Microprocessor support table: Difference between revisions
Jump to navigation
Jump to search
| (19 intermediate revisions by one other user not shown) | |||
| Line 210: | Line 210: | ||
See [[91TMXX tapes]] for information on tapes. | See [[91TMXX tapes]] for information on tapes. | ||
Note: | Note: | ||
* | *In catalog 1982-1989 | ||
*All acquisition boards are either [[91A24]] or [[91AE24]]. | *All acquisition boards are either [[91A24]] or [[91AE24]]. | ||
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required. | *If the [[UPIK 40]] harness is listed it means that it is supported, but not required. | ||
| Line 720: | Line 720: | ||
==Tektronix [[1240]]/[[1241]]== | ==Tektronix [[1240]]/[[1241]]== | ||
* | *In catalog 1984-1990 | ||
*All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used. | *All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used. | ||
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required. | *If the [[UPIK 40]] harness is listed it means that it is supported, but not required. | ||
| Line 812: | Line 812: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | 6X [[P6460]] | ||
| style="text-align: center;" | 12 MHz | | style="text-align: center;" | 12 MHz | ||
|- | |- | ||
| Line 846: | Line 846: | ||
| style="text-align: center;" | [[UPIK 40]] | | style="text-align: center;" | [[UPIK 40]] | ||
| style="text-align: center;" | 2 | | style="text-align: center;" | 2 | ||
| style="text-align: center;" | | | style="text-align: center;" | 2X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 854: | Line 854: | ||
| style="text-align: center;" | [[UPIK 40]] | | style="text-align: center;" | [[UPIK 40]] | ||
| style="text-align: center;" | 2 | | style="text-align: center;" | 2 | ||
| style="text-align: center;" | | | style="text-align: center;" | 3X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 886: | Line 886: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 2 | | style="text-align: center;" | 2 | ||
| style="text-align: center;" | | | style="text-align: center;" | 3X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 894: | Line 894: | ||
| style="text-align: center;" | [[PM203]] | | style="text-align: center;" | [[PM203]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 16 MHz | | style="text-align: center;" | 16 MHz | ||
|- | |- | ||
| Line 902: | Line 902: | ||
| style="text-align: center;" | [[PM203]] | | style="text-align: center;" | [[PM203]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 16 MHz | | style="text-align: center;" | 16 MHz | ||
|- | |- | ||
| Line 910: | Line 910: | ||
| style="text-align: center;" | [[PM203]] | | style="text-align: center;" | [[PM203]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 16 MHz | | style="text-align: center;" | 16 MHz | ||
|- | |- | ||
| Line 918: | Line 918: | ||
| style="text-align: center;" | [[PM203]] | | style="text-align: center;" | [[PM203]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 16 MHz | | style="text-align: center;" | 16 MHz | ||
|- | |- | ||
| Line 926: | Line 926: | ||
| style="text-align: center;" | [[PM203]] | | style="text-align: center;" | [[PM203]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 16 MHz | | style="text-align: center;" | 16 MHz | ||
|- | |- | ||
| Line 934: | Line 934: | ||
| style="text-align: center;" | [[PM205]] | | style="text-align: center;" | [[PM205]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 25.0 MHz | | style="text-align: center;" | 25.0 MHz | ||
|- | |- | ||
| Line 942: | Line 942: | ||
| style="text-align: center;" | ? | | style="text-align: center;" | ? | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 25.0 MHz | | style="text-align: center;" | 25.0 MHz | ||
|- | |- | ||
| Line 950: | Line 950: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | 6X [[P6460]] | ||
| style="text-align: center;" | 50 MHz | | style="text-align: center;" | 50 MHz | ||
|- | |- | ||
| Line 994: | Line 994: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | 5X [[P6460]] | ||
| style="text-align: center;" | 20 MHz | | style="text-align: center;" | 20 MHz | ||
|- | |- | ||
| Line 1,020: | Line 1,020: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | 5X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 1,046: | Line 1,046: | ||
