Microprocessor support table: Difference between revisions

Latest revision as of 14:45, 3 October 2024

These tables describe the configurations necessary for specific microprocessors on Tektronix logic analyzers.
Those analyzers not providing any specific target support (i.e. connection, disassembly) are listed as a matter of chronology and convenience for the reader.

"N/A" means that the option is not applicable; "?" means that no information has been found to date.

"Max" means that it supports the maximum speed for the processor.

Tektronix 7D01

Introduced 1977
No microprocessor support.

Sony/Tektronix 308 Data Analyzer

Introduced 1980
No microprocessor support

Tektronix 7D02

Note:

The PM101 is a general purpose probe, it can be defined to work with processors not listed here.
"FM" stands for Full mnemonic disassembly.
"STD" stands for Standard radices (Hex, Bin, Octal).
In production 1981-1984.

Microprocessor	Support Feature	Probe adapter	Requires	Fastest clock supported
	Tektronix 7D02
Intel
8031	STD	PM101	061-6003-00 Application manual	20 MHz
8035	STD	PM101	061-5999-00 Application manual	20 MHz
8039	STD	PM101	061-5999-00 Application manual	20 MHz
8048	STD	PM101	061-5999-00 Application manual	20 MHz
8049	STD	PM101	061-5999-00 Application manual	20 MHz
8051	STD	PM101	061-6003-00 Application manual	20 MHz
8080	FM	PM101	PM101 Opt 01	20 MHz
8085	FM	PM104	X	10 MHz
8086	FM	PM106	X	8 MHz
8088	FM	PM107	X	5 MHz
8748	STD	PM101	061-5999-00 Application manual	20 MHz
8751	STD	PM101	061-6003-00 Application manual	20 MHz
Motorola
6800	FM	PM102	X	2 MHz
6801	STD	PM101	061-6000-00 Application manual	20 MHz
6802	FM	PM103	X	6 MHz
6803	STD	PM101	061-6000-00 Application manual	20 MHz
6808	FM	PM103	X	6 MHz
6809	FM	PM111	X	8 MHz
6809E	FM	PM111	X	8 MHz
68000	FM	PM109	X	10 MHz
Zilog
Z-80	FM	PM105	X	6 MHz
Z8001	FM	PM110	X	6 MHz
Z8002	FM	PM108	X	4 MHz
Texas Instruments
TMS9900	STD	PM101	061-6002-00 Application manual	20 MHz
Other microproscessor
1802	STD	PM101	061-6001-00 Application manual	20 MHz
6502	FM	PM101	PM101 Opt 02	20 MHz
Other
MULTIBUS	STD	PM112	X	5 MHz

Tektronix DAS9100

See 91TMXX tapes for information on tapes. Note:

In catalog 1982-1989
All acquisition boards are either 91A24 or 91AE24.
If the UPIK 40 harness is listed it means that it is supported, but not required.
(*1) means that P6460 probes are always required.
(*2) means that P6460 probes are required for CMOS version.
(*3) means that P6460 or P6462 probes can be used.
PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.

It is also possible for the user to create mnemonics tables, using the Mnemonics menu.

DAS 9100 Operator's Manual Section 7 update (PDF, OCR)

Microprocessor	IC package	Mnemonic tape	Probe adapter	Acq.Boards required	Acq.Probes required	Fastest clock supported
	Tektronix DAS9100
Intel
8080		91TM01	X	2	4*3	Max
8031		91TM07	X	2	4*1	Max
8039		91TM10	X	1	3*1	Max
8085		91TM02	X	2	4*3	Max
8086	DIP	91TM03	PM201	2	X	10 MHz
8088	DIP	91TM04	PM201	2	X	10 MHz
80186	LCC	91TM05	PM202	2	X	10 MHz
80188	LCC	91TM06	PM202	2	X	10 MHz
Motorola
6800		91TM21	X	2	4*3	Max
6801		91TM28	X	2	4*3	Max
6802		91TM22	X	2	4*3	Max
6803		91TM29	X	2	4*3	Max
6805		91TM30	UPIK 40	2	4*2	Max
6808		91TM23	X	2	4*3	Max
6809		91TM24	X	2	4*3	Max
68121		91TM32	X	2	4*3	Max
68000	DIP	91TM25	PM203	2	None	12.5 MHz
68000	PGA	91TM25	PM203	2	None	12.5 MHz
68008	DIP	91TM26	PM203	2	None	8 MHz
68010	DIP	91TM27	PM203	2	None	12.5 MHz
68010	PGA	91TM27	PM203	2	None	12.5 MHz
Zilog
Z-80		91TM41	X	2	4*1	Max
Z8001/3		91TM42	X	3	4*3	Max
Z8002/4		91TM43	X	3	3*3	Max
Other microprocessors
6502/C02		91TM63	X	2	4*2	Max
1802		91TM61	X	2	4*2	Max
1803		91TM65	X	2	4*2	Max
F9450		91TM62	X	2	3*3	Max
MIL-Std 1705A		91TM64	X	2	N/A	N/A
NSC800		91TM71	X	2	4*1	Max
BUS
UNIBUS		91TM51	X	2	4*3	Max
Q-BUS		91TM52	X	2	4*3	Max
QPIB		91TM53	X	1	3*3	Max
ASCII		91TM53	X	1	3*3	Max
EBCDIC		91TM53	X	1	3*3	Max

The following table gives the configuration for the PMA 100 Personality Module Adapter, which is an interface that connects PM1XX personality modules to the DAS9100.

FM stands for full mnemonic disassembly.
CM stands for control mnemonics.
STD stands for standard radices (hex, binary, octal).
DM means that the mnemonics may be developed using DAS mnemonics.

Microprocessor	Support Feature	Probe adapter	Requires	Fastest clock supported
	DAS9100 with PMA 100
Intel
8031	STD, DM	PM101	061-6003-00 Application manual	?
8035	STD, DM	PM101	061-5999-00 Application manual	?
8039	STD, DM	PM101	061-5999-00 Application manual	?
8048	STD, DM	PM101	061-5999-00 Application manual	?
8049	STD, DM	PM101	061-5999-00 Application manual	?
8051	STD, DM	PM101	061-6003-00 Application manual	?
8080	FM, DM	PM101	PM101 Opt 01	?
8085	FM, DM	PM104	X	10 MHz
8086	FM, DM	PM106	X	8 MHz
8088	FM, DM	PM107	X	5 MHz
8748	STD, DM	PM101	061-5999-00 Application manual	?
8751	STD, DM	PM101	061-6003-00 Application manual	?
Motorola
6800	FM, DM	PM102	X	2 MHz
6801	STD, DM	PM101	061-6000-00 Application manual	?
6802	FM, DM	PM103	X	6 MHz
6803	STD, DM	PM101	061-6000-00 Application manual	?
6808	FM, DM	PM103	X	6 MHz
6809	FM, DM	PM111	X	8 MHz
6809E	FM, DM	PM111	X	8 MHz
68000	FM, DM	PM109	X	10 MHz
Zilog
Z80	FM, DM	PM105	X	6 MHz
Z8001	FM, DM	PM110	X	6 MHz
Z8002	FM, DM	PM108	X	4 MHz
Texas Instruments
TMS9900	STD, DM	PM101	061-6002-00 Application manual	?
Other microproscessor
1802	STD, DM	PM101	061-6001-00 Application manual	?
6502	FM, DM	PM101	PM101 Opt 02	?
BUS
MULTIBUS	CM, STD, DM	PM112	X	?

