SW503: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
|manuals= | |manuals= | ||
* [[Media:070-2051-00.pdf|SW503 Instruction Manual]] (OCR) | * [[Media:070-2051-00.pdf|SW503 Instruction Manual]] (OCR) | ||
* [[Media:A-3328-1 1976-10.jpg|SW 503 data sheet]], Oct 1976 | |||
}} | }} | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
| Line 23: | Line 24: | ||
* Sweep trigger input (10 V pulse ≥1 μs)}} | * Sweep trigger input (10 V pulse ≥1 μs)}} | ||
{{Spec|Options| | {{Spec|Options| | ||
* Opt. 01 – 75 Ω output impedance}} | * Opt. 01 – 75 Ω output impedance | ||
* Detector – [[118-0070-00]] (50 Ω), [[118-0071-00]] (75 Ω) | |||
}} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
Latest revision as of 04:48, 5 October 2024
The Tektronix SW503 is a sweep generator plug-in for the TM500 system.
Key Specifications
| Frequency range | 1 to 400 MHz |
|---|---|
| Sweep width | 200 kHz to 400 MHz |
| Sweep time | 10 ms to 100 s, decade steps plus vernier |
| Output | −40 to +10 dBm into 50 Ω |
| Horizontal output | 0.5 Vp-p |
| Fixed markers | frequency comb with 1, 10, or 50 MHz base frequency |
| Variable marker | 1 to 400 MHz, digital readout on a DC502 Opt.07 counter |
| Features |
|
| Options |
|
Links
Documents Referencing SW503
Rear Interface
| Connector Pin | Signal |
|---|---|
| 28B | Y axis output (common on 28A) |
| 27B | X axis output (common on 27A) |
| 24B | Trigger input (common on 25B) |
| 21B | Amplitude control input (0 – 10 V), common on 22B |
| 20B | Frequency control input (0 – 10 V), common on 22B |
| 18B | Start Count (0/+5 V; positive pulse to trigger the counter) |
| 18A | Gate (0/+5 V; negative gate from counter) |
| 17B | Counter Identify (grounded when counter is installed) |
| 16B | Phase Lock Logic (+5 V: 100 kHz resolution; 0 V: 10 Hz resolution) |
| 15B | CW Mode Logic (+5 V: dot marker function; 0 V: normal counter function) |
| 14B | Sweep Generator Identify (grounded when SW503 is installed) |
Pictures
External
-
-
SW503 in TM515 with other TM500 gear
-
-
SW503 Opt.1
SW503B
-
SW503B catalog picture
Internal
Components
Some Parts Used in the SW503
- (no results)