O: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
(48 intermediate revisions by 5 users not shown)
Line 1: Line 1:
The Type O is a [[letter-series and 1-series plug-ins|letter-series plug-in]] that contains two op-amps.
{{Plugin Sidebar
The input and feedback networks of the op-amps can be configured from the front panel using knobs
|manufacturer=Tektronix
and/or user-supplied components. There are sockets on the front panel for banana plugs.
|series=500-series scopes
Type O also has a regular signal input that does not involve the op-amps. 
|type=Type O
A mode switch selects which op-amp's output will be displayed, or the regular signal input.
|summary=Dual opamp plugin
|image=Tek Type O front.jpg
|caption=Type O front view
|introduced=1962
|discontinued=1974
|designers=Hiro Moriyasu
|manuals=
* [[Media:070-323.pdf|Tektronix Type O Manual]]
* [[Media:Tek type o preliminary.pdf|Tektronix Type O Preliminary Manual]]
* [[Media:Tek type o irb.pdf|Tektronix Type O Instrument Reference Book]] (OCR)


Regular signal bandwidth is 25MHz, maximum sensitivity is 50mV/div,
'''Applications'''
op-amp gain-bandwidth product is 15MHz, and open-loop DC gain is 2500.
* [[Media:tek_opamps_apps.pdf|Tektronix Opamps and Their Applications]] (bad-OCR)


Type O was [[introduced in 1962|introduced in mid-1962]] and it was
'''Calibration'''
"in at the finish", available right up to the discontinuance of the entire classic plug-in scope line in 1974.
* [[Media:tek_type_o_fcp.pdf|Tektronix Type O Factory Calibration Procedure]] (bad-OCR)
* [[Media:Tek type o fcp oct 1967.pdf|Tektronix Type O Factory Calibration Procedure Oct 1967]]
* [[Media:Tek type o cal outline.pdf|Tektronix Type O Calibration Outline]] (OCR)


The Type O can be used with any of the following adapters:
'''Alternate copies'''
[[013-081]], [[013-068]], [[013-0048-01]], [[013-0049-01]], [[013-0086-00]], [[013-0067-00]] (manual below).
* [https://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual] (DJVU @ BAMA)


* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (BAMA)]
'''Catalogs'''
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)]
* [[Media:tektronix_type_o_1968_cat.pdf|Tektronix Type O in 1968 Catalog]]
* [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)]
* [[Media:A-2078-3.pdf|Type O Brochure (PDF)]]
* [http://w140.com/013-067_Log_adapter.pdf Tektronix 013-067 Log Adapter Manual (PDF)]
</small>
* [http://w140.com/tek_opamps_and_applications.pdf Tektronix Opamps and Their Applications (PDF)]
}}
The '''Tektronix Type O''' is a [[letter-series and 1-series plug-ins|letter-series plug-in]], designed by [[Hiro Moriyasu]], that contains two operational amplifiers and a vertical amplifier.
It was [[introduced in 1962|introduced in mid-1962]] and was available through 1973.
 
The input and feedback networks of the operational amplifiers can be configured from the front panel switches and/or by way of user-supplied components plugged into the front panel banana jacks.
Tektronix made several pre-configured plug-in modules to plug directly into those jacks.
See the ''Accessories'' section below.
Note that one of the accessories is an empty box with mating banana plugs for a user-designed circuit.
 
A mode switch selects the display to be taken from either op-amp's output, or the vertical amplifier input.
 
{{BeginSpecs}}
{{Spec | Bandwidth    | DC to 25 MHz (Vertical amplifier<sup>1</sup>) }}
{{Spec | Rise time    | 14 ns (Vertical amplifier <sup>1</sup>) }}
{{Spec | Deflection    | 50 mV/div to 10 V/div, 1–2–5, and variable (Vertical amplifier) }}
{{Spec | Input        | 1 MΩ // 47 pF (Vertical amplifier) }}
{{Spec | Op-Amp GBW    | 15 MHz }}
{{Spec | Op-Amp gain  | 2500 }}
{{Spec | Op-Amp output | ±50 V, ±5 mA; output impedance 30 Ω @ 1 MHz }}
{{Spec | Op-Amp noise  | typ. 0.5 mV<sub>p-p</sub> referred to the input }}
{{Spec | Internal Z    | input and feedback can be selected from 10 kΩ, 100 kΩ, 200 kΩ, 500 kΩ, 1 MΩ<br>or 10 pF to 1 μF in decade steps }}
{{EndSpecs}}
''Note 1: In 540- and 580-series scopes and 555''
<small>
 
===Accessories===
{{2ColBegin}}
* [[013-0049-01]] Standard Shielded Cover (two supplied with each plugin)
* [[013-0048-01]] Terminal Adapter Assembly (empty box for user chosen components)
* [[013-0081-00]] Compensating Adapter
* [[013-0068-00]] Gating Adapter
* [[013-0086-00]] Leakage Current Adapter
* [[013-0067-00]] Logarithmic Amplifier Adapter
* [[067-0507-00]] Grid Current Checker (calibration fixture)
{{2ColEnd}}
</small>
 
==Prices==
* $625 in 1971 ($4,700 in 2023 dollars)
 
==Internals==
The opamps are implemented using two [[12AU6]] as a differential pair followed by two systems of a [[6DJ8]] as a bootstrapped cathode follower.
 