| style="text-align: center;" | [[UPIK 40]] | | style="text-align: center;" | [[UPIK 40]] | ||
| style="text-align: center;" | 2 | | style="text-align: center;" | 2 | ||
| style="text-align: center;" | | | style="text-align: center;" | 3X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 1,054: | Line 1,054: | ||
| style="text-align: center;" | N/A | | style="text-align: center;" | N/A | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | | | style="text-align: center;" | 6X [[P6460]] | ||
| style="text-align: center;" | Max | | style="text-align: center;" | Max | ||
|- | |- | ||
| Line 1,280: | Line 1,280: | ||
==Tektronix [[1225]]/[[1220]]== | ==Tektronix [[1225]]/[[1220]]== | ||
* | *In catalog 1988 | ||
*Note that the configuration table for the [[1230]] is not the same as the one for | *Note that the configuration table for the [[1230]] is not the same as the one for the [[1240]]/[[1241]]. | ||
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes. | The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 1,347: | Line 1,347: | ||
==Tektronix [[1205]]== | ==Tektronix [[1205]]== | ||
* | *In catalog 1988-1989 | ||
{| class="wikitable" | {| class="wikitable" | ||
|[[File:Tek 1205 2.jpg|140px|]] | |[[File:Tek 1205 2.jpg|140px|]] | ||
| Line 1,382: | Line 1,382: | ||
==Tektronix [[1230]]== | ==Tektronix [[1230]]== | ||
*In catalog 1989-1993 | |||
* The [[1230DPA]] is required for all DPXXXX probes. | * The [[1230DPA]] is required for all DPXXXX probes. | ||
* All acquisition boards are [[1230E1]]. | * All acquisition boards are [[1230E1]]. | ||
* All of the needed software is included with the personality module. | * All of the needed software is included with the personality module. | ||
Note from operators manual: | |||
<blockquote> | |||
''DISASSEMBLY DISPLAY'' | |||
''Microprocessor disassembly is an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it. Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in the operator's manual for each microprocessor disassembly probe. '' | |||
</blockquote> | |||
{| class="wikitable" | {| class="wikitable" | ||
|[[File:Tek 1230.jpg|140px|]] | |[[File:Tek 1230.jpg|140px|]] | ||
| Line 1,414: | Line 1,423: | ||
| 8086 | | 8086 | ||
| style="text-align: center;" | DIP | | style="text-align: center;" | DIP | ||
| style="text-align: center;" | [[DP8086D]] | | style="text-align: center;" | [[PM411]],[[DP8086D]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | None | | style="text-align: center;" | None | ||
| Line 1,428: | Line 1,437: | ||
| 8088 | | 8088 | ||
| style="text-align: center;" | DIP | | style="text-align: center;" | DIP | ||
| style="text-align: center;" | [[DP8086D]] | | style="text-align: center;" | [[PM411]],[[DP8086D]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | None | | style="text-align: center;" | None | ||
| Line 1,542: | Line 1,551: | ||
| 68000 | | 68000 | ||
| style="text-align: center;" | DIP | | style="text-align: center;" | DIP | ||
| style="text-align: center;" | [[DP68KD]] | | style="text-align: center;" | [[PM412]],[[DP68KD]] | ||
| style="text-align: center;" | 3 | | style="text-align: center;" | 3 | ||
| style="text-align: center;" | None | | style="text-align: center;" | None | ||
| Line 1,609: | Line 1,618: | ||
| style="text-align: center;" | 19.2 K baud | | style="text-align: center;" | 19.2 K baud | ||
|} | |} | ||
==Tektronix [[Prism 3002]]== | |||
*Introduced 1990 | |||
==Tektronix [[3001 GPX]]== | |||
*Introduced 1993 | |||
*To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM. | |||
==Tektronix [[TLA 700]]== | |||
*Introduced 1997-1998 | |||
Latest revision as of 14:45, 3 October 2024
These tables describe the configurations necessary for specific microprocessors on Tektronix logic analyzers.
Those analyzers not providing any specific target support (i.e. connection, disassembly) are listed as a matter of chronology and convenience for the reader.
"N/A" means that the option is not applicable; "?" means that no information has been found to date.
"Max" means that it supports the maximum speed for the processor.
Tektronix 7D01
- Introduced 1977
- No microprocessor support.
