Microprocessor support table
These tables describe the configurations necessary for specific microprocessors on Tektronix logic analyzers.
Those analyzers not providing any specific target support (i.e. connection, disassembly) are listed as a matter of chronology and convenience for the reader.
"N/A" means that the option is not applicable; "?" means that no information has been found to date.
"Max" means that it supports the maximum speed for the processor.
Tektronix 7D01
- Introduced 1977
- No microprocessor support.
Sony/Tektronix 308 Data Analyzer
- Introduced 1980
- No microprocessor support
Tektronix 7D02
Note:
- The PM101 is a general purpose probe, it can be defined to work with processors not listed here.
- "FM" stands for Full mnemonic disassembly.
- "STD" stands for Standard radices (Hex, Bin, Octal).
- In production 1981-1984.
![]() |
Tektronix 7D02 | ||||
---|---|---|---|---|---|
Microprocessor | Support Feature | Probe adapter | Requires | Fastest clock supported | |
Intel | |||||
8031 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
8035 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
8039 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
8048 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
8049 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
8051 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
8080 | FM | PM101 | PM101 Opt 01 | 20 MHz | |
8085 | FM | PM104 | X | 10 MHz | |
8086 | FM | PM106 | X | 8 MHz | |
8088 | FM | PM107 | X | 5 MHz | |
8748 | STD | PM101 | 061-5999-00 Application manual | 20 MHz | |
8751 | STD | PM101 | 061-6003-00 Application manual | 20 MHz | |
Motorola | |||||
6800 | FM | PM102 | X | 2 MHz | |
6801 | STD | PM101 | 061-6000-00 Application manual | 20 MHz | |
6802 | FM | PM103 | X | 6 MHz | |
6803 | STD | PM101 | 061-6000-00 Application manual | 20 MHz | |
6808 | FM | PM103 | X | 6 MHz | |
6809 | FM | PM111 | X | 8 MHz | |
6809E | FM | PM111 | X | 8 MHz | |
68000 | FM | PM109 | X | 10 MHz | |
Zilog | |||||
Z-80 | FM | PM105 | X | 6 MHz | |
Z8001 | FM | PM110 | X | 6 MHz | |
Z8002 | FM | PM108 | X | 4 MHz | |
Texas Instruments | |||||
TMS9900 | STD | PM101 | 061-6002-00 Application manual | 20 MHz | |
Other microproscessor | |||||
1802 | STD | PM101 | 061-6001-00 Application manual | 20 MHz | |
6502 | FM | PM101 | PM101 Opt 02 | 20 MHz | |
Other | |||||
MULTIBUS | STD | PM112 | X | 5 MHz |
Tektronix DAS9100
See 91TMXX tapes for information on tapes. Note:
- Introduced 1982
- All acquisition boards are either 91A24 or 91AE24.
- If the UPIK 40 harness is listed it means that it is supported, but not required.
- (*1) means that P6460 probes are always required.
- (*2) means that P6460 probes are required for CMOS version.
- (*3) means that P6460 or P6462 probes can be used.
- PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
![]() |
Tektronix DAS9100 | ||||||
---|---|---|---|---|---|---|---|
Microprocessor | IC package | Mnemonic tape | Probe adapter | Acq.Boards required | Acq.Probes required | Fastest clock supported | |
Intel | |||||||
8080 | 91TM01 | X | 2 | 4*3 | Max | ||
8031 | 91TM07 | X | 2 | 4*1 | Max | ||
8039 | 91TM10 | X | 1 | 3*1 | Max | ||
8085 | 91TM02 | X | 2 | 4*3 | Max | ||
8086 | DIP | 91TM03 | PM201 | 2 | X | 10 MHz | |
8088 | DIP | 91TM04 | PM201 | 2 | X | 10 MHz | |
80186 | LCC | 91TM05 | PM202 | 2 | X | 10 MHz | |
80188 | LCC | 91TM06 | PM202 | 2 | X | 10 MHz | |
Motorola | |||||||
6800 | 91TM21 | X | 2 | 4*3 | Max | ||
6801 | 91TM28 | X | 2 | 4*3 | Max | ||
6802 | 91TM22 | X | 2 | 4*3 | Max | ||
6803 | 91TM29 | X | 2 | 4*3 | Max | ||
6805 | 91TM30 | UPIK 40 | 2 | 4*2 | Max | ||
6808 | 91TM23 | X | 2 | 4*3 | Max | ||
6809 | 91TM24 | X | 2 | 4*3 | Max | ||
68121 | 91TM32 | X | 2 | 4*3 | Max | ||
68000 | DIP | 91TM25 | PM203 | 2 | None | 12.5 MHz | |
68000 | PGA | 91TM25 | PM203 | 2 | None | 12.5 MHz | |
68008 | DIP | 91TM26 | PM203 | 2 | None | 8 MHz | |
68010 | DIP | 91TM27 | PM203 | 2 | None | 12.5 MHz | |
68010 | PGA | 91TM27 | PM203 | 2 | None | 12.5 MHz | |
Zilog | |||||||
Z-80 | 91TM41 | X | 2 | 4*1 | Max | ||
Z8001/3 | 91TM42 | X | 3 | 4*3 | Max | ||
Z8002/4 | 91TM43 | X | 3 | 3*3 | Max | ||
Other microprocessors | |||||||
6502/C02 | 91TM63 | X | 2 | 4*2 | Max | ||
1802 | 91TM61 | X | 2 | 4*2 | Max | ||
1803 | 91TM65 | X | 2 | 4*2 | Max | ||
F9450 | 91TM62 | X | 2 | 3*3 | Max | ||
MIL-Std 1705A | 91TM64 | X | 2 | N/A | N/A | ||
NSC800 | 91TM71 | X | 2 | 4*1 | Max | ||
BUS | |||||||
UNIBUS | 91TM51 | X | 2 | 4*3 | Max | ||
Q-BUS | 91TM52 | X | 2 | 4*3 | Max | ||
QPIB | 91TM53 | X | 1 | 3*3 | Max | ||
ASCII | 91TM53 | X | 1 | 3*3 | Max | ||
EBCDIC | 91TM53 | X | 1 | 3*3 | Max |
The following table gives the configuration for the PMA 100 Personality Module Adapter, which is an interface that connects PM1XX personality modules to the DAS9100.
- FM stands for full mnemonic disassembly.
- CM stands for control mnemonics.
- STD stands for standard radices (hex, binary, octal).
- DM means that the mnemonics may be developed using DAS mnemonics.
![]() |
DAS9100 with PMA 100 | ||||
---|---|---|---|---|---|
Microprocessor | Support Feature | Probe adapter | Requires | Fastest clock supported | |
Intel | |||||
8031 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
8035 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
8039 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
8048 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
8049 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
8051 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
8080 | FM, DM | PM101 | PM101 Opt 01 | ? | |
8085 | FM, DM | PM104 | X | 10 MHz | |
8086 | FM, DM | PM106 | X | 8 MHz | |
8088 | FM, DM | PM107 | X | 5 MHz | |
8748 | STD, DM | PM101 | 061-5999-00 Application manual | ? | |
8751 | STD, DM | PM101 | 061-6003-00 Application manual | ? | |
Motorola | |||||
6800 | FM, DM | PM102 | X | 2 MHz | |
6801 | STD, DM | PM101 | 061-6000-00 Application manual | ? | |
6802 | FM, DM | PM103 | X | 6 MHz | |
6803 | STD, DM | PM101 | 061-6000-00 Application manual | ? | |
6808 | FM, DM | PM103 | X | 6 MHz | |
6809 | FM, DM | PM111 | X | 8 MHz | |
6809E | FM, DM | PM111 | X | 8 MHz | |
68000 | FM, DM | PM109 | X | 10 MHz | |
Zilog | |||||
Z80 | FM, DM | PM105 | X | 6 MHz | |
Z8001 | FM, DM | PM110 | X | 6 MHz | |
Z8002 | FM, DM | PM108 | X | 4 MHz | |
Texas Instruments | |||||
TMS9900 | STD, DM | PM101 | 061-6002-00 Application manual | ? | |
Other microproscessor | |||||
1802 | STD, DM | PM101 | 061-6001-00 Application manual | ? | |
6502 | FM, DM | PM101 | PM101 Opt 02 | ? | |
BUS | |||||
MULTIBUS | CM, STD, DM | PM112 | X | ? |
Tektronix 1240/1241
- Introduced 1984
- All acquisition boards are the 18-channel 1240D2. The 9-channel 1240D1 cannot be used.