Tektronix 1240/1241

In catalog 1984-1990
All acquisition boards are the 18-channel 1240D2. The 9-channel 1240D1 cannot be used.
If the UPIK 40 harness is listed it means that it is supported, but not required.
(*1) means that P6460 probes are always required.
(*2) means that P6460 probes are required for CMOS version.
(*3) means that P6460 or P6462 probes can be used.
PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
There is a design for a multipurpose RAM/ROM pack, called SuperPack by Pavel Korensky. Note the errata in the README file.
ROM Pack designations remain confusing. Not only do they use two conventions - "12RMXX" and "12RM99 Option XX" - but there is overlap and conflict between those for 8-bit CPUs and those for 16-bit CPUs e.g. 12RM01 appears to refer to both 8080 and 8086 support (see: Tektronix 1987 catalog p.121).

Microprocessor	IC package	ROM pack	Probe adapter	Acq. boards required	Acq. probes required	Fastest clock supported
	Tektronix 1240/1241 ROM pack and configuration table
Intel
8080		12RM01	N/A	2	4X P6460	Max
8031/8051		12RM99 Opt 03	UPIK 40	2	4X P6460	12 MHz
8085		12RM02	N/A	2	4X P6460 or P6462	Max
8086	DIP	12RM03	PM201	3	N/A	8.0 MHz
8088	DIP	12RM04	PM201	3	N/A	8.0 MHz
80186	LCC/PGA	12RM05	PM202	3	N/A	8.0 MHz
80188	LCC/PGA	12RM06	PM202	3	N/A	8.0 MHz
80286	LCC/PGA	12RM08	PM204	3	N/A	10.0 MHz
8096/7		12RM99 Opt 16	N/A	3	6X P6460	12 MHz
Motorola
6800		12RM21	N/A	2	4X P6460 or P6462	Max
6801		12RM99 Opt 05	UPIK 40	2	4X P6460 or P6462	Max
6802		12RM22	N/A	2	4X P6460 or P6462	Max
6805(E2)		12RM99 Opt 06	UPIK 40	2	2X P6460	Max
6805(E3)		12RM99 Opt 07	UPIK 40	2	3X P6460	Max
6808		12RM23	N/A	2	4X P6460 or P6462	Max
6809		12RM24	X	2	4X P6460 or P6462	Max
6809E		12RM24	N/A	2	4X P6460 or P6462	Max
68HC11		12RM99 Opt 08	N/A	2	3X P6460	Max
68000	DIP	12RM25	PM203	3	N/A	16 MHz
68000	PGA	12RM25	PM203	3	N/A	16 MHz
68008	DIP	12RM26	PM203	3	N/A	16 MHz
68010	DIP	12RM27	PM203	3	N/A	16 MHz
68010	PGA	12RM27	PM203	3	N/A	16 MHz
68020		12RM31	PM205	3	N/A	25.0 MHz
68030		12RM33	?	3	N/A	25.0 MHz
DSP56000/1		12RM99 Opt 17	N/A	3	6X P6460	50 MHz
Zilog
Z-80		12RM41	N/A	2	4X P6460	8 MHz
Z-80		12RM07	N/A	2	4X P6460	8 MHz
Z8001/3		12RM42	N/A	3	4X P6460 or P6462	10 MHz
Z8002/4		12RM43	N/A	3	3*3	10 MHz
Texas Instruments
TMS320320/320C25		12RM99 Opt 11	N/A	3	5X P6460	20 MHz
TMS32010		12RM99 Opt 14	UPIK 40	2	4X P6460	Max
Hitachi
6301/3		12RM99 Opt 09	UPIK 40	2	4X P6460 or P6462	Max
64180R0/R1		12RM99 Opt 12	N/A	3	5X P6460	Max
Other microprocessors
6502		12RM63	N/A	2	4*2	Max
65C02		12RM63	N/A	2	4*2	Max
RCA 1802/4/5/6/(A/C/AC/BC)		12RM99 Opt 22	UPIK 40	2	3X P6460	Max
Analog Devices ADSP2100		12RM99 Opt 17	N/A	3	6X P6460	Max
Fairchild F9450		12RM62A	N/A	3	3*3	40 MHz
MIL-Std 1705A		?	?	?	?	40 MHz
National Semiconductor NSC800		12RM71	N/A	2	4X P6460	Max
National Semiconductor NSC800		12RM09	N/A	2	4X P6460	Max
GM EMC		12RM99 Opt 01	UPIK 40	2	4X P6460 or P6462	Max
Other
VAXBI		12RM99 Opt 13	012-1164-00	3	6*3	Max
GPIB		12RM99 Opt 04	103-0209-00	2	2*3	Max

Tektronix DAS9200

Introduced 1987
(*1) 92A60 or 92A90 pobes can be used.
(*2) Only 92A90 probes can be used.
See the 1993 Tektronix catalog page 155-157 for the full list

Microprocessor	IC package	Software	Probe adapter	Probe required	Fastest clock supported
	Tetkronix DAS9200
Intel
8085		92DM02	92DM02	*1	Max
8086	DIP	92DM03	92DM03	*1	Max
8088	DIP	92DM04	92DM04	*1	Max
80186	LCC/PGA	92DM05	92DM05	*1	Max
80188	LCC/PGA	92DM06	92DM06	*1	Max
80286	LCC/PGA	92DM08	92DM08	*1	Max
80386		92DM09	92DM09	*2	Max
Motorola
6809		92DM24	92DM24	*1	Max
6809E		92DM24	92DM24	NA	Max
68000	DIP	92DM25, or 92DM27	92DM25, or 92DM27	*1	Max
68000	PGA	91TM27	?	*1	Max
68010	DIP	92DM27	92DM27	*1	Max
68010	PGA	91TM27	?	*1	Max
68020		92DM31	92DM31	*2	Max
68030		92DM33	92DM33	?	?
68040		?	?	?	?
Zilog
Z-80		92DM41	92DM41	*1	Max
Other microprocessors
F9450		92DM64	Use 92DM64 with option 13 for non-MMU, else use without.	*1	Max
1705A		92DM64	Need adapter for emulator PIAs	*1	40 MHz

Tektronix 1225/1220

In catalog 1988
Note that the configuration table for the 1230 is not the same as the one for the 1240/1241.

The internal hardware is different enough that the 1225/1220 can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.

Microprocessor	Probe adapter	Fastest clock supported
	Tektronix 1225/1220
Intel
8085	PM404	Max
8086	PM411
8088	PM411
Motorola
6800	PM407
6802	PM407
6809	PM406	Max
6809E	PM406	Max
68000	PM412
Zilog
Z80	PM402	Max
Other Microprocessor
6502/C02	PM403	Max
Other
STD	PM405	Max

Tektronix 1205

In catalog 1988-1989

Microprocessor	Probe adapter	Acq. boards required	Acq. probes required	Fastest clock supported
	Tektronix 1205
Zilog
Z80	PM302	X	None	4 MHz
Other
6502/C02	PM303	X	None	4 MHz
General	PM301	X	None	4 MHz

Tektronix 1230

In catalog 1989-1993
The 1230DPA is required for all DPXXXX probes.
All acquisition boards are 1230E1.
All of the needed software is included with the personality module.