Sony/Tektronix 308 Data Analyzer
- Introduced 1980
- No microprocessor support
Tektronix 7D02
Note:
- The PM101 is a general purpose probe, it can be defined to work with processors not listed here.
- "FM" stands for Full mnemonic disassembly.
- "STD" stands for Standard radices (Hex, Bin, Octal).
- In production 1981-1984.
|
Tektronix 7D02 | ||||
|---|---|---|---|---|---|
| Microprocessor | Support Feature | Probe adapter | Requires | Fastest clock supported | |
| Intel | |||||
| 8031 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
| 8035 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
| 8039 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
| 8048 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
| 8049 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
| 8051 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
| 8080 | FM | PM101 | PM101 Opt 01 | 20 MHz | |
| 8085 | FM | PM104 | X | 10 MHz | |
| 8086 | FM | PM106 | X | 8 MHz | |
| 8088 | FM | PM107 | X | 5 MHz | |
| 8748 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
| 8751 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
| Motorola | |||||
| 6800 | FM | PM102 | X | 2 MHz | |
| 6801 | STD | PM101 | 061-6000-00 Application manual | 20 MHz | |
| 6802 | FM | PM103 | X | 6 MHz | |
| 6803 | STD | PM101 | 061-6000-00 Application manual | 20 MHz | |
| 6808 | FM | PM103 | X | 6 MHz | |
| 6809 | FM | PM111 | X | 8 MHz | |
| 6809E | FM | PM111 | X | 8 MHz | |
| 68000 | FM | PM109 | X | 10 MHz | |
| Zilog | |||||
| Z-80 | FM | PM105 | X | 6 MHz | |
| Z8001 | FM | PM110 | X | 6 MHz | |
| Z8002 | FM | PM108 | X | 4 MHz | |
| Texas Instruments | |||||
| TMS9900 | STD | PM101 | 061-6002-00 Application manual | 20 MHz | |
| Other microproscessor | |||||
| 1802 | STD | PM101 | 061-6001-00 Application manual | 20 MHz | |
| 6502 | FM | PM101 | PM101 Opt 02 | 20 MHz | |
| Other | |||||
| MULTIBUS | STD | PM112 | X | 5 MHz | |
Tektronix DAS9100
See 91TMXX tapes for information on tapes. Note:
- In catalog 1982-1989
- All acquisition boards are either 91A24 or 91AE24.
- If the UPIK 40 harness is listed it means that it is supported, but not required.
- (*1) means that P6460 probes are always required.
- (*2) means that P6460 probes are required for CMOS version.
- (*3) means that P6460 or P6462 probes can be used.
- PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
|
Tektronix DAS9100 | ||||||
|---|---|---|---|---|---|---|---|
| Microprocessor | IC package | Mnemonic tape | Probe adapter | Acq.Boards required | Acq.Probes required | Fastest clock supported | |
| Intel | |||||||
| 8080 | 91TM01 | X | 2 | 4*3 | Max | ||
| 8031 | 91TM07 | X | 2 | 4*1 | Max | ||
| 8039 | 91TM10 | X | 1 | 3*1 | Max | ||
| 8085 | 91TM02 | X | 2 | 4*3 | Max | ||
| 8086 | DIP | 91TM03 | PM201 | 2 | X | 10 MHz | |
| 8088 | DIP | 91TM04 | PM201 | 2 | X | 10 MHz | |
| 80186 | LCC | 91TM05 | PM202 | 2 | X | 10 MHz | |
| 80188 | LCC | 91TM06 | PM202 | 2 | X | 10 MHz | |
| Motorola | |||||||
| 6800 | 91TM21 | X | 2 | 4*3 | Max | ||
| 6801 | 91TM28 | X | 2 | 4*3 | Max | ||
| 6802 | 91TM22 | X | 2 | 4*3 | Max | ||
| 6803 | 91TM29 | X | 2 | 4*3 | Max | ||
| 6805 | 91TM30 | UPIK 40 | 2 | 4*2 | Max | ||
