531: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(26 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |
{{Oscilloscope Sidebar
title=Tektronix 531|
|manufacturer=Tektronix
summary=10 MHz scope |
|series=5000-series scopes
image=Tek 531a g front.jpg |
|model=531
caption=Tektronix 531 |
|summary=10 MHz oscilloscope
introduced=1954 |
|image=Tek 531a g front.jpg
discontinued=1973 |
|caption=Tektronix 531
manuals=
|introduced=1954
* [http://bama.edebris.com/download/tek/531_541/531_541.djvu Tektronix 531/541 Manual (DjVu)]
|discontinued=1973
* [http://w140.com/mmm/tek-531-541.pdf Tektronix 531/541 Manual (PDF)]
|designers=Dick Rhiger
* [http://w140.com/tek_fcp/tek_type_531_factory_cal_proc.pdf Tektronix 531 Factory Calibration Procedure (PDF)]
|manuals=
* [http://w140.com/tek_fcp/tek_type_531a_factory_cal_proc.pdf Tektronix 531A Factory Calibration Procedure (PDF)]
'''531'''
* [[Media:070-203.pdf|Tektronix 531/541 Manual]] (OCR)
* [[Media:tek_531_fcp.pdf|531 Factory Calibration Procedure]] (OCR)


* [[Media:tek_531_fcp.pdf|Tektronix 531 Factory Calibration Procedure (PDF, OCR)]]
'''531A'''
* [[Media:070-301.pdf|Tektronix RM31A Manual]]
* [[Media:tek_531a_fcp.pdf|531A Factory Calibration Procedure]] (OCR)
* [[Media:Tek 531a fcp feb 1968.pdf|531A Factory Calibration Procedure, February 1968]]
* [[Media:Tek 531a mods.pdf|Tektronix 531A Modifications]]
}}
}}
The '''Tektronix Type 531''' is a 10 MHz oscilloscope that accepts [[letter-series and 1-series plug-ins]].
The '''Tektronix Type 531''' is a 10 MHz oscilloscope that accepts [[letter-series and 1-series plug-ins]].
It is exactly like Type [[535]] except it does not have the Delayed Sweep (dual timebase) feature.
It is exactly like Type [[535]] except it does not have the Delayed Sweep (dual timebase) feature.
The designer was [[Dick Rhiger]].


The 531 and 535 were the first Tektronix scopes to accept plug-ins.
The 531 and 535 were the first Tektronix scopes to accept plug-ins.
Line 23: Line 30:
which has more convenient controls and a slightly faster (15 MHz) vertical amplifier.
which has more convenient controls and a slightly faster (15 MHz) vertical amplifier.


531s with below S/N 7950 have DuMont [[154-081|5BGP2]] instead of Tektronix [[T5330|T533P2]].
In serial numbers 101 to 7600, the 531's L-C [[delay line]] is in the middle of the vertical amplifier.   
 
In serial numbers 101 to 7600, the 531's L-C [[delay line]] is before the vertical amplifier.   
In serial numbers 7601 and up, the 531's delay line is between the vertical amplifier and the CRT.
In serial numbers 7601 and up, the 531's delay line is between the vertical amplifier and the CRT.
This change was the result of [[John Kobbe]]'s insight that if the far end of the delay line was an open circuit (which the CRT approximates),
This change was the result of [[John Kobbe]]'s insight that if the far end of the delay line was an open circuit (which the CRT approximates),
the reflected wave could be absorbed at the source end.
the reflected wave could be absorbed at the source end.
This "single termination" approach made it possible to do away with the output chassis.
This "single termination" approach made it possible to do away with the input chassis.
All Tek scopes using a lumped-constant delay line went to this topology.
All subsequent Tek scopes with a lumped-constant delay line used this topology.


There is also a rack-mount version, Types RM31 and RM31A.
There is also a rack-mount version, Types RM31 and RM31A.
Line 36: Line 41:


The [[532]] is similar to the 531, but designed to be more reliable at the expense of slower risetime.
The [[532]] is similar to the 531, but designed to be more reliable at the expense of slower risetime.
The [[541]] is mostly the same as the 531, but has a [[distributed amplifier|distributed vertical amplifier]] and a different CRT.
The [[541]] is mostly the same as the 531, but has a [[distributed amplifier|distributed vertical amplifier]]  
for 30 MHz bandwidth, and a different CRT.


