D12 NT-7000 P7001

Custom ICs used in the 7000 series readout system

Page Model Part nos Description Designers Used in
155-0014-01 M019D 155-0014-00 155-0014-01 analog-to-decimal converter Barrie Gilbert 7000 series readout system 7854 7934 7J20 7L5 P7001
155-0015-01 M020F 155-0015-00 155-0015-01 analog data switch Barrie Gilbert 7000 series readout system 7854 7934
155-0017-00 M025 155-0017-00 5 MHz decade counter Barrie Gilbert 7000 series readout system 7854 7934
155-0018-00 M026 155-0018-00 zeros logic control Les Larson 7000 series readout system 7934
155-0019-00 M027 155-0019-00 decimal point and spacing control Les Larson 7000 series readout system
155-0020-00 M028 155-0020-00 output assembler Les Larson 7000 series readout system
155-0021-00 M029C 155-0021-00 155-0021-01 timing generator Les Larson 7000 series readout system 7854 7934
155-0023-00 M160 155-0023-00 character generator (0 1 2 3 4 5 6 7 8 9) Barrie Gilbert 7000 series readout system
155-0024-00 M161 155-0024-00 character generator (↓ < I / + - + C Δ >) Barrie Gilbert 7000 series readout system
155-0025-00 M162 155-0025-00 character generator (m μ n p X K M G T R) Barrie Gilbert 7000 series readout system
155-0026-00 M163 155-0026-00 character generator (S V A W H d B c Ω E) Barrie Gilbert 7000 series readout system
155-0027-00 M164 155-0027-00 character generator (U N L Z Y P F J Q D) Barrie Gilbert 7000 series readout system