- If the UPIK 40 harness is listed it means that it is supported, but not required.
- (*1) means that P6460 probes are always required.
- (*2) means that P6460 probes are required for CMOS version.
- (*3) means that P6460 or P6462 probes can be used.
- PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
- There is a design for a multipurpose RAM/ROM pack, called SuperPack by Pavel Korensky. Note the errata in the README file.
- ROM Pack designations remain confusing. Not only do they use two conventions - "12RMXX" and "12RM99 Option XX" - but there is overlap and conflict between those for 8-bit CPUs and those for 16-bit CPUs e.g. 12RM01 appears to refer to both 8080 and 8086 support (see: Tektronix 1987 catalog p.121).
![]() |
Tektronix 1240/1241 ROM pack and configuration table | ||||||
Microprocessor | IC package | ROM pack | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | |
---|---|---|---|---|---|---|---|
Intel | |||||||
8080 | 12RM01 | N/A | 2 | 4X P6460 | Max | ||
8031/8051 | 12RM99 Opt 03 | UPIK 40 | 2 | 4X P6460 | 12 MHz | ||
8085 | 12RM02 | N/A | 2 | 4X P6460 or P6462 | Max | ||
8086 | DIP | 12RM03 | PM201 | 3 | N/A | 8.0 MHz | |
8088 | DIP | 12RM04 | PM201 | 3 | N/A | 8.0 MHz | |
80186 | LCC/PGA | 12RM05 | PM202 | 3 | N/A | 8.0 MHz | |
80188 | LCC/PGA | 12RM06 | PM202 | 3 | N/A | 8.0 MHz | |
80286 | LCC/PGA | 12RM08 | PM204 | 3 | N/A | 10.0 MHz | |
8096/7 | 12RM99 Opt 16 | N/A | 3 | 6*1 | 12 MHz | ||
Motorola | |||||||
6800 | 12RM21 | N/A | 2 | 4X P6460 or P6462 | Max | ||
6801 | 12RM99 Opt 05 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
6802 | 12RM22 | N/A | 2 | 4X P6460 or P6462 | Max | ||
6805(E2) | 12RM99 Opt 06 | UPIK 40 | 2 | 2*1 | Max | ||
6805(E3) | 12RM99 Opt 07 | UPIK 40 | 2 | 3*1 | Max | ||
6808 | 12RM23 | N/A | 2 | 4X P6460 or P6462 | Max | ||
6809 | 12RM24 | X | 2 | 4X P6460 or P6462 | Max | ||
6809E | 12RM24 | N/A | 2 | 4X P6460 or P6462 | Max | ||
68HC11 | 12RM99 Opt 08 | N/A | 2 | 3*1 | Max | ||
68000 | DIP | 12RM25 | PM203 | 3 | None | 16 MHz | |
68000 | PGA | 12RM25 | PM203 | 3 | None | 16 MHz | |
68008 | DIP | 12RM26 | PM203 | 3 | None | 16 MHz | |
68010 | DIP | 12RM27 | PM203 | 3 | None | 16 MHz | |
68010 | PGA | 12RM27 | PM203 | 3 | None | 16 MHz | |
68020 | 12RM31 | PM205 | 3 | None | 25.0 MHz | ||
68030 | 12RM33 | ? | 3 | None | 25.0 MHz | ||
DSP56000/1 | 12RM99 Opt 17 | N/A | 3 | 6*1 | 50 MHz | ||
Zilog | |||||||
Z-80 | 12RM41 | N/A | 2 | 4X P6460 | 8 MHz | ||
Z-80 | 12RM07 | N/A | 2 | 4X P6460 | 8 MHz | ||
