DM502

Manuals – Specifications – Links – Pictures

The Tektronix DM502 is a basic 3½ digit digital multimeter plug-in for the TM500 system.

It has an Int/Ext switch that allows alternate input connections via the rear interface to be selected.

The DM502 is available with an input for temperature measurement with a transistor temperature probe (P6430) using an NPN transistor, e.g. a 2N2484 (any NPN-Transistor with h_FE >150 can be used).

The DM502A model adds an input for a PT-100 temperature probe (P6601), a True RMS converter, and offset circuits to read dB directly in all ranges. An "Option 2" instrument deletes the temperature measurement function, P6601 temperature probe, and all internal circuits associated with this function. The rear interface of DM502A is limited compared to the DM502: No current input and no reading output, see gallery below.

The 2 kΩ measurement range (+HI in DM502A) can be used for diode testing, since a current source of 1 mA is active and the reading corresponds to the (forward) voltage drop of the diode in Volts. The voltage can rise to a maximum of 10 V. A second voltmeter is needed to measure the voltage if 2 V are exceeded.

Key Specifications

Voltage ranges	200 mV to 200 V in decade steps; 1 kV (DC) / 500 V (AC) top range
Input impedance DM502	10 MΩ or direct JFET input >2 GΩ (by internal jumper)
Input impedance DM502A	10 MΩ
Current ranges	200 μA to 2 A in decade steps
Resistance ranges	200 Ω to 20 MΩ in decade steps

Links

• Tektronix DM502 Multimeter Repair by NFM @ YouTube
• Tektronix DM502A The final Restoration by Zenwizard Studios @ YouTube
• Tektronix DM502A Lab Check In and Calibration by Zenwizard Studios @ YouTube

Pictures

DM502

• 
• 
• 
• 

  DM502 switch with cover off. The cover removes easily using a Pozidrive screwdriver.

• 
• 
• 
• 
• 
• 

  DM502 rear interface

DM502A

• 
• 
• 
• 

  DM502A right internal

• 

  DM502A rear interface