5441
The Tektronix 5441 (5403/D41) is a 60 MHz CRT storage scope. It takes two vertical and one horizontal 5000-series plug-ins.
Key Specifications
| Bandwidth | 60 MHz (with 5A45 or 5A48) / Mainframe 90 MHz (with 067-0680-00 fixture) |
|---|---|
| Calibrator | 400 mV, 4 mA; Twice the power line frequency |
| Z Axis input | DC − 2 MHz |
| CRT | 154-0670-10 or 154-0697-10 (Opt.5), 8 × 10 graticule, 0.9 cm/div, P31 phosphor standard |
| Acceleration voltage | 8.5 kV |
| Power | Nominal 100, 110, 120, 200, 220, 240V(+-10%) 50−400 Hz, 100 W max. |
| Weight | 12.25 kg (27 lbs) |
| Size | 21.3 cm × 26.6 cm × 50.8 cm (H×W×L) |
Links
Pictures
-
-
-
-
-
Tek 5441 Trace
-
Tek 5441 Stored Wave
-
Tek 5441 Front View/Panel
-
Tek 5441 Rear
-
Tek 5441 Top
-
Tek 5441 Under Chassis Cover removed
-
Tek 5441 Side Open RHS
-
Tek 5441 Side Open LHS
-
Tek 5441 Top cover Removed/ H AMP Board
-
Tek 5441 V-AMP Board
-
Tek 5441 Storage Board
-
Tek 5441 Module Interface Board
-
Tek 5441 HV Power Supply without Cover
-
Tek 5441 HV Power Supply Without Cover, Side View
-
Tek 5441 LV Power Supply Board
-
Block Diagram
-
Vertical Amplifier
-
Horizontal Amplifier
-
Z Amplifier and CRT Circuit
-
Storage CRT Circuit
-
Readout
-
Low Voltage Supply
Custom ICs used in the 5441
| Page | Model | Part nos | Description | Designers | Used in |
|---|---|---|---|---|---|
| 155-0022-00 | M036 | 155-0022-00 • 155-0022-01 | analog multiplexer | Gene Andrews | 147 • 148 • 149 • 335 • 468 • 1430 • 1441 • 1461 • 1900 • 1910 • 2220 • 2221 • 2230 • 5223 • 5403 • 5440 • 5441 • 5443 • 5444 • 5A38 • 7313 • 7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • R7912 • 7912AD • 7912HB • 7904 • R7903 • 7904A • 7934 • 7A12 • 7A18 • 7A18A • 7A18N • 7B52 • 7B53N • 7D10 • 7D11 • 7D12 • NT-7000 • P7001 |