2430
The Tektronix 2430 is a portable dual-channel digital scope from the 2000-series. The updated 2430A was introduced in 1998.
WARNING: Operation of the 2440, 2439, 2432, 2432A, 2431L, 2430, 2430A and 2424L: The A/D-converter and CCD hybrids may suffer irreparable damage within a few minutes if operated out of the metal enclosure without extra cooling.
Key Specifications
| Bandwidth | 150 MHz (Limit: 20, 50, Full) |
|---|---|
| Rise time | 2.33 ns (Repeat on, 16×averaging) |
| Sampling rate | 100 MS/s |
| Sampling type | Real time: 500 ns/Div and slower, Equivalent time 200 ns/Div and faster |
| Single event bandwidth | 40 MHz (2430A) |
| Glitch capture | 2 ns |
| Deflection | 2 mV/div to 5 V/div in 1-2-5 sequence |
| Resolution | 8 bit |
| Record length | 1024 samples |
| Input impedance | 1 MΩ // 15 pF or 50 Ω |
| Sweep speeds | 2 ns/div to 5 s/div in 1-2-5 sequence (Modes A, A Intensified and B) |
| Acquisition modes | Normal, Envelope (glitch capture), Average |
| Display modes | CH1, CH2, invert, add, multiply, X-Y |
| Cursors | Volts, Time, Volts At Time, 1/Time, Slope |
| Functions | A Mode - Auto Level, Auto/Roll, Normal and Single Seq; B Mode - Trigger After Delay, Runs After Delay, 1K Record Length and more |
| Interface | GPIB |
| Probes | Two passive P6133 150 MHz ×10 voltage probes, 1.3 m |
| Features |
|
| Options |
|
Links
- 2430 repair from IanScottJohnston @ YouTube
Documents Referencing 2430
- (no results)
Pictures
Better pictures needed - please contribute
Components
Some Parts Used in the 2430
Proprietary ICs in the 2430 include:
A10U100 155-0238-00 EXT TRIGGER PREAMP A10U150 155-0239-02 A/B TRIGGER A10U320,A10U420 165-2235-02 LOW NOISE VERT PREAMP HYBRID A10U340,A10U440 165-1215-01 PEAK DETECTOR "(NOT REPLACEABLE - ORDER A1O)" A10U350,A10U450 165-2074-01 CCD/CLOCK DRIVER A10U370 230-0002-50 (M299) TRIGGER LOGIC ARRAY A10U470 230-0001-50 (M299) PHASE CLOCK ARRAY A11U670 156-2381-00 TIME BASE CONTROLLER (STD CELL) A12U470 156-2380-00 WAVEFORM PROCESSOR, CUST.