DC504: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 25: | Line 25: | ||
{| | {| | ||
|- | |- | ||
| 28B − Gate Out, Totalize Start/Stop | | 28B − Gate Out, Totalize Start/Stop || 28A − Hold | ||
|- | |- | ||
| 27B − Decimal point | | 27B − Decimal point || | ||
|- | |- | ||
| | | || 26A − /Reset | ||
|- | |- | ||
| | | || 25A − TS1 (digit select 1, MSD) | ||
|- | |- | ||
| 24B − Scan clock out || 24A − TS2 (digit select 2) | | 24B − Scan clock out || 24A − TS2 (digit select 2) | ||
|- | |- | ||
| 23B − Overflow || 23A − TS3 (digit select 3) | | 23B − Overflow || 23A − TS3 (digit select 3) | ||
|- | |- | ||
| 22A − TS4 (digit select 4) || | | 22A − TS4 (digit select 4) || | ||
|- | |- | ||
| 21B − BCD out 2 || 21A − TS5 (digit select 5, LSD) | | 21B − BCD out 2 || 21A − TS5 (digit select 5, LSD) | ||
|- | |- | ||
| 20B − BCD out 8 | | 20B − BCD out 8 || 20A − BCD out 4 | ||
|- | |- | ||
| 19B − Latch Out (Data Good) | | 19B − Latch Out (Data Good) || 19A − BCD out 1 | ||
|- | |- | ||
| | | || 17A – Signal Input GND | ||
|- | |- | ||
| | | || 16A − Signal input | ||
|- | |- | ||
| | | || 15A – External Clock GND | ||
|- | |- | ||
| | | || 14A − External Clock (GND on 15A) | ||
|} | |} | ||
</small> | </small> |
Revision as of 04:05, 1 December 2023
The Tektronix DC504 is a 80 MHz, 5-digit frequency counter plug-in for the TM500 system.
It was superseded by the DC504A in 1984.
Key Specifications
Frequency Range | DC (AC coupled: 10 Hz) to at least 80 MHz |
---|---|
Sensitivity | 20 mVRMS sine wave below 15 MHz, 35 mVRMS to 50 MHz, derated down to 175 mVRMS at 80 MHz |
Input impedance | 1 MΩ // 20 pF |
Trigger Level Range | −1.5 V to +1.5 V |
Frequency Resolution | kHz ranges: 0.1 Hz; 1 Hz and 10 Hz (7 digit resolution possible in overflow kHz position); MHz ranges: 100 Hz, 1 kHz (9 digit resolution possible in overflow kHz position) |
Period resolution | ms ranges: 1 µs, 10 µs; s ranges: 10 ms, 1 ms, 0.1 ms |
Display Time | Variable ~0.1 s ... ~10 s and HOLD mode |
Standard Time Base | 1 MHz, ±1×10-5 from 0°C to +50°C, ±1×10-5 per month, Adjustable to within 1×10-7 |
Opt. 1 Time Base | 5 MHz, ±1×10-7 from 0°C to +50°C, ±1×10-7 per month, Adjustable to within 1×10-9 |
An internal "RPM" mode switch stretches gate times sixfold, giving a longest gate time of 1 minute with a display scaled in revolutions per minute.
Links
Documents Referencing DC504
Rear Interface
28B − Gate Out, Totalize Start/Stop | 28A − Hold |
27B − Decimal point | |
26A − /Reset | |
25A − TS1 (digit select 1, MSD) | |
24B − Scan clock out | 24A − TS2 (digit select 2) |
23B − Overflow | 23A − TS3 (digit select 3) |
22A − TS4 (digit select 4) | |
21B − BCD out 2 | 21A − TS5 (digit select 5, LSD) |
20B − BCD out 8 | 20A − BCD out 4 |
19B − Latch Out (Data Good) | 19A − BCD out 1 |
17A – Signal Input GND | |
16A − Signal input | |
15A – External Clock GND | |
14A − External Clock (GND on 15A) |
Internals
The DC504 uses a Mostek MK5009P PMOS oscillator/counter IC to control gate times. The first counter stage is a Signetics 82S90 85(100) MHz decade counter, followed by four 7490 decade counters, 7475 latches, and 7401s to multiplex the output/display.
Pictures
-
DC504
-
DC504
-
DC504
-
DC504
-
DC504
-
DC504
-
DC504 inside; component side
-
DC504 inside; copper side
Components
Some Parts Used in the DC504
Part | Part Number(s) | Class | Description | Used in |
---|---|---|---|---|
2N4249 | 151-0342-00 | Discrete component | PNP Si low noise amp. | DC501 • DC502 • DC503 • DC503A • DC504 • DC504A • DC505 • DC505A • DC508 • DC508A • DC509 • DC510 |
2N4851 | 151-0504-00 • 151-0504-01 | Discrete component | silicon unijunction transistor | DC501 • DC502 • DC503 • DC503A • DC504 • DC505 • DC505A • DC508 • DC508A • LA501 • R1330 • 212 • 214 • 4002A • 4623 • 4631 • 4632 • 4633A • 4634 • 4701 • 4701R • 670-0696-01 • 670-1274-00 • 670-1981-00 • 670-1981-01 • 7D01 • 7D12 • 7L12 |
Mostek MK5009 | 156-0410-00 | Monolithic integrated circuit | oscillator/counter | DC504 |
Signetics 82S90 | 156-0482-01 | Monolithic integrated circuit | 85(100) MHz decade counter | DC504 |