Note from operators manual:

DISASSEMBLY DISPLAY
Microprocessor disassembly is an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it. Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in the operator's manual for each microprocessor disassembly probe.

Microprocessor	IC package	Probe adapter	Acq. boards required	Acq. probes required	Fastest clock supported
	Tektronix 1230
Intel
8031/8051	DIP	DP8031D	2	None	12 MHz
8085	DIP	PM404	2	None	6 MHz
8086	DIP	PM411,DP8086D	3	None	10 MHz
8087	DIP	DP8031D DP8086D	?	None	?
8088	DIP	PM411,DP8086D	3	None	10 MHz
80186	PGA	DP186P	3	None	10 MHz
80188	PGA	DP186P	3	None	10 MHz
8096/7	PLCC	DP96PL	3	None	12 MHz
80C196	PLCC	DP96PL	3	None	12 MHz
80286	PGA	DP286PL	3	None	12.5 MHz
80287	PGA	DP286PL	3	None	12.5 MHz
80286	PLCC	DP286P	3	None	12.5 MHz
80287	PLCC	DP286P	3	None	12.5 MHz
80386SX	PQFP	DP386SX	3	None	16 MHz
80387SX	PQFP	DP386SX	3	None	16 MHz
Motorola
6800	DIP	PM407	2	None	Max
6802	DIP	PM407	2	None	Max
6809	DIP	PM406	2	None	2 MHz
6809E	DIP	PM406	2	None	2 MHz
68HC11	All	DPHC11Q	2	None	12 MHz
68000	DIP	PM412,DP68KD	3	None	16 MHz
68000	PGA	DP68KP	3	None	16 MHz
68010	DIP	DP68KD	3	None	16 MHz
68010	PGA	DP68KP	3	None	16 MHz
Zilog
Z-80	DIP	PM402	2	None	Max
Other Microprocessors
6502/C02	DIP	PM403	2	None	Max
Other
STD		PM405	2	None	12.5 MHz
GPIB		DPGPIB	Any	None	10 MHz
RS-232		A6740G	Any	None	19.2 K baud

Tektronix Prism 3002

Introduced 1990

Tektronix 3001 GPX

Introduced 1993
To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM.