| 6808 | 91TM23 | X | 2 | 4*3 | Max | ||
| 6809 | 91TM24 | X | 2 | 4*3 | Max | ||
| 68121 | 91TM32 | X | 2 | 4*3 | Max | ||
| 68000 | DIP | 91TM25 | PM203 | 2 | None | 12.5 MHz | |
| 68000 | PGA | 91TM25 | PM203 | 2 | None | 12.5 MHz | |
| 68008 | DIP | 91TM26 | PM203 | 2 | None | 8 MHz | |
| 68010 | DIP | 91TM27 | PM203 | 2 | None | 12.5 MHz | |
| 68010 | PGA | 91TM27 | PM203 | 2 | None | 12.5 MHz | |
| Zilog | |||||||
| Z-80 | 91TM41 | X | 2 | 4*1 | Max | ||
| Z8001/3 | 91TM42 | X | 3 | 4*3 | Max | ||
| Z8002/4 | 91TM43 | X | 3 | 3*3 | Max | ||
| Other microprocessors | |||||||
| 6502/C02 | 91TM63 | X | 2 | 4*2 | Max | ||
| 1802 | 91TM61 | X | 2 | 4*2 | Max | ||
| 1803 | 91TM65 | X | 2 | 4*2 | Max | ||
| F9450 | 91TM62 | X | 2 | 3*3 | Max | ||
| MIL-Std 1705A | 91TM64 | X | 2 | N/A | N/A | ||
| NSC800 | 91TM71 | X | 2 | 4*1 | Max | ||
| BUS | |||||||
| UNIBUS | 91TM51 | X | 2 | 4*3 | Max | ||
| Q-BUS | 91TM52 | X | 2 | 4*3 | Max | ||
| QPIB | 91TM53 | X | 1 | 3*3 | Max | ||
| ASCII | 91TM53 | X | 1 | 3*3 | Max | ||
| EBCDIC | 91TM53 | X | 1 | 3*3 | Max | ||
The following table gives the configuration for the PMA 100 Personality Module Adapter, which is an interface that connects PM1XX personality modules to the DAS9100.
- FM stands for full mnemonic disassembly.
- CM stands for control mnemonics.
- STD stands for standard radices (hex, binary, octal).
- DM means that the mnemonics may be developed using DAS mnemonics.
|
|
DAS9100 with PMA 100 | ||||
|---|---|---|---|---|---|
| Microprocessor | Support Feature | Probe adapter | Requires | Fastest clock supported | |
| Intel | |||||
| 8031 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
| 8035 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
| 8039 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
| 8048 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
| 8049 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
| 8051 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
| 8080 | FM, DM | PM101 | PM101 Opt 01 | ? | |
| 8085 | FM, DM | PM104 | X | 10 MHz | |
| 8086 | FM, DM | PM106 | X | 8 MHz | |
| 8088 | FM, DM | PM107 | X | 5 MHz | |
| 8748 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
| 8751 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
| Motorola | |||||
| 6800 | FM, DM | PM102 | X | 2 MHz | |
| 6801 | STD, DM | PM101 | 061-6000-00 Application manual | ? | |
| 6802 | FM, DM | PM103 | X | 6 MHz | |
| 6803 | STD, DM | PM101 | 061-6000-00 Application manual | ? | |
| 6808 | FM, DM | PM103 | X | 6 MHz | |
| 6809 | FM, DM | PM111 | X | 8 MHz | |
| 6809E | FM, DM | PM111 | X | 8 MHz | |
| 68000 | FM, DM | PM109 | X | 10 MHz | |
| Zilog | |||||
| Z80 | FM, DM | PM105 | X | 6 MHz | |
| Z8001 | FM, DM | PM110 | X | 6 MHz | |
| Z8002 | FM, DM | PM108 | X | 4 MHz | |
| Texas Instruments | |||||
| TMS9900 | STD, DM | PM101 | 061-6002-00 Application manual | ? | |
| Other microproscessor | |||||
| 1802 | STD, DM | PM101 | 061-6001-00 Application manual | ? | |
| 6502 | FM, DM | PM101 | PM101 Opt 02 | ? | |
| BUS | |||||
| MULTIBUS | CM, STD, DM | PM112 | X | ? | |
Tektronix 1240/1241
- In catalog 1984-1990
- All acquisition boards are the 18-channel 1240D2. The 9-channel 1240D1 cannot be used.