==Specifications==
{{BeginSpecs}}
{{SpecGroup | 531 SN 101-7600}}
{{Spec | Bandwidth | DC to 10 MHz (≤ 3 dB) with [[A|Type A plug-in]]  }}
{{Spec | Rise time | 0.035 μs }}
{{SpecGroup | 531 SN 7601 up  & 531A}}
{{Spec | Bandwidth | DC to 15 MHz (≤ 3 dB) with [[K|Type K plug-in]]  }}
{{Spec | Rise time | 0.024 μs }}
{{SpecGroup | all}}
{{Spec | Line Voltage | 108/115/122/216/244 V<sub>AC</sub> ±10%,selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz. }}
{{Spec | Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }}
{{Spec | Power Consumption | 475W with  plug-in }}
{{Spec | Cooling  | AC Fan }}
{{Spec | Trigger Modes | AC/DC/AC LF Reject, and HF Sync}}
{{Spec | Anode Potential | 10 kV (relative to cathode)}}
{{Spec | Screen Area | 6 cm × 10 cm}}
{{Spec | Construction  | Aluminum alloy chassis. Anodized front panel}}
{{Spec | Weight| 61,5 lbs / 27,8 kg }}
{{EndSpecs}}


[[Category:Specifications needed]] ''please add''
==Links==
{{Documents|Link=531}}
{{Documents|Link=531A}}


==Pictures==
==Pictures==
===531===
<gallery>
531_early_1.jpg        | early 531 with [[C|Type 53C]]
Tek 531 brown 1.jpg    | Brown-era 531 with [[CA|Type CA]]
Tek 531 brown 2.jpg    | Brown-era 531 with [[CA|Type CA]]
Tek 531 brown 3.jpg    | Brown-era 531 Rear
</gallery>
===531A===
<gallery>
<gallery>
Tek 531a g front.jpg
Tek 531a g front.jpg
531_early_1.jpg         | early 531
Tek 531a trace.jpg
Tek 531a on cart.JPG    | 531A on [[202]] cart
Tek 531a on cart.jpg    | 531A on [[500]]/[[53]]cart
Tek 531a 34 pr.jpg      | 531A Overwiev
Tek 531a front.jpg      | 531A Front
Tek 531a right top.jpg  | 531A Timebase ciruit
Tek 531a right2.jpg    | 531A Power supply
Tek 531a right 3.jpg    | 531A Rectifier board
Tek 531a right.jpg      | 531A Inside left
Tek 531a left close.jpg | 531A Vertical amplifier
Tek 531a left.jpg      | 531A Inside right
Tek 531a manual compartment.jpg | manual compartment
</gallery>
 
===RM31A===
<gallery>
rm31a.jpg              | RM31A
rm31a.jpg              | RM31A
Tek 531a on cart.JPG    | 531A on cart
Tek 531a 34 pr.jpg      | 531A
Tek 531a front.jpg      | 531A
Tek 531a right top.jpg  | 531A
Tek 531a right2.jpg    | 531A
Tek 531a right 3.jpg    | 531A
Tek 531a right.jpg      | 531A
Tek 531a left close.jpg | 531A
Tek 531a left.jpg      | 531A
Tek 531 brown 1.jpg | Brown-era 531 with [[CA|Type CA]]
Tek 531 brown 2.jpg | Brown-era 531 with [[CA|Type CA]]
Tek 531 brown 3.jpg | Brown-era 531 Rear
Tek 531a on cart.jpg|531A on cart
Tek 531a manual compartment.jpg
</gallery>
</gallery>
==Components==
{{Parts|531}}
{{Parts|531A}}
{{Parts|RM31A}}


[[Category:500 series scopes]]
[[Category:500 series scopes]]

Latest revision as of 11:43, 1 July 2024

Tektronix 531
10 MHz oscilloscope
Tektronix 531

Produced from 1954 to 1973

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type 531 is a 10 MHz oscilloscope that accepts letter-series and 1-series plug-ins. It is exactly like Type 535 except it does not have the Delayed Sweep (dual timebase) feature.

The designer was Dick Rhiger.

The 531 and 535 were the first Tektronix scopes to accept plug-ins. It was introduced in March 1954 simultaneously with the Type 535, and superseded in 1959 by the Type 531A, which has more convenient controls and a slightly faster (15 MHz) vertical amplifier.