Tektronix TLA 700

Introduced 1997-1998

@@ Line 1: / Line 1: @@
-<!--IN PROGRESS!-->
+These tables describe the configurations necessary for specific microprocessors on Tektronix logic analyzers.<br>
-This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.
+Those analyzers not providing any specific target support (i.e. connection, disassembly) are listed as a matter of chronology and convenience for the reader.
-A "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.
+"N/A" means that the option is not applicable; "?" means that no information has been found to date.
-"Max" means that it supports the maximum speed fro the processor.
+"Max" means that it supports the maximum speed for the processor.
-==Tektronix [[1240]]/[[1241]]==
+==Tektronix [[7D01]]==
+*Introduced 1977
+*No microprocessor support.
+==Sony/Tektronix [[308]] Data Analyzer==
+*Introduced 1980
+*No microprocessor support
+==Tektronix [[7D02]]==
+Note:
+* The [[PM101]] is a general purpose probe, it can be defined to work with processors not listed here.
+* "FM" stands for Full mnemonic disassembly.
+* "STD" stands for Standard radices (Hex, Bin, Octal).
+* In production 1981-1984.
+{| class="wikitable"
+|[[File:Tektronix_7D02.jpg|140px|]]
+! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tektronix [[7D02]]
+|-
+! Microprocessor
+! Support Feature
+! Probe adapter
+! Requires
+! Fastest clock supported
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
+|-
+| 8031
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8035
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8039
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8048
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8049
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8051
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8080
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | PM101 Opt 01
+| style="text-align: center;" | 20 MHz
+|-
+| 8085
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM104]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| 8086
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM106]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 8 MHz
+|-
+| 8088
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM107]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 5 MHz
+|-
+| 8748
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 8751
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
+|-
+| 6800
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM102]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2 MHz
+|-
+| 6801
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 6802
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM103]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| 6803
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 6808
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM103]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| 6809
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM111]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 8 MHz
+|-
+| 6809E
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM111]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 8 MHz
+|-
+| 68000
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM109]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z-80
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM105]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| Z8001
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM110]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| Z8002
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM108]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 4 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
+|-
+| TMS9900
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6002-00.pdf|061-6002-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
+|-
+| 1802
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[Media:061-6001-00.pdf|061-6001-00]] Application manual
+| style="text-align: center;" | 20 MHz
+|-
+| 6502
+| style="text-align: center;" | FM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | PM101 Opt 02
+| style="text-align: center;" | 20 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Other
+|-
+| MULTIBUS
+| style="text-align: center;" | STD
+| style="text-align: center;" | [[PM112]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 5 MHz
+|}
+==Tektronix [[DAS9100]]==
+See [[91TMXX tapes]] for information on tapes.
 Note:
-*All acquisition boards are [[1240D2]] the [[1240D1]] cannot be used.
+*In catalog 1982-1989
+*All acquisition boards are either [[91A24]] or [[91AE24]].
 *If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
 *(*1) means that [[P6460]] probes are always required.
 *(*2) means that [[P6460]] probes are required for CMOS version.
 *(*3) means that [[P6460]] or [[P6462]] probes can be used.
+*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
+It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
+* [[Media:DAS_9100_Series_Operators_Section_7_update.pdf|DAS 9100 Operator's Manual Section 7 update (PDF, OCR)]]
+<!--Page 52 of 1982 catalogue-->
+<!--Page 63 of 1983 catalogue-->
+<!--Page 83 of 1984 catalogue-->
+<!--Page 126 of 1987 catalogue-->
+{| class="wikitable"
 {| class="wikitable"
-! colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
+|[[File:DAS9100.jpg|140px|]]
+! colspan="7" style="text-align: center; background-color:#efefef;" | Tektronix [[DAS9100]]
 |-
-| style="text-decoration:underline;" | Micro- Processor
+! Microprocessor
-| style="text-decoration:underline;" | IC package
+! IC package
-| style="text-decoration:underline;" | ROM pack
+! Mnemonic tape
-| style="text-decoration:underline;" | Probe adapter
+! Probe adapter
-| style="text-decoration:underline;" | Acq. Boards required
+! Acq.Boards required
-| style="text-decoration:underline;" | Acq. Probes required
+! Acq.Probes required
-| style="text-decoration:underline;" | Fastest clock supported
+! Fastest clock supported
 |-
 | colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
@@ Line 27: / Line 241: @@
 | 8080
 |
-| style="text-align: center;" | [[12RM01]]
+| style="text-align: center;" | [[91TM01]]
 | style="text-align: center;" | X
 | style="text-align: center;" | 2
@@ Line 33: / Line 247: @@
 | style="text-align: center;" | Max
 |-
-| 8031/8051
+| 8031
 |
-| style="text-align: center;" | [[12RM99]] Opt 03
+| style="text-align: center;" | [[91TM07]]
-| style="text-align: center;" | [[UPIK 40]]
+| style="text-align: center;" | X
 | style="text-align: center;" | 2
 | style="text-align: center;" | 4*1
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | Max
+|-
+| 8039
+|
+| style="text-align: center;" | [[91TM10]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 1
+| style="text-align: center;" | 3*1
+| style="text-align: center;" | Max
 |-
 | 8085
 |
-| style="text-align: center;" | [[12RM02]]
+| style="text-align: center;" | [[91TM02]]
 | style="text-align: center;" | X
 | style="text-align: center;" | 2
@@ Line 51: / Line 273: @@
 | 8086
 | DIP
-| style="text-align: center;" | [[12RM03]]
+| style="text-align: center;" | [[91TM03]]
+| style="text-align: center;" | [[PM201]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| 8088
+| DIP
+| style="text-align: center;" | [[91TM04]]
 | style="text-align: center;" | [[PM201]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| 80186
+| LCC
+| style="text-align: center;" | [[91TM05]]
+| style="text-align: center;" | [[PM202]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| 80188
+| LCC
+| style="text-align: center;" | [[91TM06]]
+| style="text-align: center;" | [[PM202]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
+|-
+| 6800
+|
+| style="text-align: center;" | [[91TM21]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 6801
+|
+| style="text-align: center;" | [[91TM28]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 6802
+|
+| style="text-align: center;" | [[91TM22]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 6803
+|
+| style="text-align: center;" | [[91TM29]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 6805
+|
+| style="text-align: center;" | [[91TM30]]
+| style="text-align: center;" | [[UPIK 40]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*2
+| style="text-align: center;" | Max
+|-
+| 6808
+|
+| style="text-align: center;" | [[91TM23]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 6809
+|
+| style="text-align: center;" | [[91TM24]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 68121
+|
+| style="text-align: center;" | [[91TM32]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| 68000
+| DIP
+| style="text-align: center;" | [[91TM25]]
+| style="text-align: center;" | [[PM203]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | None
+| style="text-align: center;" | 12.5 MHz
+|-
+| 68000
+| PGA
+| style="text-align: center;" | [[91TM25]]
+| style="text-align: center;" | [[PM203]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | None
+| style="text-align: center;" | 12.5 MHz
+|-
+| 68008
+| DIP
+| style="text-align: center;" | [[91TM26]]
+| style="text-align: center;" | [[PM203]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | None
+| style="text-align: center;" | 8 MHz
+|-
+| 68010
+| DIP
+| style="text-align: center;" | [[91TM27]]
