3A1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
|series=560-series scopes | |series=560-series scopes | ||
|type=3A1 | |type=3A1 | ||
|summary= | |summary=10 MHz dual-trace amplifier plug-in | ||
|image=3a1 | |image=Tek 3a1 front.jpeg | ||
|caption=Type 3A1 front view | |caption=Type 3A1 front view | ||
|introduced=1962 | |introduced=1962 | ||
| Line 14: | Line 14: | ||
* [[Media:Tek 3a1 fcp nov 1963.pdf|Tektronix 3A1 Factory Calibration Procedure, November 1963]] | * [[Media:Tek 3a1 fcp nov 1963.pdf|Tektronix 3A1 Factory Calibration Procedure, November 1963]] | ||
}} | }} | ||
The '''Tektronix | The '''Tektronix 3A1''' is a 10 MHz dual-trace amplifier plug-in for [[560-series scopes]], [[introduced in 1962]]. It is compatible with all the scopes in the 560 series, other than the [[560]] itself, and also with the [[129]] four bay enclosure and power supply. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
| Line 22: | Line 22: | ||
{{Spec | Input impedance | 1 MΩ // 47 pF }} | {{Spec | Input impedance | 1 MΩ // 47 pF }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Links== | |||
{{Documents|Link=3A1}} | |||
==Internals== | ==Internals== | ||
| Line 29: | Line 32: | ||
Channel switching in ALTERNATE mode is done using diodes. | Channel switching in ALTERNATE mode is done using diodes. | ||
The output stage that drives the vertical deflection plates of the scope uses a pair of [[8233]] frame grid power pentode tubes. | The output stage that drives the vertical deflection plates of the scope uses a pair of [[8233]] frame grid power pentode tubes. | ||
Tektronix added a 260 ns delay line to the 3A1 to make the [[3A6]]. | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
3a1 front2.jpg |Front | 3a1 front2.jpg |3A1 Front | ||
3a1 right2.jpg | Right | 3a1 right2.jpg |3A1 Right | ||
3a1 right.jpg | Right | 3a1 right.jpg |3A1 Right | ||
3a1 top.jpg | Top | 3a1 top.jpg |3A1 Top | ||
3a1 bottom.jpg | Bottom | 3a1 bottom.jpg |3A1 Bottom | ||
3a1 input amp and switching.png| | 3a1 input amp and switching.png|3A1 Input Amplifier Schematic | ||
</gallery> | </gallery> | ||
==Components== | |||
{{Parts|3A1}} | {{Parts|3A1}} | ||
[[Category:560 series plugins]] | [[Category:560 series plugins]] | ||
Latest revision as of 04:47, 29 November 2023
The Tektronix 3A1 is a 10 MHz dual-trace amplifier plug-in for 560-series scopes, introduced in 1962. It is compatible with all the scopes in the 560 series, other than the 560 itself, and also with the 129 four bay enclosure and power supply.
Key Specifications
| Bandwidth | 10 MHz |
|---|---|
| Risetime | 35 ns |
| Deflection | 10 mV/div to 10 V/div, 1−2−5 sequence |
| Input impedance | 1 MΩ // 47 pF |
Links
Documents Referencing 3A1
- (no results)
Internals
The input signal passes through compensated attenuators and then into a cathode-follower stage made of two 7586 Nuvistor tubes.
Channel switching in ALTERNATE mode is done using diodes. The output stage that drives the vertical deflection plates of the scope uses a pair of 8233 frame grid power pentode tubes.
Tektronix added a 260 ns delay line to the 3A1 to make the 3A6.
Pictures
-
3A1 Front
-
3A1 Right
-
3A1 Right
-
3A1 Top
-
3A1 Bottom
-
3A1 Input Amplifier Schematic