In serial numbers 101 to 7600, the 531's L-C delay line is in the middle of the vertical amplifier. In serial numbers 7601 and up, the 531's delay line is between the vertical amplifier and the CRT. This change was the result of John Kobbe's insight that if the far end of the delay line was an open circuit (which the CRT approximates), the reflected wave could be absorbed at the source end. This "single termination" approach made it possible to do away with the input chassis. All subsequent Tek scopes with a lumped-constant delay line used this topology.

There is also a rack-mount version, Types RM31 and RM31A. They have a sliding chassis so that the scope can be serviced without removing it from a rack.

The 532 is similar to the 531, but designed to be more reliable at the expense of slower risetime. The 541 is mostly the same as the 531, but has a distributed vertical amplifier for 30 MHz bandwidth, and a different CRT.

Key Specifications

     — 531 SN 101-7600 —
Bandwidth DC to 10 MHz (≤ 3 dB) with Type A plug-in
Rise time 0.035 μs
     — 531 SN 7601 up & 531A —
Bandwidth DC to 15 MHz (≤ 3 dB) with Type K plug-in
Rise time 0.024 μs
     — all —
Line Voltage 108/115/122/216/244 VAC ±10%,selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz.
Thermal Protection Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Power Consumption 475W with plug-in
Cooling AC Fan
Trigger Modes AC/DC/AC LF Reject, and HF Sync
Anode Potential 10 kV (relative to cathode)
Screen Area 6 cm × 10 cm
Construction Aluminum alloy chassis. Anodized front panel
Weight 61,5 lbs / 27,8 kg

Links

Documents Referencing 531

Document Class Title Authors Year Links
IBM 223-6725-2.pdf Application Note Tektronix oscilloscopes (IBM Customer Engineering Manual) 1960 310 • 310A • 531 • 531A • 535 • 535A • 545A • B • C • CA • D • G

Documents Referencing 531A

Document Class Title Authors Year Links
IBM 223-6725-2.pdf Application Note Tektronix oscilloscopes (IBM Customer Engineering Manual) 1960 310 • 310A • 531 • 531A • 535 • 535A • 545A • B • C • CA • D • G