+| style="text-align: center;" | [[PM203]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | None
+| style="text-align: center;" | 12.5 MHz
+|-
+| 68010
+| PGA
+| style="text-align: center;" | [[91TM27]]
+| style="text-align: center;" | [[PM203]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | None
+| style="text-align: center;" | 12.5 MHz
+|-
+| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z-80
+|
+| style="text-align: center;" | [[91TM41]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*1
+| style="text-align: center;" | Max
+|-
+| Z8001/3
+|
+| style="text-align: center;" | [[91TM42]]
+| style="text-align: center;" | X
 | style="text-align: center;" | 3
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| Z8002/4
+|
+| style="text-align: center;" | [[91TM43]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 3
+| style="text-align: center;" | 3*3
+| style="text-align: center;" | Max
+|-
+| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
+|-
+| 6502/C02
+|
+| style="text-align: center;" | [[91TM63]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*2
+| style="text-align: center;" | Max
+|-
+| 1802
+|
+| style="text-align: center;" | [[91TM61]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*2
+| style="text-align: center;" | Max
+|-
+| 1803
+|
+| style="text-align: center;" | [[91TM65]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*2
+| style="text-align: center;" | Max
+|-
+| F9450
+|
+| style="text-align: center;" | [[91TM62]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 3*3
+| style="text-align: center;" | Max
+|-
+| MIL-Std 1705A
+|
+| style="text-align: center;" | [[91TM64]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | N/A
+| style="text-align: center;" | N/A
+|-
+| NSC800
+|
+| style="text-align: center;" | [[91TM71]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*1
+| style="text-align: center;" | Max
+|-
+| colspan="7" style="font-style:italic; background-color:#efefef;" | BUS
+|-
+| UNIBUS
+|
+| style="text-align: center;" | [[91TM51]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| Q-BUS
+|
+| style="text-align: center;" | [[91TM52]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*3
+| style="text-align: center;" | Max
+|-
+| QPIB
+|
+| style="text-align: center;" | [[91TM53]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 1
+| style="text-align: center;" | 3*3
+| style="text-align: center;" | Max
+|-
+| ASCII
+|
+| style="text-align: center;" | [[91TM53]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 1
+| style="text-align: center;" | 3*3
+| style="text-align: center;" | Max
+|-
+| EBCDIC
+|
+| style="text-align: center;" | [[91TM53]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 1
+| style="text-align: center;" | 3*3
+| style="text-align: center;" | Max
+|}
+The following table gives the configuration for the [[PMA 100]] Personality Module Adapter, which is an interface that connects PM1XX personality modules to the [[DAS9100]].
+* FM stands for full mnemonic disassembly.
+* CM stands for control mnemonics.
+* STD stands for standard radices (hex, binary, octal).
+* DM means that the mnemonics may be developed using DAS mnemonics.
+{| class="wikitable"
+|[[File:DAS9100.jpg|140px|]]
+! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | [[DAS9100]] with [[PMA 100]]
+|-
+! Microprocessor
+! Support Feature
+! Probe adapter
+! Requires
+! Fastest clock supported
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
+|-
+| 8031
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6003-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8035
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-5999-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8039
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-5999-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8048
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-5999-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8049
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-5999-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8051
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6003-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8080
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | PM101 Opt 01
+| style="text-align: center;" | ?
+|-
+| 8085
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM104]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| 8086
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM106]]
 | style="text-align: center;" | X
-| style="text-align: center;" | 8.0 Mhz
+| style="text-align: center;" | 8 MHz
 |-
 | 8088
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM107]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 5 MHz
+|-
+| 8748
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-5999-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 8751
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6003-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
+|-
+| 6800
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM102]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 2 MHz
+|-
+| 6801
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6000-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 6802
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM103]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| 6803
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6000-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 6808
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM103]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| 6809
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM111]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 8 MHz
+|-
+| 6809E
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM111]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 8 MHz
+|-
+| 68000
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM109]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 10 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z80
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM105]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| Z8001
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM110]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 6 MHz
+|-
+| Z8002
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM108]]
+| style="text-align: center;" | X
+| style="text-align: center;" | 4 MHz
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
+|-
+| TMS9900
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6002-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
+|-
+| 1802
+| style="text-align: center;" | STD, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | [[061-6001-00]] Application manual
+| style="text-align: center;" | ?
+|-
+| 6502
+| style="text-align: center;" | FM, DM
+| style="text-align: center;" | [[PM101]]
+| style="text-align: center;" | PM101 Opt 02
+| style="text-align: center;" | ?
+|-
+| colspan="5" style="font-style:italic; background-color:#efefef;" | BUS
+|-
+| MULTIBUS
+| style="text-align: center;" | CM, STD, DM
+| style="text-align: center;" | [[PM112]]
+| style="text-align: center;" | X
+| style="text-align: center;" | ?
+|}
+==Tektronix [[1240]]/[[1241]]==
+*In catalog 1984-1990
+*All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used.
+*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
+*(*1) means that [[P6460]] probes are always required.
+*(*2) means that [[P6460]] probes are required for CMOS version.
+*(*3) means that [[P6460]] or [[P6462]] probes can be used.
+*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
+*There is a design for a multipurpose RAM/ROM pack, called [[Making_1200_series_cartridges|SuperPack]] by Pavel Korensky.  Note the errata in the [[Media:Tek1240-SPDesign10.ZIP|README file]].
+*ROM Pack designations remain confusing.  Not only do they use two conventions - "12RMXX" and "12RM99 Option XX" - but there is overlap and conflict between those for 8-bit CPUs and those for 16-bit CPUs e.g. 12RM01 appears to refer to both 8080 and 8086 support (see: Tektronix 1987 catalog p.121).
+{| class="wikitable"
+|[[File:Tektronix 1240 front panel.jpeg|140px|]]
+| colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
+|-
+! Microprocessor
+! IC package
+! ROM pack
+! Probe adapter
+! Acq. boards required
+! Acq. probes required
+! Fastest clock supported
+|-
+| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
+|-
+| [[Intel 8080|8080]]
+|
+| style="text-align: center;" | [[12RM01]]
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4X [[P6460]]
+| style="text-align: center;" | Max
+|-
+| [[Intel 8051|8031/8051]]
+|
+| style="text-align: center;" | [[12RM99]] Opt 03
+| style="text-align: center;" | [[UPIK 40]]
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4X [[P6460]]
+| style="text-align: center;" | 12 MHz
+|-
+| [[Intel 8085|8085]]
+|
+| style="text-align: center;" | [[12RM02]]
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
+| style="text-align: center;" | Max
+|-
+| [[Intel 8086|8086]]
+| DIP
+| style="text-align: center;" | [[12RM03]]
+| style="text-align: center;" | [[PM201]]
+| style="text-align: center;" | 3
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 8.0 MHz
+|-
+| [[Intel 8086|8088]]
 | DIP