The vertical amplifier also starts with a 12AU6 differential pair, which is followed by a pair of [[2N1143]] 200 MHz transistors.
 
==Pictures==
<gallery>
Tek Type O front.jpg      | Front view
Tek_Type_O_front_Peter.jpg | Front view
Type_o_top.jpg            | Top view
Type_o_right.jpg          | Right view
Type_o_left.jpg            | Left view
Type-o.jpg
Tek type o adp1.JPG
Tek type o adp2.JPG
Tek o fr1.jpg
Tek o fr2.jpg
Tek o fr3.jpg
Tek o fr4.jpg
Tek o fr5.jpg
Tek o fr6.jpg
Preproduction type O.jpg|pre-production Type O
</gallery>
 
'''Schematics'''
<gallery>
<gallery>
Image:Type_o_front.jpg|Front view.
Tek type o schem.png|Opamp Schematic
Image:Type_o_top.jpg|Top view.
Tek type o preamp.png|Preamp Schematic
Image:Type_o_right.jpg|Right view.
Image:Type_o_left.jpg|Left view.
File:Tek type o adp1.JPG
File:Tek type o adp2.JPG
</gallery>
</gallery>
==Components==
{{Parts|O}}
[[Category:500 series plugins]]

Latest revision as of 13:35, 28 June 2024

Tektronix Type O
Dual opamp plugin
Type O front view

Compatible with 500-series scopes

Produced from 1962 to 1974

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type O is a letter-series plug-in, designed by Hiro Moriyasu, that contains two operational amplifiers and a vertical amplifier. It was introduced in mid-1962 and was available through 1973.

The input and feedback networks of the operational amplifiers can be configured from the front panel switches and/or by way of user-supplied components plugged into the front panel banana jacks. Tektronix made several pre-configured plug-in modules to plug directly into those jacks. See the Accessories section below. Note that one of the accessories is an empty box with mating banana plugs for a user-designed circuit.

A mode switch selects the display to be taken from either op-amp's output, or the vertical amplifier input.

Key Specifications

Bandwidth DC to 25 MHz (Vertical amplifier1)
Rise time 14 ns (Vertical amplifier 1)
Deflection 50 mV/div to 10 V/div, 1–2–5, and variable (Vertical amplifier)
Input 1 MΩ // 47 pF (Vertical amplifier)
Op-Amp GBW 15 MHz
Op-Amp gain 2500
Op-Amp output ±50 V, ±5 mA; output impedance 30 Ω @ 1 MHz
Op-Amp noise typ. 0.5 mVp-p referred to the input
Internal Z input and feedback can be selected from 10 kΩ, 100 kΩ, 200 kΩ, 500 kΩ, 1 MΩ
or 10 pF to 1 μF in decade steps

Note 1: In 540- and 580-series scopes and 555

Accessories

Prices

  • $625 in 1971 ($4,700 in 2023 dollars)

Internals

The opamps are implemented using two 12AU6 as a differential pair followed by two systems of a 6DJ8 as a bootstrapped cathode follower.

The vertical amplifier also starts with a 12AU6 differential pair, which is followed by a pair of 2N1143 200 MHz transistors.

Pictures

  • Front view

    Front view

  • Front view

    Front view

  • Top view

    Top view

  • Right view

    Right view

  • Left view

    Left view

  • pre-production Type O

    pre-production Type O

Schematics

  • Opamp Schematic

    Opamp Schematic

  • Preamp Schematic

    Preamp Schematic

Components

Some Parts Used in the O

Part Part Number(s) Class Description Used in
12AU6 154-0040-00 Vacuum Tube (Pentode) RF pentode 81 • 112 • 1L10 • 1L20 • 1L60 • 3L10 • 512 • 556 • 575 • 545 • 547 • 549 • 581 • 585 • A • B • C • G • K • H • L • ML • M • N • O • R • S • Z
6DJ8 154-0187-00 • 154-0305-00 Vacuum Tube (Dual Triode) dual triode 067-506 • 111 • 132 • 161 • 310A • 316 • 317 • 502 • 502A • 503 • 504 • 506 • 515 • 516 • 519 • 526 • 529 • RM529 • 533 • 535 • 536 • 543 • 544 • 545 • 545A • 545B • 546 • 547 • 549 • 555 • 556 • 561A • 561S • 564 • 565 • 567 • 581 • 581A • 585 • 585A • 661 • 1A4 • 1S1 • 60 • 2A60 • 63 • 2A63 • 67 • 2B67 • 3A1 • 3A1S • 3A2 • 3A3 • 3A6 • 3A7 • 72 • 3A72 • 75 • 3A75 • 4S2 • 51 • 3B1 • 3B1S • 3B2 • 3B3 • 3B4 • 3M1 • 3S76 • 3T77 • 3T77A • 9A1 • 9A2 • 1121 • 80 • 81 • 82 • 86 • B • O • W • Z • Telequipment D56 • Telequipment S32A • Telequipment D52 • S-311 • Telequipment TD51 • Telequipment S52 • Telequipment S51 • Telequipment Type A • TU-4
8426 Vacuum Tube (Pentode) RF pentode O • 545A • 547 • 549 • 581A • 585A
Retrieved from "https://w140.com/tekwiki/index.php?title=O&oldid=94932"