7403N: Difference between revisions
No edit summary |
No edit summary |
||
(3 intermediate revisions by 3 users not shown) | |||
Line 10: | Line 10: | ||
|designers=Phil Crosby;Bob Shand | |designers=Phil Crosby;Bob Shand | ||
|manuals= | |manuals= | ||
* [[Media:070-1124-00.pdf|Tektronix 7403N Manual]] | * [[Media:070-1124-00.pdf|Tektronix 7403N Manual]] | ||
* [[Media:070-1124-00 color pages.pdf|7403N schematics pages, color]] | * [[Media:070-1124-00 color pages.pdf|7403N schematics pages, color]] | ||
}} | }} | ||
The '''Tektronix 7403N''' is a 65 MHz oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. | The '''Tektronix 7403N''' is a 65 MHz oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. | ||
Line 62: | Line 62: | ||
Tek 7403n 6.jpg | Tek 7403n 6.jpg | ||
Tek 7403n 7.jpg | Tek 7403n 7.jpg | ||
Tek 7403 sine trace.jpeg|7403N trace | |||
Tek 7403N open left.jpg | |||
Tek 7403N open right.jpg | |||
Tek 7403N open top.jpg | |||
</gallery> | </gallery> | ||
==Components== | |||
{{ | {{Parts|7403N}} | ||
[[Category:7000 series non-storage mainframes]] | [[Category:7000 series non-storage mainframes]] | ||
[[Category:7000 series mainframes with linear power supplies]] | [[Category:7000 series mainframes with linear power supplies]] |
Latest revision as of 13:12, 10 February 2024
The Tektronix 7403N is a 65 MHz oscilloscope mainframe that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in. It has a large CRT (8 × 10 divisions @ 1.22 cm each, 154-0640-xx or 154-0672-xx tubes). There is no readout system.
There are two versions, the benchtop 7403N with the CRT above the plug-ins, and a rackmount version, the R7403N, with the CRT to the left of the plug-ins.
The 7403 was designed from the ground up. The design team, led by Phil Crosby, decided to use a discrete transistor vertical output amplifier rather than a hybrid on beryllium oxide. The output stage approximated a 3 pole MFED response with an additional real pole closer to the origin. Since the DC requirement was 3 screen diameters, the gain at the –3 dB point could be substantially less, meaning that the load resistor (and output stage dissipation) could be reduced, allowing the design to meet scan bandwidth and corner shift criteria with substantially reduced power dissipation.
The 7403N was discontinued around 1975, having been superseded largely by the popular 7603 introduced in 1973. In 1974, the 7403N had a list price (without plug-ins) of $950. In the same year, the 7603 was $1600.
Key Specifications
Bandwidth | 65 MHz; 60 MHz with 7A11, 7A16 |
---|---|
Fastest calibrated sweep | 5 ns/Div |
CRT |
|
Calibrator | 40 mV, 400 mV, 4V into 1 MΩ |
Inputs | Ext. Z Axis, 2 Vp-p |
Outputs | Camera power only |
Power | 100 / 110 / 120 / 200 / 220 / 240 V, +/- 10%, 50—440 Hz, max. 130 W |
Weight | 13.6 kg / 30 lb (instrument only) |
Operating Environment | 0°C – +50°C, < 15,000 ft |
The 7403N consumes a maximum of 130 watts and uses convection cooling, no fan. It weighs 30 pounds.
Internals
The power supply is a linear design, similar to that of the 7313. The vertical and horizontal amplifiers are made of discrete bipolar transistors. The only integrated circuit in the vertical signal path is U214, the vertical channel switch, a 155-0022-00.
The 7403N uses a CRT anode voltage of 12 kV, produced by a solid state voltage multiplier.
Pictures
-
-
-
-
-
-
-
-
-
-
7403N trace
-
-
-