533: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |manufacturer=Tektronix |designers= |
{{Oscilloscope Sidebar
series=5000-series scopes |
|manufacturer=Tektronix  
model= 533 |
|series=500-series scopes
summary=15 MHz scope |
|model=533
image=Wellenkino 533a.jpg |
|summary=15 MHz oscilloscope
caption=Tektronix 533A front |
|image=Wellenkino 533a.jpg
introduced=1958 |
|caption=Tektronix 533A front
discontinued=1973 |
|introduced=1958
manuals=
|discontinued=1973
* [[Media:070-0258-00.pdf|533/533A Instruction]] (OCR PDF, 30M)
|designers=
* [[Media:tek_533a_catalog.pdf|533A in 1968 Catalog]] (OCR PDF, 2M)
|manuals=
* [[Media:tek_type_533_fcp.pdf|533 Factory Calibration Procedure, September 1959]] (OCR PDF)
* [[Media:070-258.pdf|533/533A Instruction]] (OCR, 30M)
* [[Media:Tek 533a fcp dec 1968.pdf|533A Factory Calibration Procedure, December 1968 (PDF, needs OCR)]]
* [[Media:tek_533a_catalog.pdf|533A in 1968 Catalog]] (OCR, 2M)
* [[Media:Tek 533a fcp sep 1966.pdf|533A Factory Calibration Procedure, September 1966]]
* [[Media:tek_type_533_fcp.pdf|533 Factory Calibration Procedure, September 1959]] (OCR)
* [[Media:Tek 533a fcp dec 1968.pdf|533A Factory Calibration Procedure, December 1968 (OCR)]]
* [[Media:Tek 533a fcp sep 1966.pdf|533A Factory Calibration Procedure, September 1966]] (OCR)
}}
}}
The '''Tektronix Type 533''' is a 15 MHz oscilloscope [[introduced in 1958]]
The '''Tektronix Type 533''' is a 15 MHz oscilloscope [[introduced in 1958]] that uses [[letter-series and 1-series plug-ins]].
that uses [[letter-series and 1-series plug-ins]].


It is similar to a [[535]], but without the second, delayed timebase.
It is similar to a [[535]], but without the second, delayed timebase.
Line 23: Line 24:
Later 533A have [[BNC connector]]s.
Later 533A have [[BNC connector]]s.
The standard CRT for the 533 and 533A is the [[T5330|T5330-2]].
The standard CRT for the 533 and 533A is the [[T5330|T5330-2]].
Difference between 533 and 533A is only trigger mode.
The difference between the 533 and 533A is only the trigger mode.


{{BeginSpecs}}
{{BeginSpecs}}
Line 39: Line 40:
{{Spec | Weight| 61.5 lbs / 27.8 kg }}
{{Spec | Weight| 61.5 lbs / 27.8 kg }}
{{EndSpecs}}
{{EndSpecs}}


==Internals==
==Internals==
Line 48: Line 48:


Trigger pickoff is taken after the cathode follower stage in the vertical amplifier.
Trigger pickoff is taken after the cathode follower stage in the vertical amplifier.
There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a
There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a cathode follower, buffering the trigger signal.   
cathode follower, buffering the trigger signal.   


The trigger circuit is a [[6DJ8]] trigger amplifier followed by a 6DJ8 Schmitt trigger.
The trigger circuit is a [[6DJ8]] trigger amplifier followed by a 6DJ8 Schmitt trigger.
Triggering can be from the internal pickoff or from an external signal or "line" trigger,
Triggering can be from the internal pickoff or from an external signal, or "line" trigger via a 6.3 V tap on the power transformer.   
from a 6.3 V tap on the power transformer.   


The 533 contains a 53 °C (128 °F) [[thermal cutoff]].
The 533 contains a 53 °C (128 °F) [[thermal cutoff]].
The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator
The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator and five [[5642]] high-voltage rectifier diode tubes.
and five [[5642]] high-voltage rectifier diode tubes.


==Pictures==
==Pictures==
Line 85: Line 82:
</gallery>
</gallery>


 
{{Parts|533}}
{{Parts|533A}}


[[Category:500 series scopes]]
[[Category:500 series scopes]]

Latest revision as of 12:57, 10 March 2024

Tektronix 533
15 MHz oscilloscope
Tektronix 533A front

Produced from 1958 to 1973

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type 533 is a 15 MHz oscilloscope introduced in 1958 that uses letter-series and 1-series plug-ins.

It is similar to a 535, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100.

There is also a rack-mount version, the RM33. Later 533A have BNC connectors. The standard CRT for the 533 and 533A is the T5330-2. The difference between the 533 and 533A is only the trigger mode.