- If the UPIK 40 harness is listed it means that it is supported, but not required.
- (*1) means that P6460 probes are always required.
- (*2) means that P6460 probes are required for CMOS version.
- (*3) means that P6460 or P6462 probes can be used.
- PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
- There is a design for a multipurpose RAM/ROM pack, called SuperPack by Pavel Korensky. Note the errata in the README file.
- ROM Pack designations remain confusing. Not only do they use two conventions - "12RMXX" and "12RM99 Option XX" - but there is overlap and conflict between those for 8-bit CPUs and those for 16-bit CPUs e.g. 12RM01 appears to refer to both 8080 and 8086 support (see: Tektronix 1987 catalog p.121).
|
Tektronix 1240/1241 ROM pack and configuration table | ||||||
| Microprocessor | IC package | ROM pack | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | |
|---|---|---|---|---|---|---|---|
| Intel | |||||||
| 8080 | 12RM01 | N/A | 2 | 4X P6460 | Max | ||
| 8031/8051 | 12RM99 Opt 03 | UPIK 40 | 2 | 4X P6460 | 12 MHz | ||
| 8085 | 12RM02 | N/A | 2 | 4X P6460 or P6462 | Max | ||
| 8086 | DIP | 12RM03 | PM201 | 3 | N/A | 8.0 MHz | |
| 8088 | DIP | 12RM04 | PM201 | 3 | N/A | 8.0 MHz | |
| 80186 | LCC/PGA | 12RM05 | PM202 | 3 | N/A | 8.0 MHz | |
| 80188 | LCC/PGA | 12RM06 | PM202 | 3 | N/A | 8.0 MHz | |
| 80286 | LCC/PGA | 12RM08 | PM204 | 3 | N/A | 10.0 MHz | |
| 8096/7 | 12RM99 Opt 16 | N/A | 3 | 6X P6460 | 12 MHz | ||
| Motorola | |||||||
| 6800 | 12RM21 | N/A | 2 | 4X P6460 or P6462 | Max | ||
| 6801 | 12RM99 Opt 05 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
| 6802 | 12RM22 | N/A | 2 | 4X P6460 or P6462 | Max | ||
| 6805(E2) | 12RM99 Opt 06 | UPIK 40 | 2 | 2X P6460 | Max | ||
| 6805(E3) | 12RM99 Opt 07 | UPIK 40 | 2 | 3X P6460 | Max | ||
| 6808 | 12RM23 | N/A | 2 | 4X P6460 or P6462 | Max | ||
| 6809 | 12RM24 | X | 2 | 4X P6460 or P6462 | Max | ||
| 6809E | 12RM24 | N/A | 2 | 4X P6460 or P6462 | Max | ||
| 68HC11 | 12RM99 Opt 08 | N/A | 2 | 3X P6460 | Max | ||
| 68000 | DIP | 12RM25 | PM203 | 3 | N/A | 16 MHz | |
| 68000 | PGA | 12RM25 | PM203 | 3 | N/A | 16 MHz | |
| 68008 | DIP | 12RM26 | PM203 | 3 | N/A | 16 MHz | |
| 68010 | DIP | 12RM27 | PM203 | 3 | N/A | 16 MHz | |
| 68010 | PGA | 12RM27 | PM203 | 3 | N/A | 16 MHz | |
| 68020 | 12RM31 | PM205 | 3 | N/A | 25.0 MHz | ||
| 68030 | 12RM33 | ? | 3 | N/A | 25.0 MHz | ||
| DSP56000/1 | 12RM99 Opt 17 | N/A | 3 | 6X P6460 | 50 MHz | ||
| Zilog | |||||||
| Z-80 | 12RM41 | N/A | 2 | 4X P6460 | 8 MHz | ||
| Z-80 | 12RM07 | N/A | 2 | 4X P6460 | 8 MHz | ||
| Z8001/3 | 12RM42 | N/A | 3 | 4X P6460 or P6462 | 10 MHz | ||