Pictures

531

531A

  • 531A on 202 cart

    531A on 202 cart

  • 531A on 500/53cart

    531A on 500/53cart

  • 531A Overwiev

    531A Overwiev

  • 531A Front

    531A Front

  • 531A Timebase ciruit

    531A Timebase ciruit

  • 531A Power supply

    531A Power supply

  • 531A Rectifier board

    531A Rectifier board

  • 531A Inside left

    531A Inside left

  • 531A Vertical amplifier

    531A Vertical amplifier

  • 531A Inside right

    531A Inside right

  • manual compartment

    manual compartment

RM31A

  • RM31A

    RM31A

Components

Some Parts Used in the 531

Part Part Number(s) Class Description Used in
120-037 120-037 Discrete component power transformer 531 • 533
12AX7 154-043 • 154-0043-00 Vacuum Tube (Dual Triode) dual triode 3C66 • 513 • 524 • 531 • 531A • 535 • 536 • 545 • 545A • 545B • 546 • 547 • 549 • 555 • 570 • 581 • 581A • 585 • 585A • E • Q • Hickok 1825 • Keithley 610
12BY7A 154-047 • 154-0047-00 Vacuum Tube (Pentode) miniature 6.5 W power pentode 106 • 163 • 524 • 531 • 533 • 535 • 536 • 541 • 543 • 535 • 545 • 545A • 549 • 555 • 75 • 3A75 • 3B5
5651 154-052 • 154-0052-00 • 154-0288-00 Gas Discharge Tube (Voltage regulator) 87 V voltage reference 128 • 160 • 310 • 310A • 502 • 503 • 504 • 511A • 512 • 516 • 517 • 524 • 526 • 531 • 531A • 535 • 536 • 541 • 541A • 543 • 543A • 543B • 545 • 545A • 545B • 570 • 549 • 581 • 581A • 585 • 585A
5BG 154-0080-00 • 154-0081-00 • 154-0082-00 • 154-0083-00 • 154-0124-00 CRT series of 5" CRTs 513 • 531 • 535
6197 154-0146-00 Vacuum Tube (Pentode) 7.5 W power pentode 516 • 531 • 533 • 535 • 535A • 547 • 556 • 75 • 3A75
6AU5 154-021 • 154-0021-00 Vacuum Tube (Pentode) 10 W beam power pentode 507 • 513 • 516 • 517 • 517A • 531 • 535 • 541 • 535 • 545 • 547 • 581 • 581A • 585 • 585A
6AU6 154-0022-00 • 157-0073-00 • 157-0059-00 • 154-0284-00 Vacuum Tube (Pentode) RF pentode 107 • 160 • 181 • 190 • 60 • 2A60 • 72 • 3A72 • 3C66 • 310 • 310A • 316 • 317 • 360 • 502 • 502A • 506 • 511 • 511A • 512 • 513 • 516 • 517 • 517A • 524 • 526 • 529 • RM529 • 531 • 531A • 535 • 536 • 545 • 545A • 546 • 547 • 549 • 555 • 561 • 561A • 561S • 564 • 565 • 567 • 570 • 575 • 581 • 581A • 585 • 585A • 80 • C • CA • Q
6BQ7A 154-028 • 154-0028-00 • 157-0022-00 • 157-0003-00 Vacuum Tube (Dual Triode) dual triode 107 • 163 • 181 • 310 • 315 • 316 • 360 • 524 • 531 • 532 • 535 • 536 • 541 • 545 • 570 • T
6CL6 154-031 • 154-0031-00 • 154-0286-00 Vacuum Tube (Pentode) 7.5 W power pentode 132 • 310 • 310A • 316 • 317 • 515 • 524 • 525 • 531 • 535 • 535A • 545 • 545A • 545B • 549 • 570 • 581 • 581A • 585 • 585A • 3A74
T51 154-0080-00 • 154-0081-00 • 154-0082-00 • 154-0083-00 • 154-0092-00 • 154-0096-00 • 154-0101-00 • 154-0117-00 • 154-0121-00 • 154-0123-00 • 154-0124-00 • 154-0117-00 • 154-0150-00 • 154-0197-00 • 154-0342-00 • 154-0379-00 CRT 5" CRT 513 • 531 • 535


Some Parts Used in the 531A

Part Part Number(s) Class Description Used in
12AX7 154-043 • 154-0043-00 Vacuum Tube (Dual Triode) dual triode 3C66 • 513 • 524 • 531 • 531A • 535 • 536 • 545 • 545A • 545B • 546 • 547 • 549 • 555 • 570 • 581 • 581A • 585 • 585A • E • Q • Hickok 1825 • Keithley 610
5651 154-052 • 154-0052-00 • 154-0288-00 Gas Discharge Tube (Voltage regulator) 87 V voltage reference 128 • 160 • 310 • 310A • 502 • 503 • 504 • 511A • 512 • 516 • 517 • 524 • 526 • 531 • 531A • 535 • 536 • 541 • 541A • 543 • 543A • 543B • 545 • 545A • 545B • 570 • 549 • 581 • 581A • 585 • 585A
6AU6 154-0022-00 • 157-0073-00 • 157-0059-00 • 154-0284-00 Vacuum Tube (Pentode) RF pentode 107 • 160 • 181 • 190 • 60 • 2A60 • 72 • 3A72 • 3C66 • 310 • 310A • 316 • 317 • 360 • 502 • 502A • 506 • 511 • 511A • 512 • 513 • 516 • 517 • 517A • 524 • 526 • 529 • RM529 • 531 • 531A • 535 • 536 • 545 • 545A • 546 • 547 • 549 • 555 • 561 • 561A • 561S • 564 • 565 • 567 • 570 • 575 • 581 • 581A • 585 • 585A • 80 • C • CA • Q
T5330 154-0178-00 • 154-0165-00 • 154-0179-00 • 154-0180-00 • 154-0350-00 CRT 5" CRT RM31A • RM33 • RM33A • RM35A • 531A • 533 • 533A • 535A


Some Parts Used in the RM31A

Part Part Number(s) Class Description Used in
T5330 154-0178-00 • 154-0165-00 • 154-0179-00 • 154-0180-00 • 154-0350-00 CRT 5" CRT RM31A • RM33 • RM33A • RM35A • 531A • 533 • 533A • 535A
Retrieved from "https://w140.com/tekwiki/index.php?title=531&oldid=95040"