Z8001/3 | 12RM42 | N/A | 3 | 4X P6460 or P6462 | 10 MHz | ||
Z8002/4 | 12RM43 | N/A | 3 | 3*3 | 10 MHz | ||
Texas Instruments | |||||||
TMS320320/320C25 | 12RM99 Opt 11 | N/A | 3 | 5*1 | 20 MHz | ||
TMS32010 | 12RM99 Opt 14 | UPIK 40 | 2 | 4X P6460 | Max | ||
Hitachi | |||||||
6301/3 | 12RM99 Opt 09 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
64180R0/R1 | 12RM99 Opt 12 | N/A | 3 | 5*1 | Max | ||
Other microprocessors | |||||||
6502 | 12RM63 | N/A | 2 | 4*2 | Max | ||
65C02 | 12RM63 | N/A | 2 | 4*2 | Max | ||
RCA 1802/4/5/6/(A/C/AC/BC) | 12RM99 Opt 22 | UPIK 40 | 2 | 3*1 | Max | ||
Analog Devices ADSP2100 | 12RM99 Opt 17 | N/A | 3 | 6*1 | Max | ||
Fairchild F9450 | 12RM62A | N/A | 3 | 3*3 | 40 MHz | ||
MIL-Std 1705A | ? | ? | ? | ? | 40 MHz | ||
National Semiconductor NSC800 | 12RM71 | N/A | 2 | 4X P6460 | Max | ||
National Semiconductor NSC800 | 12RM09 | N/A | 2 | 4X P6460 | Max | ||
GM EMC | 12RM99 Opt 01 | UPIK 40 | 2 | 4X P6460 or P6462 | Max | ||
Other | |||||||
VAXBI | 12RM99 Opt 13 | 012-1164-00 | 3 | 6*3 | Max | ||
GPIB | 12RM99 Opt 04 | 103-0209-00 | 2 | 2*3 | Max |
Tektronix DAS9200
- Introduced 1987
- (*1) 92A60 or 92A90 pobes can be used.
- (*2) Only 92A90 probes can be used.
- See the 1993 Tektronix catalog page 155-157 for the full list
![]() |
Tetkronix DAS9200 | |||||
---|---|---|---|---|---|---|
Microprocessor | IC package | Software | Probe adapter | Probe required | Fastest clock supported | |
Intel | ||||||
8085 | 92DM02 | 92DM02 | *1 | Max | ||
8086 | DIP | 92DM03 | 92DM03 | *1 | Max | |
8088 | DIP | 92DM04 | 92DM04 | *1 | Max | |
80186 | LCC/PGA | 92DM05 | 92DM05 | *1 | Max | |
80188 | LCC/PGA | 92DM06 | 92DM06 | *1 | Max | |
80286 | LCC/PGA | 92DM08 | 92DM08 | *1 | Max | |
80386 | 92DM09 | 92DM09 | *2 | Max | ||
Motorola | ||||||
6809 | 92DM24 | 92DM24 | *1 | Max | ||
6809E | 92DM24 | 92DM24 | NA | Max | ||
68000 | DIP | 92DM25, or 92DM27 | 92DM25, or 92DM27 | *1 | Max | |
68000 | PGA | 91TM27 | ? | *1 | Max | |
68010 | DIP | 92DM27 | 92DM27 | *1 | Max | |
68010 | PGA | 91TM27 | ? | *1 | Max | |
68020 | 92DM31 | 92DM31 | *2 | Max | ||
68030 | 92DM33 | 92DM33 | ? | ? | ||
68040 | ? | ? | ? | ? | ||
Zilog | ||||||
Z-80 | 92DM41 | 92DM41 | *1 | Max | ||
Other microprocessors | ||||||
F9450 | 92DM64 | Use 92DM64 with option 13 for non-MMU, else use without. | *1 | Max | ||
1705A | 92DM64 | Need adapter for emulator PIAs | *1 | 40 MHz |
Tektronix 1225/1220
- Introduced 1988
- Note that the configuration table for the 1230 is not the same as the one for its two predecessors.