| Z8002/4 | 12RM43 | N/A | 3 | 3*3 | 10 MHz | ||
| Texas Instruments | |||||||
| TMS320320/320C25 | 12RM99 Opt 11 | N/A | 3 | 5X P6460 | 20 MHz | ||
| TMS32010 | 12RM99 Opt 14 | UPIK 40 | 2 | 4X P6460 | Max | ||
| Hitachi | |||||||
| 6301/3 | 12RM99 Opt 09 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
| 64180R0/R1 | 12RM99 Opt 12 | N/A | 3 | 5X P6460 | Max | ||
| Other microprocessors | |||||||
| 6502 | 12RM63 | N/A | 2 | 4*2 | Max | ||
| 65C02 | 12RM63 | N/A | 2 | 4*2 | Max | ||
| RCA 1802/4/5/6/(A/C/AC/BC) | 12RM99 Opt 22 | UPIK 40 | 2 | 3X P6460 | Max | ||
| Analog Devices ADSP2100 | 12RM99 Opt 17 | N/A | 3 | 6X P6460 | Max | ||
| Fairchild F9450 | 12RM62A | N/A | 3 | 3*3 | 40 MHz | ||
| MIL-Std 1705A | ? | ? | ? | ? | 40 MHz | ||
| National Semiconductor NSC800 | 12RM71 | N/A | 2 | 4X P6460 | Max | ||
| National Semiconductor NSC800 | 12RM09 | N/A | 2 | 4X P6460 | Max | ||
| GM EMC | 12RM99 Opt 01 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
| Other | |||||||
| VAXBI | 12RM99 Opt 13 | 012-1164-00 | 3 | 6*3 | Max | ||
| GPIB | 12RM99 Opt 04 | 103-0209-00 | 2 | 2*3 | Max | ||
Tektronix DAS9200
- Introduced 1987
- (*1) 92A60 or 92A90 pobes can be used.
- (*2) Only 92A90 probes can be used.
- See the 1993 Tektronix catalog page 155-157 for the full list
.jpg)
|
Tetkronix DAS9200 | |||||
|---|---|---|---|---|---|---|
| Microprocessor | IC package | Software | Probe adapter | Probe required | Fastest clock supported | |
| Intel | ||||||
| 8085 | 92DM02 | 92DM02 | *1 | Max | ||
| 8086 | DIP | 92DM03 | 92DM03 | *1 | Max | |
| 8088 | DIP | 92DM04 | 92DM04 | *1 | Max | |
| 80186 | LCC/PGA | 92DM05 | 92DM05 | *1 | Max | |
| 80188 | LCC/PGA | 92DM06 | 92DM06 | *1 | Max | |
| 80286 | LCC/PGA | 92DM08 | 92DM08 | *1 | Max | |
| 80386 | 92DM09 | 92DM09 | *2 | Max | ||
| Motorola | ||||||
| 6809 | 92DM24 | 92DM24 | *1 | Max | ||
| 6809E | 92DM24 | 92DM24 | NA | Max | ||
| 68000 | DIP | 92DM25, or 92DM27 | 92DM25, or 92DM27 | *1 | Max | |
| 68000 | PGA | 91TM27 | ? | *1 | Max | |
| 68010 | DIP | 92DM27 | 92DM27 | *1 | Max | |
| 68010 | PGA | 91TM27 | ? | *1 | Max | |
| 68020 | 92DM31 | 92DM31 | *2 | Max | ||
| 68030 | 92DM33 | 92DM33 | ? | ? | ||
| 68040 | ? | ? | ? | ? | ||
| Zilog | ||||||
| Z-80 | 92DM41 | 92DM41 | *1 | Max | ||
| Other microprocessors | ||||||
| F9450 | 92DM64 | Use 92DM64 with option 13 for non-MMU, else use without. | *1 | Max | ||
| 1705A | 92DM64 | Need adapter for emulator PIAs | *1 | 40 MHz | ||
Tektronix 1225/1220
- In catalog 1988
- Note that the configuration table for the 1230 is not the same as the one for the 1240/1241.
