2230

Manuals – Specifications – Links – Pictures

The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.

It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.

The 2230 features alphanumeric CRT readout of many of the front panel controls. A DB-9 auxiliary connector on the right side provides an external clock input as well as an analog X-Y plotter output to make permanent copies of the display. This feature can be accessed through the "Mem select" menu.

Some firmware versions have a diagnostics menu with the Tektronix logo and wizard image.

The Cursor knob is prone to failure. It becomes jittery and will not scroll properly.

Options include RS-232 and GPIB interface boards, which include a 32K (26K available) battery backed memory daughter board (the same options for the 2220 and 2221 do not include the memory).

Recommended cart is the K212.

Key Specifications

	— Vertical —
Input impedance	1 MΩ // 20 pF
Maximum Safe Input Voltage	400 V (DC + peak AC) or 800 Vp-p AC
CMRR	At least 10:1 at 10 MHz
	— Horizontal —
Timebase A	50 ns/Div to 0.5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div. In "Store" mode lower sweep speeds up to 5 s/Div are available
Timebase B	50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div
Bandwidth	100 MHz (analog)
Sampling rate	20 MS/s
Record length	1K or 4K samples (single channel), optional 26K
Z axis	input (intensity); DC to 20 MHz, maximum safe input 30 V (DC + peak AC) Input resistance about 10 kΩ
CRT	154-0861-00; display area : 8 × 10 cm²
Dimensions	With feet and handle: 137 x 361 x 511 mm³
Features	X-Y operation Pre/Post-triggering Averaging Dual time base Cursors and readout GPIB and Memory (option 10) RS-232 interface and Memory (option 12)

Links

• Troubleshooting tips on 2200 PSU
• Measuring inductance using a 2230

Internals

The 2230 is controlled by an Intel 8088 microprocessor with firmware in a pair of 27512 EPROMs, and six TMS4426 16K×4 DRAMs. The A/D converter is a Sony CX20052A (8 bit, 20 MHz, ECL output). A pair of MCM2016H 2K×8, 70 ns RAMs serve as acquisition memory.

Pictures

• 
• 
• 
• 
• 
• 
• 
• 

  standard interface board (X-Y)

• 

  2230 GPIB interface board

• 

  During repairs

• 

  uppermost board (A10, CPU and acquisition)

• 

  CPU/acquisition board in service position

CRTs used in the 2230

Page	Part nos	Description	Designers	Used in
154-0861-00	154-0861-00	CRT		2230
T4655	154-0861-00 • 154-0861-10 • 154-0930-00	CRT		2220 • 2221 • 2221A • 2230 • 2232

Custom ICs used in the 2230