 | style="text-align: center;" | [[12RM04]]
 | style="text-align: center;" | [[PM201]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 8.0 Mhz
+| style="text-align: center;" | 8.0 MHz
 |-
-| 80186
+| [[Intel 8086|80186]]
 | LCC/PGA
 | style="text-align: center;" | [[12RM05]]
 | style="text-align: center;" | [[PM202]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 8.0 Mhz
+| style="text-align: center;" | 8.0 MHz
 |-
-| 80188
+| [[Intel 8086|80188]]
 | LCC/PGA
 | style="text-align: center;" | [[12RM06]]
 | style="text-align: center;" | [[PM202]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 8.0 Mhz
+| style="text-align: center;" | 8.0 MHz
 |-
-| 80286
+| [[Intel 80286|80286]]
 | LCC/PGA
 | style="text-align: center;" | [[12RM08]]
 | style="text-align: center;" | [[PM204]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 10.0 Mhz
+| style="text-align: center;" | 10.0 MHz
 |-
 | 8096/7
@@ Line 94: / Line 812: @@
 | style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 6*1
+| style="text-align: center;" | 6X [[P6460]]
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | 12 MHz
 |-
 | colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
 |-
-| 6800
+| [[Motorola 6800|6800]]
 |
 | style="text-align: center;" | [[12RM21]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 6801
+| [[Motorola 6800|6801]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 05
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 6802
+| [[Motorola 6802|6802]]
 |
 | style="text-align: center;" | [[12RM22]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 6805(E2)
+| [[Motorola 6800|6805(E2)]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 06
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 2*1
+| style="text-align: center;" | 2X [[P6460]]
 | style="text-align: center;" | Max
 |-
-| 6805(E3)
+| [[Motorola 6800|6805(E3)]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 07
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 3*1
+| style="text-align: center;" | 3X [[P6460]]
 | style="text-align: center;" | Max
 |-
-| 6808
+| [[Motorola 6800|6808]]
 |
 | style="text-align: center;" | [[12RM23]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 6809
+| [[Motorola 6809|6809]]
 |
 | style="text-align: center;" | [[12RM24]]
 | style="text-align: center;" | X
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 6809E
+| [[Motorola 6809|6809E]]
 |
 | style="text-align: center;" | [[12RM24]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
-| 68HC11
+| [[Motorola 6800|68HC11]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 08
 | style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 3*1
+| style="text-align: center;" | 3X [[P6460]]
 | style="text-align: center;" | Max
 |-
-| 68000
+| [[Motorola 68000|68000]]
 | DIP
 | style="text-align: center;" | [[12RM25]]
 | style="text-align: center;" | [[PM203]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
-| 68000
+| [[Motorola 68000|68000]]
 | PGA
 | style="text-align: center;" | [[12RM25]]
 | style="text-align: center;" | [[PM203]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
-| 68008
+| [[Motorola 68000|68008]]
 | DIP
 | style="text-align: center;" | [[12RM26]]
 | style="text-align: center;" | [[PM203]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
-| 68010
+| [[Motorola 68000|68010]]
 | DIP
 | style="text-align: center;" | [[12RM27]]
 | style="text-align: center;" | [[PM203]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
-| 68010
+| [[Motorola 68000|68010]]
 | PGA
 | style="text-align: center;" | [[12RM27]]
 | style="text-align: center;" | [[PM203]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
-| 68020
+| [[Motorola 68020|68020]]
 |
 | style="text-align: center;" | [[12RM31]]
 | style="text-align: center;" | [[PM205]]
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 25.0 Mhz
+| style="text-align: center;" | 25.0 MHz
 |-
-| 68030
+| [[Motorola 68030|68030]]
 |
 | style="text-align: center;" | [[12RM33]]
 | style="text-align: center;" | ?
 | style="text-align: center;" | 3
-| style="text-align: center;" | None
+| style="text-align: center;" | N/A
-| style="text-align: center;" | 25.0 Mhz
+| style="text-align: center;" | 25.0 MHz
 |-
 | DSP56000/1
 |
 | style="text-align: center;" | [[12RM99]] Opt 17
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 6*1
+| style="text-align: center;" | 6X [[P6460]]
-| style="text-align: center;" | 50 Mhz
+| style="text-align: center;" | 50 MHz
 |-
 | colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
 |-
-| Z80
+| [[Zilog Z-80|Z-80]]
 |
 | style="text-align: center;" | [[12RM41]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4X [[P6460]]
+| style="text-align: center;" | 8 MHz
+|-
+| [[Zilog Z-80|Z-80]]
+|
+| style="text-align: center;" | [[12RM07]]
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*1
+| style="text-align: center;" | 4X [[P6460]]
-| style="text-align: center;" | 8 Mhz
+| style="text-align: center;" | 8 MHz
 |-
-| Z8001/3
+| [[Zilog Z-8000|Z8001/3]]
 |
 | style="text-align: center;" | [[12RM42]]
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
-| Z8002/4
+| [[Zilog Z-8000|Z8002/4]]
 |
 | style="text-align: center;" | [[12RM43]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
 | style="text-align: center;" | 3*3
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
-| colspan="7" style="font-style:italic; background-color:#efefef;" | Texas instrument
+| colspan="7" style="font-style:italic; background-color:#efefef;" | Texas Instruments
 |-
-| TMS320320/320C25
+| [[Texas Instruments TMS320|TMS320320/320C25]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 11
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 5*1
+| style="text-align: center;" | 5X [[P6460]]
-| style="text-align: center;" | 20 Mhz
+| style="text-align: center;" | 20 MHz
 |-
-| TMS32010
+| [[Texas Instruments TMS320|TMS32010]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 14
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*1
+| style="text-align: center;" | 4X [[P6460]]
 | style="text-align: center;" | Max
 |-
@@ Line 286: / Line 1,012: @@
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
@@ Line 292: / Line 1,018: @@
 |
 | style="text-align: center;" | [[12RM99]] Opt 12
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 5*1
+| style="text-align: center;" | 5X [[P6460]]
 | style="text-align: center;" | Max
 |-
 | colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
 |-
-| 6502/C02
+| [[MOS Technology 6502|6502]]
+|
+| style="text-align: center;" | [[12RM63]]
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4*2
+| style="text-align: center;" | Max
+|-
+| [[MOS Technology 6502|65C02]]
 |
 | style="text-align: center;" | [[12RM63]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
 | style="text-align: center;" | 4*2
 | style="text-align: center;" | Max
 |-
-| 1802/4/5/6/(A/C/AC/BC)
+| [[RCA 1802]]/4/5/6/(A/C/AC/BC)
 |
 | style="text-align: center;" | [[12RM99]] Opt 22
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 3*1
+| style="text-align: center;" | 3X [[P6460]]
 | style="text-align: center;" | Max
 |-
-| ADSP2100
+| [[Analog Devices ADSP2100]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 17
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
-| style="text-align: center;" | 6*1
+| style="text-align: center;" | 6X [[P6460]]
 | style="text-align: center;" | Max
 |-
-| F9450
+| [[Fairchild F9450]]
 |
 | style="text-align: center;" | [[12RM62A]]
-| style="text-align: center;" | NA
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 3
 | style="text-align: center;" | 3*3
-| style="text-align: center;" | 40 Mhz
+| style="text-align: center;" | 40 MHz
 |-
 | MIL-Std 1705A
@@ Line 337: / Line 1,071: @@
 | style="text-align: center;" | ?
 | style="text-align: center;" | ?
-| style="text-align: center;" | 40 Mhz
+| style="text-align: center;" | 40 MHz
 |-
-| NSC800
+| [[National Semiconductor NSC800]]
 |
 | style="text-align: center;" | [[12RM71]]
-| style="text-align: center;" | X
+| style="text-align: center;" | N/A
+| style="text-align: center;" | 2
+| style="text-align: center;" | 4X [[P6460]]
+| style="text-align: center;" | Max
+|-
+| [[National Semiconductor NSC800]]
+|
+| style="text-align: center;" | [[12RM09]]
+| style="text-align: center;" | N/A
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*1
+| style="text-align: center;" | 4X [[P6460]]
 | style="text-align: center;" | Max
 |-
@@ Line 352: / Line 1,094: @@
 | style="text-align: center;" | [[UPIK 40]]
 | style="text-align: center;" | 2
-| style="text-align: center;" | 4*3
+| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
 | style="text-align: center;" | Max
 |-
@@ Line 365: / Line 1,107: @@
 | style="text-align: center;" | Max
 |-
-| GPIB
+| [[GPIB]]
 |
 | style="text-align: center;" | [[12RM99]] Opt 04
@@ Line 372: / Line 1,114: @@
 | style="text-align: center;" | 2*3
 | style="text-align: center;" | Max
+|}
+==Tektronix [[DAS9200]]==
+*Introduced 1987
+* (*1) [[92A60]] or [[92A90]] pobes can be used.
+* (*2) Only [[92A90]] probes can be used.
+* See the 1993 Tektronix catalog page 155-157 for the full list
+{| class="wikitable"
+|[[File:DAS9200(1).jpg|140px|]]
+! colspan="6" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tetkronix [[DAS9200]]