The internal hardware is different enough that the 1225/1220 can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
|
Tektronix 1225/1220 | ||
|---|---|---|---|
| Microprocessor | Probe adapter | Fastest clock supported | |
| Intel | |||
| 8085 | PM404 | Max | |
| 8086 | PM411 | ||
| 8088 | PM411 | ||
| Motorola | |||
| 6800 | PM407 | ||
| 6802 | PM407 | ||
| 6809 | PM406 | Max | |
| 6809E | PM406 | Max | |
| 68000 | PM412 | ||
| Zilog | |||
| Z80 | PM402 | Max | |
| Other Microprocessor | |||
| 6502/C02 | PM403 | Max | |
| Other | |||
| STD | PM405 | Max | |
Tektronix 1205
- In catalog 1988-1989
|
Tektronix 1205 | |||||
|---|---|---|---|---|---|---|
| Microprocessor | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | ||
| Zilog | ||||||
| Z80 | PM302 | X | None | 4 MHz | ||
| Other | ||||||
| 6502/C02 | PM303 | X | None | 4 MHz | ||
| General | PM301 | X | None | 4 MHz | ||
Tektronix 1230
- In catalog 1989-1993
- The 1230DPA is required for all DPXXXX probes.
- All acquisition boards are 1230E1.
- All of the needed software is included with the personality module.
Note from operators manual:
DISASSEMBLY DISPLAY
Microprocessor disassembly is an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it. Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in the operator's manual for each microprocessor disassembly probe.
|
Tektronix 1230 | |||||
|---|---|---|---|---|---|---|
| Microprocessor | IC package | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | |
| Intel | ||||||
| 8031/8051 | DIP | DP8031D | 2 | None | 12 MHz | |
| 8085 | DIP | PM404 | 2 | None | 6 MHz | |
| 8086 | DIP | PM411,DP8086D | 3 | None | 10 MHz | |
| 8087 | DIP | DP8031D DP8086D | ? | None | ? | |
| 8088 | DIP | PM411,DP8086D | 3 | None | 10 MHz | |
| 80186 | PGA | DP186P | 3 | None | 10 MHz | |
| 80188 | PGA | DP186P | 3 | None | 10 MHz | |
| 8096/7 | PLCC | DP96PL | 3 | None | 12 MHz | |
| 80C196 | PLCC | DP96PL | 3 | None | 12 MHz | |
| 80286 | PGA | DP286PL | 3 | None | 12.5 MHz | |
| 80287 | PGA | DP286PL | 3 | None | 12.5 MHz | |
| 80286 | PLCC | DP286P | 3 | None | 12.5 MHz | |
| 80287 | PLCC | DP286P | 3 | None | 12.5 MHz | |
| 80386SX | PQFP | DP386SX | 3 | None | 16 MHz | |
| 80387SX | PQFP | DP386SX | 3 | None | 16 MHz | |
| Motorola | ||||||
| 6800 | DIP | PM407 | 2 | None | Max | |
| 6802 | DIP | PM407 | 2 | None | Max | |
| 6809 | DIP | PM406 | 2 | None | 2 MHz | |
| 6809E | DIP | PM406 | 2 | None | 2 MHz | |
| 68HC11 | All | DPHC11Q | 2 | None | 12 MHz | |
| 68000 | DIP | PM412,DP68KD | 3 | None | 16 MHz | |
| 68000 | PGA | DP68KP | 3 | None | 16 MHz | |
| 68010 | DIP | DP68KD | 3 | None | 16 MHz | |
| 68010 | PGA | DP68KP | 3 | None | 16 MHz | |
| Zilog | ||||||
| Z-80 | DIP | PM402 | 2 | None | Max | |
| Other Microprocessors | ||||||
| 6502/C02 | DIP | PM403 | 2 | None | Max | |
| Other | ||||||
| STD | PM405 | 2 | None | 12.5 MHz | ||
| GPIB | DPGPIB | Any | None | 10 MHz | ||
| RS-232 | A6740G | Any | None | 19.2 K baud | ||
Tektronix Prism 3002
- Introduced 1990
Tektronix 3001 GPX
- Introduced 1993
- To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM.
Tektronix TLA 700
- Introduced 1997-1998