Key Specifications

Bandwidth DC to 15 MHz (≤ 3 dB) with Type K plug-in
Rise time 0.024 μs
Line Voltage 108/115/122/216/230/244 VAC ±10%, selected via soldering wire on transformer, 50 Hz to 60 Hz
Thermal Protection Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Power Consumption 500 W with CA plug-in
Cooling AC Fan
Trigger Modes (533) AC/DC/AC Slow, and HF Sync
Trigger Modes (533A) AC/DC/AC LF Reject, and HF Sync
Anode Potential 10 kV
Screen Area 6 cm × 10 cm
Construction Aluminum alloy chassis. Anodized front panel
Weight 61.5 lbs / 27.8 kg

Internals

The vertical amplifier consists of a 12BY7 differential amplifier followed by a 6DJ8 cathode-follower, followed by a 6197 differential (common-cathode) output stage that drives the 200 ns L-C delay line, which drives the vertical deflection plates of the CRT.

Trigger pickoff is taken after the cathode follower stage in the vertical amplifier. There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a cathode follower, buffering the trigger signal.

The trigger circuit is a 6DJ8 trigger amplifier followed by a 6DJ8 Schmitt trigger. Triggering can be from the internal pickoff or from an external signal, or "line" trigger via a 6.3 V tap on the power transformer.

The 533 contains a 53 °C (128 °F) thermal cutoff. The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator and five 5642 high-voltage rectifier diode tubes.

Pictures

533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

  • 533

    533

533A

  • front from different 533A

    front from different 533A

  • 533A front

    533A front

  • 533A rear

    533A rear

  • 533A

    533A

  • 533A delay line

    533A delay line

  • 533A delay line

    533A delay line


Some Parts Used in the 533

Part Part Number(s) Class Description Used in
120-0140-00 120-0140-00 Discrete component power transformer 533 • 533A
120-037 120-037 Discrete component power transformer 531 • 533
12BY7A 154-047 • 154-0047-00 Vacuum Tube (Pentode) miniature 6.5 W power pentode 106 • 163 • 524 • 531 • 533 • 535 • 536 • 541 • 543 • 535 • 545 • 545A • 549 • 555 • 75 • 3A75 • 3B5
5642 154-0051-00 • 154-0079-00 Vacuum Tube (Diode) directly-heated high-voltage rectifier 310 • 310A • 316 • 317 • 360 • 453 • 502 • 502A • 503 • 504 • 506 • 513 • 515 • 516 • 524 • 529 • RM529 • 533 • 533A • 535 • 536 • 543 • 543A • 543B • 545 • 545A • 545B • 547 • 551 • 555 • 556 • 560 • 561 • 561A • 561S • 564 • 567 • 570 • 575 • 581 • 581A • 585 • 585A • 647 • 647A
6197 154-0146-00 Vacuum Tube (Pentode) 7.5 W power pentode 516 • 531 • 533 • 535 • 535A • 547 • 556 • 75 • 3A75
6DJ8 154-0187-00 • 154-0305-00 Vacuum Tube (Dual Triode) dual triode 067-506 • 111 • 132 • 161 • 310A • 316 • 317 • 502 • 502A • 503 • 504 • 506 • 515 • 516 • 519 • 526 • 529 • RM529 • 533 • 535 • 536 • 543 • 544 • 545 • 545A • 545B • 546 • 547 • 549 • 555 • 556 • 561A • 561S • 564 • 565 • 567 • 581 • 581A • 585 • 585A • 661 • 1A4 • 1S1 • 60 • 2A60 • 63 • 2A63 • 67 • 2B67 • 3A1 • 3A1S • 3A2 • 3A3 • 3A6 • 3A7 • 72 • 3A72 • 75 • 3A75 • 4S2 • 51 • 3B1 • 3B1S • 3B2 • 3B3 • 3B4 • 3M1 • 3S76 • 3T77 • 3T77A • 9A1 • 9A2 • 1121 • 80 • 81 • 82 • 86 • B • O • W • Z • Telequipment D56 • Telequipment S32A • Telequipment D52 • S-311 • Telequipment TD51 • Telequipment S52 • Telequipment S51 • Telequipment Type A • TU-4
T5330 154-0178-00 • 154-0165-00 • 154-0179-00 • 154-0180-00 • 154-0350-00 CRT 5" CRT RM31A • RM33 • RM33A • RM35A • 531A • 533 • 533A • 535A


Some Parts Used in the 533A

Part Part Number(s) Class Description Used in
120-0140-00 120-0140-00 Discrete component power transformer 533 • 533A
5642 154-0051-00 • 154-0079-00 Vacuum Tube (Diode) directly-heated high-voltage rectifier 310 • 310A • 316 • 317 • 360 • 453 • 502 • 502A • 503 • 504 • 506 • 513 • 515 • 516 • 524 • 529 • RM529 • 533 • 533A • 535 • 536 • 543 • 543A • 543B • 545 • 545A • 545B • 547 • 551 • 555 • 556 • 560 • 561 • 561A • 561S • 564 • 567 • 570 • 575 • 581 • 581A • 585 • 585A • 647 • 647A
T5330 154-0178-00 • 154-0165-00 • 154-0179-00 • 154-0180-00 • 154-0350-00 CRT 5" CRT RM31A • RM33 • RM33A • RM35A • 531A • 533 • 533A • 535A
Retrieved from "https://w140.com/tekwiki/index.php?title=533&oldid=91837"