CG5011: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
class=signal generator | image=cg5011.jpg | introduced=1990 | discontinued=(?) | | class=signal generator | image=cg5011.jpg | introduced=1990 | discontinued=(?) | | ||
designers= |manuals= | designers= |manuals= | ||
* [ | * [[Media:070-7745-01.pdf|CG5010/CG5011 Manual Vol.1]]<br /><small>'''Alternate: [[Media:070-7745-01_600dpi.pdf|600 dpi version, 118MB]]'''</small> | ||
* [ | * [[Media:070-7746-03.pdf|CG5010/CG5011 Manual Vol.2 (Service)]]<br /><small>'''Alternate: [[Media:070-7746-03_600dpi.pdf|600 dpi version, 184MB]]'''</small> | ||
}} | }} | ||
Latest revision as of 10:22, 1 November 2023
The Tektronix CG5011 is a programmable calibration generator plug-in for the TM5000 system.
It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system.
The CG5011 occupies three slots in a TM5006 mainframe. It comes with a 015-0611-00 Programmable Pulse Head (required for operation) and a 015-0310-01 Comparator Head. The cable set p/n is 012-0884-00.
An optional 015-0309-01 variable remote control attaches through a LEMO S-series connector.
Key Specifications
- please add
Test modes:
- Vertical Gain
- Horizontal Timing and Gain
- Vertical Bandwidth/Pulse Response Characteristics
- Probe Accuracy and Compensation
- Current-Probe Accuracy
- Calibrator-Output Accuracy
Option 01 adds a temperature compensated, 5 MHz crystal oscillator for a high accuracy time base.