+|-
+! Microprocessor
+! IC package
+! Software
+! Probe adapter
+! Probe required
+! Fastest clock supported
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
+|-
+| 8085
+|
+| style="text-align: center;" | [[92DM02]]
+| style="text-align: center;" | [[92DM02]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 8086
+| DIP
+| style="text-align: center;" | [[92DM03]]
+| style="text-align: center;" | [[92DM03]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 8088
+| DIP
+| style="text-align: center;" | [[92DM04]]
+| style="text-align: center;" | [[92DM04]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 80186
+| LCC/PGA
+| style="text-align: center;" | [[92DM05]]
+| style="text-align: center;" | [[92DM05]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 80188
+| LCC/PGA
+| style="text-align: center;" | [[92DM06]]
+| style="text-align: center;" | [[92DM06]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 80286
+| LCC/PGA
+| style="text-align: center;" | [[92DM08]]
+| style="text-align: center;" | [[92DM08]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 80386
+|
+| style="text-align: center;" | [[92DM09]]
+| style="text-align: center;" | [[92DM09]]
+| style="text-align: center;" | *2
+| style="text-align: center;" | Max
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
+|-
+| 6809
+|
+| style="text-align: center;" | [[92DM24]]
+| style="text-align: center;" | [[92DM24]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 6809E
+|
+| style="text-align: center;" | [[92DM24]]
+| style="text-align: center;" | [[92DM24]]
+| style="text-align: center;" | NA
+| style="text-align: center;" | Max
+|-
+| 68000
+| DIP
+| style="text-align: center;" | [[92DM25]], or [[92DM27]]
+| style="text-align: center;" | [[92DM25]], or [[92DM27]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 68000
+| PGA
+| style="text-align: center;" | [[91TM27]]
+| style="text-align: center;" | ?
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 68010
+| DIP
+| style="text-align: center;" | [[92DM27]]
+| style="text-align: center;" | [[92DM27]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 68010
+| PGA
+| style="text-align: center;" | [[91TM27]]
+| style="text-align: center;" | ?
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 68020
+|
+| style="text-align: center;" | [[92DM31]]
+| style="text-align: center;" | [[92DM31]]
+| style="text-align: center;" | *2
+| style="text-align: center;" | Max
+|-
+|-
+| 68030
+|
+| style="text-align: center;" | [[92DM33]]
+| style="text-align: center;" | [[92DM33]]
+| style="text-align: center;" | ?
+| style="text-align: center;" | ?
+|-
+| 68040
+|
+| style="text-align: center;" | ?
+| style="text-align: center;" | ?
+| style="text-align: center;" | ?
+| style="text-align: center;" | ?
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z-80
+|
+| style="text-align: center;" | [[92DM41]]
+| style="text-align: center;" | [[92DM41]]
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Other microprocessors
+|-
+| F9450
+|
+| style="text-align: center;" | [[92DM64]]
+| style="text-align: center;" | Use [[92DM64]] with option 13 for non-MMU, else use without.
+| style="text-align: center;" | *1
+| style="text-align: center;" | Max
+|-
+| 1705A
+|
+| style="text-align: center;" | [[92DM64]]
+| style="text-align: center;" | Need adapter for emulator PIAs
+| style="text-align: center;" | *1
+| style="text-align: center;" | 40 MHz
+|}
+[[Category:Logic analyzer personality modules]]
+[[Category:ROM packs]]
+==Tektronix [[1225]]/[[1220]]==
+*In catalog 1988
+*Note that the configuration table for the [[1230]] is not the same as the one for the [[1240]]/[[1241]].
+The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
+{| class="wikitable"
+|[[File:Tek 1225 front.JPG|140px|]]
+! colspan="3" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
+|-
+! Microprocessor
+! Probe adapter
+! Fastest clock supported
+|-
+| colspan="4" style="font-style:italic; background-color:#efefef;" | Intel
+|-
+| 8085
+| style="text-align: center;" | [[PM404]]
+| style="text-align: center;" | Max
+|-
+| 8086
+| style="text-align: center;" | [[PM411]]
+| style="text-align: center;" |
+|-
+| 8088
+| style="text-align: center;" | [[PM411]]
+| style="text-align: center;" |
+|-
+| colspan="4" style="font-style:italic; background-color:#efefef;" | Motorola
+|-
+| 6800
+| style="text-align: center;" | [[PM407]]
+| style="text-align: center;" |
+|-
+| 6802
+| style="text-align: center;" | [[PM407]]
+| style="text-align: center;" |
+|-
+| 6809
+| style="text-align: center;" | [[PM406]]
+| style="text-align: center;" | Max
+|-
+| 6809E
+| style="text-align: center;" | [[PM406]]
+| style="text-align: center;" | Max
+|-
+| 68000
+| style="text-align: center;" | [[PM412]]
+| style="text-align: center;" |
+|-
+| colspan="4" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z80
+| style="text-align: center;" | [[PM402]]
+| style="text-align: center;" | Max
+|-
+| colspan="4" style="font-style:italic; background-color:#efefef;" | Other Microprocessor
+|-
+| 6502/C02
+| style="text-align: center;" | [[PM403]]
+| style="text-align: center;" | Max
+|-
+| colspan="4" style="font-style:italic; background-color:#efefef;" | Other
+|-
+| STD
+| style="text-align: center;" | [[PM405]]
+| style="text-align: center;" | Max
+|}
+==Tektronix [[1205]]==
+*In catalog 1988-1989
+{| class="wikitable"
+|[[File:Tek 1205 2.jpg|140px|]]
+! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1205]]
+|-
+! Microprocessor
+! Probe adapter
+! Acq. boards required
+! Acq. probes required
+! Fastest clock supported
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
+|-
+| Z80
+| style="text-align: center;" | [[PM302]]
+| style="text-align: center;" | X
+| style="text-align: center;" | None
+| style="text-align: center;" | 4 MHz
+|-
+| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
+|-
+| 6502/C02
+| style="text-align: center;" | [[PM303]]
+| style="text-align: center;" | X
+| style="text-align: center;" | None
+| style="text-align: center;" | 4 MHz
+|-
+| General
+| style="text-align: center;" | [[PM301]]
+| style="text-align: center;" | X
+| style="text-align: center;" | None
+| style="text-align: center;" | 4 MHz
 |}
 ==Tektronix [[1230]]==
-The [[1230DPA]] is required for all DPXXXX probes.
+*In catalog 1989-1993
-All acquisition boards are [[1230E1]].
+* The [[1230DPA]] is required for all DPXXXX probes.
-All the software needs is included with the personality module.
+* All acquisition boards are [[1230E1]].
+* All of the needed software is included with the personality module.
+Note from operators manual:
+<blockquote>
+''DISASSEMBLY DISPLAY''
+''Microprocessor disassembly is  an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to  use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it.  Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in  the operator's manual for each microprocessor disassembly probe. ''
+</blockquote>
 {| class="wikitable"
-! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix 1230
+|[[File:Tek 1230.jpg|140px|]]
+! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1230]]
 |-
-| style="text-decoration:underline;" | Micro- Processor
+! Microprocessor
-| style="text-decoration:underline;" | IC package
+! IC package
-| style="text-decoration:underline;" | Probe adapter
+! Probe adapter
-| style="text-decoration:underline;" | Acq. Boards required
+! Acq. boards required
-| style="text-decoration:underline;" | Acq. Probes required
+! Acq. probes required
-| style="text-decoration:underline;" | Fastest clock supported
+! Fastest clock supported
 |-
 | colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
@@ Line 395: / Line 1,412: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | 12 MHz
 |-
 | 8085
@@ Line 402: / Line 1,419: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 6 Mhz
+| style="text-align: center;" | 6 MHz
 |-
 | 8086
 | style="text-align: center;" | DIP
-| style="text-align: center;" | [[DP8086D]]
+| style="text-align: center;" | [[PM411]],[[DP8086D]]
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
 | 8087
@@ Line 420: / Line 1,437: @@
 | 8088
 | style="text-align: center;" | DIP
-| style="text-align: center;" | [[DP8086D]]
+| style="text-align: center;" | [[PM411]],[[DP8086D]]
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
 | 80186
@@ Line 430: / Line 1,447: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
 | 80188
@@ Line 437: / Line 1,454: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
 | 8096/7
@@ Line 444: / Line 1,461: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | 12 MHz
 |-
 | 80C196
@@ Line 451: / Line 1,468: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | 12 MHz
 |-
 | 80286
@@ Line 458: / Line 1,475: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12.5 Mhz
+| style="text-align: center;" | 12.5 MHz
 |-
 | 80287
@@ Line 465: / Line 1,482: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12.5 Mhz
+| style="text-align: center;" | 12.5 MHz
 |-
 | 80286
@@ Line 472: / Line 1,489: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12.5 Mhz
+| style="text-align: center;" | 12.5 MHz
 |-
 | 80287
@@ Line 479: / Line 1,496: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 12.5 Mhz