The internal hardware is different enough that the 1225/1220 can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
Tektronix 1225/1220 | |||
---|---|---|---|
Microprocessor | Probe adapter | Fastest clock supported | |
Intel | |||
8085 | PM404 | Max | |
8086 | PM411 | ||
8088 | PM411 | ||
Motorola | |||
6800 | PM407 | ||
6802 | PM407 | ||
6809 | PM406 | Max | |
6809E | PM406 | Max | |
68000 | PM412 | ||
Zilog | |||
Z80 | PM402 | Max | |
Other Microprocessor | |||
6502/C02 | PM403 | Max | |
Other | |||
STD | PM405 | Max |
Tektronix 1205
- Introduced 1988
![]() |
Tektronix 1205 | |||||
---|---|---|---|---|---|---|
Microprocessor | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | ||
Zilog | ||||||
Z80 | PM302 | X | None | 4 MHz | ||
Other | ||||||
6502/C02 | PM303 | X | None | 4 MHz | ||
General | PM301 | X | None | 4 MHz |
Tektronix 1230
- Introduced 1989
- The 1230DPA is required for all DPXXXX probes.
- All acquisition boards are 1230E1.
- All of the needed software is included with the personality module.
![]() |
Tektronix 1230 | |||||
---|---|---|---|---|---|---|
Microprocessor | IC package | Probe adapter | Acq. boards required | Acq. probes required | Fastest clock supported | |
Intel | ||||||
8031/8051 | DIP | DP8031D | 2 | None | 12 MHz | |
8085 | DIP | PM404 | 2 | None | 6 MHz | |
8086 | DIP | DP8086D | 3 | None | 10 MHz | |
8087 | DIP | DP8031D DP8086D | ? | None | ? | |
8088 | DIP | DP8086D | 3 | None | 10 MHz | |
80186 | PGA | DP186P | 3 | None | 10 MHz | |
80188 | PGA | DP186P | 3 | None | 10 MHz | |
8096/7 | PLCC | DP96PL | 3 | None | 12 MHz | |
80C196 | PLCC | DP96PL | 3 | None | 12 MHz | |
80286 | PGA | DP286PL | 3 | None | 12.5 MHz | |
80287 | PGA | DP286PL | 3 | None | 12.5 MHz | |
80286 | PLCC | DP286P | 3 | None | 12.5 MHz | |
80287 | PLCC | DP286P | 3 | None | 12.5 MHz | |
80386SX | PQFP | DP386SX | 3 | None | 16 MHz | |
80387SX | PQFP | DP386SX | 3 | None | 16 MHz | |
Motorola | ||||||
6800 | DIP | PM407 | 2 | None | Max | |
6802 | DIP | PM407 | 2 | None | Max | |
6809 | DIP | PM406 | 2 | None | 2 MHz | |
6809E | DIP | PM406 | 2 | None | 2 MHz | |
68HC11 | All | DPHC11Q | 2 | None | 12 MHz | |
68000 | DIP | DP68KD | 3 | None | 16 MHz | |
68000 | PGA | DP68KP | 3 | None | 16 MHz | |
68010 | DIP | DP68KD | 3 | None | 16 MHz | |
68010 | PGA | DP68KP | 3 | None | 16 MHz | |
Zilog | ||||||
Z-80 | DIP | PM402 | 2 | None | Max | |
Other Microprocessors | ||||||
6502/C02 | DIP | PM403 | 2 | None | Max | |
Other | ||||||
STD | PM405 | 2 | None | 12.5 MHz | ||
GPIB | DPGPIB | Any | None | 10 MHz | ||
RS-232 | A6740G | Any | None | 19.2 K baud |
Tektronix Prism 3002
- Introduced 1990