+| style="text-align: center;" | 12.5 MHz
 |-
 | 80386SX
@@ Line 486: / Line 1,503: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | 80387SX
@@ Line 493: / Line 1,510: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
@@ Line 516: / Line 1,533: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 2 Mhz
+| style="text-align: center;" | 2 MHz
 |-
 | 6809E
@@ Line 523: / Line 1,540: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 2 Mhz
+| style="text-align: center;" | 2 MHz
 |-
 | 68HC11
@@ Line 530: / Line 1,547: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 12 Mhz
+| style="text-align: center;" | 12 MHz
 |-
 | 68000
 | style="text-align: center;" | DIP
-| style="text-align: center;" | [[DP68KD]]
+| style="text-align: center;" | [[PM412]],[[DP68KD]]
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | 68000
@@ Line 544: / Line 1,561: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | 68010
@@ Line 551: / Line 1,568: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | 68010
@@ Line 558: / Line 1,575: @@
 | style="text-align: center;" | 3
 | style="text-align: center;" | None
-| style="text-align: center;" | 16 Mhz
+| style="text-align: center;" | 16 MHz
 |-
 | colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
 |-
-| Z80
+| Z-80
 | style="text-align: center;" | DIP
 | style="text-align: center;" | [[PM402]]
@@ Line 585: / Line 1,602: @@
 | style="text-align: center;" | 2
 | style="text-align: center;" | None
-| style="text-align: center;" | 12.5 Mhz
+| style="text-align: center;" | 12.5 MHz
 |-
 | GPIB
@@ Line 592: / Line 1,609: @@
 | style="text-align: center;" | Any
 | style="text-align: center;" | None
-| style="text-align: center;" | 10 Mhz
+| style="text-align: center;" | 10 MHz
 |-
 | RS-232
@@ Line 602: / Line 1,619: @@
 |}
-==Tektronix [[1225]]/[[1220]]==
+==Tektronix [[Prism 3002]]==
-Note that the configuration table for the [[1230]] is not the same as the one for it's two predecessors.
+*Introduced 1990
-The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
-{| class="wikitable"
-! colspan="4" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
-|-
-| style="text-decoration:underline;" | Micro- Processor
-| style="text-decoration:underline;" | IC package
-| style="text-decoration:underline;" | Probe adapter
-| style="text-decoration:underline;" | Fastest clock supported
-|-
-| colspan="4" style="font-style:italic; background-color:#efefef;" | Intel
-|-
-| 8085
-|
-| style="text-align: center;" | [[PM404]]
-| style="text-align: center;" | Max
-|-
-| 8086
-|
-| style="text-align: center;" | [[PM411]]
-| style="text-align: center;" |
-|-
-| 8088
-|
-| style="text-align: center;" | [[PM411]]
-| style="text-align: center;" |
-|-
-| colspan="4" style="font-style:italic; background-color:#efefef;" | Motorola
-|-
-| 6800
-|
-| style="text-align: center;" | [[PM407]]
-| style="text-align: center;" |
-|-
-| 6802
-|
-| style="text-align: center;" | [[PM407]]
-| style="text-align: center;" |
-|-
-| 6809
-|
-| style="text-align: center;" | [[PM406]]
-| style="text-align: center;" | Max
-|-
-| 6809E
-|
-| style="text-align: center;" | [[PM406]]
-| style="text-align: center;" | Max
-|-
-| 68000
-|
-| style="text-align: center;" | [[PM412]]
-| style="text-align: center;" |
-|-
-| colspan="4" style="font-style:italic; background-color:#efefef;" | Zilog
-|-
-| Z80
-|
-| style="text-align: center;" | [[PM402]]
-| style="text-align: center;" | Max
-|-
-| colspan="4" style="font-style:italic; background-color:#efefef;" | Other Microprocessor
-|-
-| 6502/C02
-|
-| style="text-align: center;" | [[PM403]]
-| style="text-align: center;" | Max
-|-
-| colspan="4" style="font-style:italic; background-color:#efefef;" | Other
-|-
-| STD
-|
-| style="text-align: center;" | [[PM405]]
-| style="text-align: center;" | Max
-|}
-==Tektronix [[1205]]==
-{| class="wikitable"
-! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1205]]
-|-
-| style="text-decoration:underline;" | Micro- Processor
-| style="text-decoration:underline;" | IC package
-| style="text-decoration:underline;" | Probe adapter
-| style="text-decoration:underline;" | Acq. Boards required
-| style="text-decoration:underline;" | Acq. Probes required
-| style="text-decoration:underline;" | Fastest clock supported
-|-
-| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
-|-
-| Z80
-|
-| style="text-align: center;" | [[PM302]]
-| style="text-align: center;" | X
-| style="text-align: center;" | None
-| style="text-align: center;" | 4 Mhz
-|-
-| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
-|-
-| 6502/C02
-|
-| style="text-align: center;" | [[PM303]]
-| style="text-align: center;" | X
-| style="text-align: center;" | None
-| style="text-align: center;" | 4 Mhz
-|-
-| General
-|
-| style="text-align: center;" | [[PM301]]
-| style="text-align: center;" | X
-| style="text-align: center;" | None
-| style="text-align: center;" | 4 Mhz
-|}
-==Tektronix [[7D02]]==
-The [[PM101]] is a general purpose probe, it can be defined to work with processors not listed here.
-Note:
-* "FM" stands for Full mnemonic disassembly.
-* "STD" stands for Standard radices (Hex, Bin, Octal).
-{| class="wikitable"
-! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tektronix [[7D02]]
-|-
-| style="text-decoration:underline;" | Micro- Processor
-| style="text-decoration:underline;" | Support Feature
-| style="text-decoration:underline;" | Probe adapter
-| style="text-decoration:underline;" | Requires
-| style="text-decoration:underline;" | Fastest clock supported
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
-|-
-| 8031
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8035
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8039
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8048
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8049
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8051
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8080
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | PM101 Opt 01
-| style="text-align: center;" | 20 Mhz
-|-
-| 8085
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM104]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 10 Mhz
-|-
-| 8086
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM106]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 8 Mhz
-|-
-| 8088
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM107]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 5 Mhz
-|-
-| 8748
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 8751
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
-|-
-| 6800
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM102]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 2 Mhz
-|-
-| 6801
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 6802
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM103]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 6 Mhz
-|-
-| 6803
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 6808
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM103]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 6 Mhz
-|-
-| 6809
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM111]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 8 Mhz
-|-
-| 6809E
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM111]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 8 Mhz
-|-
-| 68000
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM109]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 10 Mhz
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
-|-
-| Z80
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM105]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 6 Mhz
-|-
-| Z8001
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM110]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 6 Mhz
-|-
-| Z8002
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM108]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 4 Mhz
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instrument
-|-
-| TMS9900
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6002-00.pdf|061-6002-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
-|-
-| 1802
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | [[Media:061-6001-00.pdf|061-6001-00]] Application manual
-| style="text-align: center;" | 20 Mhz
-|-
-| 6502
-| style="text-align: center;" | FM
-| style="text-align: center;" | [[PM101]]
-| style="text-align: center;" | PM101 Opt 02
-| style="text-align: center;" | 20 Mhz
-|-
-| colspan="5" style="font-style:italic; background-color:#efefef;" | Other
-|-
-| MULTIBUS
-| style="text-align: center;" | STD
-| style="text-align: center;" | [[PM112]]
-| style="text-align: center;" | X
-| style="text-align: center;" | 5 Mhz
-|}
-==Tektronix [[DAS9100]]==
-Note:
-*All acquisition boards are either [[91A24]] or [[91AE24]].
-*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
-*(*1) means that [[P6460]] probes are always required.
-*(*2) means that [[P6460]] probes are required for CMOS version.
-*(*3) means that [[P6460]] or [[P6462]] probes can be used.
-==Tektronix [[DAS9200]]==
+==Tektronix [[3001 GPX]]==
+*Introduced 1993
+*To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM.
-[[Category:Logic Analyzer personality modules]]
+==Tektronix [[TLA 700]]==
-[[Category:ROM packs]]
+*Introduced 1997-1998